✦ScienexySCIENCE KNOWLEDGE LIBRARY
Science reference · SCI-ENG-008-172

Classical Feedback Control

Explains how feedback control compares a measured aircraft response with a desired reference and uses the resulting error to generate corrective control action.

Error signal: e(t) = r(t) - y(t)

Explanation

Classical feedback control uses measurements of a system's output to adjust its input and reduce the difference between the desired and actual response. In an aircraft, sensors may measure variables such as altitude, heading, pitch attitude, or angular rate. A controller compares the measured value with the commanded reference and calculates an error signal. It then generates a control command that is sent to an actuator or flight-control mechanism. The aircraft responds to this command, and its updated motion is measured again, completing the feedback loop. Feedback can improve tracking accuracy and disturbance rejection. However, poor controller design may produce excessive overshoot, oscillation, or instability. Engineers therefore evaluate feedback-system stability, response speed, sensor behaviour, and actuator limitations.

Variables

SymbolNameUnitDescriptionMeaning

e(t)

Error signal

Depends on the controlled variable

The difference between the reference command and measured output.

The difference between the reference command and measured output.

r(t)

Reference input

Depends on the controlled variable

The desired value or command supplied to the control system.

The desired value or command supplied to the control system.

y(t)

Measured output

Depends on the controlled variable

The measured or estimated value of the aircraft variable being controlled.

The measured or estimated value of the aircraft variable being controlled.

Example or application

In an altitude-control system, the controller compares the selected altitude with the measured altitude. The resulting error is used to generate corrective commands intended to reduce the difference.

Key Points

  • Feedback compares measured output with a reference command.

  • The difference between them is called the error signal.

  • Sensors provide information about aircraft motion or condition.

  • The controller generates corrective control commands.

  • Actuators carry out the control commands.

  • Feedback can improve tracking and disturbance rejection.

  • Poor controller design can cause overshoot or instability.

Applications

  • Autopilot systems

  • Altitude-hold systems

  • Heading-control systems

  • Aircraft attitude control

  • Flight-control research

Common Mistakes

  • Confusing the reference command with the measured output.

  • Reversing the sign of the error definition.

  • Assuming feedback always improves stability.

  • Ignoring sensor noise and actuator limitations.

Learning Outcomes

  • Define classical feedback control.

  • Identify the main elements of a feedback loop.

  • Calculate an error signal from a reference and measured output.

  • Explain how corrective control action is generated.

  • Recognize possible problems caused by poor controller design.

Practice Questions

QuestionAnswer

What is the error signal in a feedback-control system?

It is the difference between the reference command and the measured output.

Name two important elements of an aircraft feedback-control loop.

Sensors and a controller. Actuators are also important elements.

Related Concepts

  • Transfer Functions in Flight Dynamics

  • PID Control Systems

  • Stability Augmentation Systems

  • Aircraft Sensors and Actuators

  • Classical Control Theory

Sources and verification

Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.

  • Ogata, Modern Control Engineering; Stevens, Lewis, and Johnson, Aircraft Control and Simulation.

Suggest a correction or source · More in Aerospace Engineering