✦ScienexySCIENCE KNOWLEDGE LIBRARY
Science reference · SCI-ENG-008-314

Command and Data Handling Systems

Command and Data Handling (C&DH) systems receive spacecraft commands, process onboard information, manage data storage, and coordinate communication between subsystems.

Data volume: D = r × t

Explanation

The command and data handling system is the information-processing center of a spacecraft. It receives commands from ground control, interprets them, and distributes appropriate instructions to spacecraft subsystems. It also collects measurements from sensors and equipment, organizes the resulting telemetry, and manages onboard data storage. C&DH systems may include processors, memory, data buses, interfaces, timing functions, and fault-management software. They must operate reliably despite limited resources, radiation exposure, and communication delays. Their architecture supports both routine operations and responses to detected spacecraft anomalies.

Variables

SymbolNameUnitMeaning

D

Data volume

bits or bytes

Data volume

r

Data generation rate

bits/s or bytes/s

Data generation rate

t

Time interval

s

Time interval

Example or application

A spacecraft computer receives a command from Earth, processes it, and sends the appropriate instruction to an onboard subsystem while recording the resulting status information.

Key Points

  • C&DH manages spacecraft commands and data.

  • It distributes instructions to onboard subsystems.

  • It collects and stores telemetry information.

  • Data buses connect spacecraft electronic units.

  • Fault management supports continued spacecraft operation.

Applications

  • Satellite command processing.

  • Scientific data collection.

  • Spacecraft health monitoring.

  • Autonomous spacecraft operations.

  • Deep-space mission data management.

Common Mistakes

  • Confusing command processing with communication transmission.

  • Assuming all spacecraft data is sent to Earth immediately.

  • Ignoring onboard data storage limits.

  • Treating C&DH as only a single computer.

Learning Outcomes

  • Define a command and data handling system.

  • Identify its major components and functions.

  • Distinguish commands from telemetry data.

  • Explain why onboard data storage is necessary.

Practice Questions

QuestionAnswer

What does a spacecraft C&DH system do?

It processes commands, collects and manages data, and coordinates information exchange between spacecraft subsystems.

What is telemetry in a spacecraft system?

Telemetry is information sent from the spacecraft to a receiving system for monitoring and analysis.

Related Concepts

  • Telemetry, Tracking and Command

  • Spacecraft Antennas and Communication Links

  • Embedded Software in Avionics

  • Spacecraft Reliability and Redundancy

Sources and verification

Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.

  • NASA spacecraft systems engineering references; NASA Systems Engineering Handbook.

Suggest a correction or source · More in Aerospace Engineering