✦ScienexySCIENCE KNOWLEDGE LIBRARY
Science reference · SCI-ENG-008-173

PID Control Systems

Introduces proportional-integral-derivative controllers and explains how their three control actions respond to present, accumulated, and changing error.

u(t) = K_p*e(t) + K_i*integral(e(t) dt) + K_d*de(t)/dt

Explanation

A proportional-integral-derivative (PID) controller is a feedback controller that combines three control actions. The proportional term responds to the current error, the integral term responds to the accumulated error over time, and the derivative term responds to the rate at which the error changes. These actions are combined to generate a control signal. In aircraft engineering, PID controllers may be used in suitable control loops for variables such as heading, altitude, or attitude. The proportional gain influences the response to present error, the integral gain influences the correction of persistent error, and the derivative gain influences the response to changing error. Controller gains must be selected carefully because excessive gain or poor tuning can produce overshoot, oscillation, or instability. Practical systems may also include filtering, output limits, and additional control logic.

Variables

SymbolNameUnitDescriptionMeaning

u(t)

Controller output

Depends on the actuator command

The control signal generated by the PID controller.

The control signal generated by the PID controller.

e(t)

Error signal

Depends on the controlled variable

The difference between the reference command and measured output.

The difference between the reference command and measured output.

K_p

Proportional gain

Controller-dependent

Determines the proportional response to current error.

Determines the proportional response to current error.

K_i

Integral gain

Controller-dependent

Determines the contribution from accumulated error.

Determines the contribution from accumulated error.

K_d

Derivative gain

Controller-dependent

Determines the contribution from the rate of change of error.

Determines the contribution from the rate of change of error.

Example or application

An aircraft heading-control loop can use a PID controller to compare commanded heading with measured heading and generate corrective control commands based on the present, accumulated, and changing error.

Key Points

  • PID stands for proportional, integral, and derivative.

  • Proportional action responds to current error.

  • Integral action responds to accumulated error.

  • Derivative action responds to the rate of error change.

  • The three actions are combined to produce a control signal.

  • PID gains influence controller behaviour.

  • Poor tuning can cause overshoot, oscillation, or instability.

Applications

  • Autopilot control loops

  • Heading and altitude control

  • Aircraft attitude-control systems

  • Flight-control simulation

  • Engineering control-system research

Common Mistakes

  • Confusing the roles of proportional, integral, and derivative actions.

  • Assuming increasing every gain always improves performance.

  • Ignoring the effect of derivative action on measurement noise.

  • Assuming every aircraft control system uses a basic PID controller without additional logic.

Learning Outcomes

  • Define a PID controller.

  • Explain the function of proportional action.

  • Explain the function of integral action.

  • Explain the function of derivative action.

  • Identify how controller gains influence response.

  • Recognize the importance of controller tuning.

Practice Questions

QuestionAnswer

Which PID term responds to accumulated error?

The integral term.

What can happen when a PID controller is poorly tuned?

It may produce excessive overshoot, oscillation, or instability.

Related Concepts

  • Classical Feedback Control

  • Stability Augmentation Systems

  • Transfer Functions in Flight Dynamics

  • Aircraft Sensors and Actuators

  • Control-System Tuning

Sources and verification

Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.

  • Ogata, Modern Control Engineering; Stevens, Lewis, and Johnson, Aircraft Control and Simulation.

Suggest a correction or source · More in Aerospace Engineering