✦ScienexySCIENCE KNOWLEDGE LIBRARY
Science reference · SCI-ENG-008-193

Gas Turbine Turbine Stages

A gas turbine turbine stage extracts energy from hot combustion gases. In an axial turbine, stationary nozzle guide vanes direct the gas toward rotating blades, which convert part of its energy into shaft work.

w_t = h_0,in - h_0,out; P_t = ṁw_t

Explanation

The turbine section of a gas turbine engine extracts energy from high-temperature, high-pressure combustion gases. In an axial turbine, each stage commonly contains stationary nozzle guide vanes followed by rotating turbine blades. The stationary vanes direct and accelerate the gas toward the rotor at a suitable angle. The rotor blades extract energy from the gas and convert part of it into shaft work. This work drives the compressor and, depending on engine architecture, may also drive a fan, propeller, or external mechanical load. Turbine stages must withstand high temperatures, centrifugal stresses, and aerodynamic loads. Their design therefore depends on suitable materials, cooling methods, and aerodynamic performance.

Variables

SymbolMeaningUnit

w_t

Specific turbine work

J/kg

h_0,in

Inlet stagnation enthalpy

J/kg

h_0,out

Outlet stagnation enthalpy

J/kg

P_t

Turbine power

W

ṁ

Mass flow rate

kg/s

Example or application

Problem: A turbine has an inlet stagnation enthalpy of 1,500 kJ/kg and an outlet stagnation enthalpy of 1,000 kJ/kg. Calculate the specific turbine work. Solution: w_t = 1,500 - 1,000 = 500 kJ/kg. Answer: The specific turbine work is 500 kJ/kg.

Key Points

  • The turbine extracts energy from hot combustion gases.

  • Nozzle guide vanes direct and accelerate the flow.

  • Rotor blades extract energy and produce shaft work.

  • The turbine drives the compressor and other engine components.

  • Turbine stages operate under demanding thermal and mechanical conditions.

Applications

  • Turbojet engines

  • Turbofan engines

  • Turboprop engines

  • Turboshaft engines

Common Mistakes

  • Confusing stationary nozzle guide vanes with rotating turbine blades.

  • Assuming the turbine extracts all the energy from the gas flow.

  • Ignoring the effect of turbine cooling on engine performance.

Learning Outcomes

  • Describe the main components of an axial turbine stage.

  • Explain how turbine blades extract energy from hot gases.

  • Define specific turbine work.

  • Calculate turbine power using mass flow rate and specific work.

Practice Questions

QuestionAnswer

What is the function of nozzle guide vanes in an axial turbine?

They direct and accelerate the gas toward the rotating turbine blades at a suitable angle.

A turbine produces 400 kJ/kg of specific work at a mass flow rate of 5 kg/s. What is its power output?

P_t = 5 × 400 = 2,000 kW, or 2 MW.

Related Concepts

  • Combustion Chambers

  • Turbine Blade Cooling

  • Exhaust Nozzles and Expansion

Sources and verification

Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.

  • FAA – Aviation Maintenance Technician Handbook: Powerplant
  • Gas Turbine Theory, H. I. H. Saravanamuttoo and collaborators

Suggest a correction or source · More in Aerospace Engineering