Control power describes the magnitude of the aerodynamic force or moment that a control system can produce. Control authority describes the available range of control action and the ability to achieve the required aircraft response under specified conditions. Adequate control power is needed to establish trim, counter disturbances, and perform required manoeuvres. Control authority may be limited by maximum control-surface deflection, actuator capability, structural load limits, aerodynamic effectiveness, or flight conditions. Engineers evaluate available control margins to ensure that an aircraft retains sufficient controllability throughout its approved operating envelope. Control power and authority are related, but they are not identical: one describes the strength of the aerodynamic response, while the other describes the available control capability.
Control Power and Authority
Explains control power as the strength of an aerodynamic response and control authority as the available range and capability of the aircraft's control system.
Simplified control-moment contribution: Delta C_m = C_m_delta_e * Delta delta_e
Explanation
Variables
| Symbol | Name | Unit | Description | Meaning |
|---|---|---|---|---|
Delta C_m | Change in pitching-moment coefficient | Dimensionless | The change in pitching-moment coefficient associated with a control-surface deflection. | The change in pitching-moment coefficient associated with a control-surface deflection. |
C_m_delta_e | Elevator control derivative | Per radian | The change in pitching-moment coefficient per unit elevator deflection. | The change in pitching-moment coefficient per unit elevator deflection. |
Delta delta_e | Change in elevator deflection | Radians | The change in elevator control-surface angle. | The change in elevator control-surface angle. |
Example or application
An aircraft may have sufficient aerodynamic control power to produce a required pitching moment, but its available control authority can still be limited by the maximum permitted elevator deflection or actuator capability.
Key Points
Control power describes the strength of the aerodynamic response.
Control authority describes the available control range and capability.
Control power is important for trim and manoeuvring.
Maximum control-surface deflection can limit control authority.
Actuator capability and structural limits also influence control authority.
Aerodynamic effectiveness changes with flight conditions.
Engineers assess control margins throughout the operating envelope.
Applications
Flight-control system sizing
Aircraft controllability assessment
Control-surface design
Flight-envelope evaluation
Aircraft performance and handling analysis
Common Mistakes
Treating control power and control authority as identical.
Ignoring actuator and structural limitations.
Assuming maximum control deflection always produces a proportional increase in aerodynamic response.
Evaluating control capability at only one flight condition.
Learning Outcomes
Define control power and control authority.
Explain the difference between the two concepts.
Identify common limitations on available control authority.
Interpret a simplified control-moment relationship.
Recognize the importance of control margins.
Practice Questions
| Question | Answer |
|---|---|
What is the difference between control power and control authority? | Control power describes the strength of the aerodynamic response, while control authority describes the available control capability and range. |
Name two factors that can limit control authority. | Maximum control-surface deflection and actuator capability. |
Related Concepts
Control Surface Effectiveness
Aircraft Control Derivatives
Stability Augmentation Systems
Aircraft Controllability
Flight Envelope
Sources and verification
Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.
- Stevens, Lewis, and Johnson, Aircraft Control and Simulation; Nelson, Flight Stability and Automatic Control.
Suggest a correction or source · More in Aerospace Engineering