Turbulent flow contains irregular velocity and pressure fluctuations across many spatial and temporal scales. Resolving every turbulent motion directly can require extremely high computational resources. Turbulence models approximate the effects of unresolved fluctuations on the average or filtered flow. Common Reynolds-averaged Navier–Stokes models include the k–epsilon and k–omega families. Large Eddy Simulation resolves larger turbulent structures while modeling smaller ones. Direct Numerical Simulation resolves all relevant turbulent scales but is computationally expensive for most engineering applications. Model selection depends on the flow physics, required accuracy, and available computational resources.
Turbulence Models in CFD
Turbulence models approximate the effects of complex turbulent fluctuations so that practical engineering flow simulations can be performed.
Reynolds decomposition: u = ū + u′
Explanation
Variables
| Symbol | Meaning | Unit |
|---|---|---|
u | Instantaneous velocity | m/s |
ū | Mean velocity | m/s |
u′ | Fluctuating velocity component | m/s |
Example or application
An engineer uses a k–omega SST turbulence model to estimate airflow near an aircraft wing where boundary-layer behavior is important.
Key Points
Turbulence contains irregular and interacting flow fluctuations.
Turbulence models approximate unresolved flow behavior.
RANS models are common in engineering applications.
LES resolves large turbulent structures.
DNS requires very high computational resources.
Applications
Aircraft boundary-layer analysis
Jet-engine flow simulation
Wake prediction
Industrial mixing and heat transfer
Common Mistakes
Assuming one turbulence model is suitable for every flow.
Treating RANS, LES, and DNS as identical approaches.
Ignoring model limitations near separation or strong pressure gradients.
Learning Outcomes
Explain why turbulence models are required.
Distinguish RANS, LES, and DNS.
Recognize common turbulence-model families.
Identify factors affecting model selection.
Practice Questions
| Question | Answer |
|---|---|
Why are turbulence models used in CFD? | They approximate unresolved turbulent effects while reducing computational requirements. |
Which method resolves large turbulent structures and models smaller ones? | Large Eddy Simulation (LES). |
Related Concepts
Turbulent Flow
Navier–Stokes Equations
Boundary Layers
CFD Validation
Sources and verification
Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.
- Wilcox, Turbulence Modeling for CFD; Pope, Turbulent Flows.
Suggest a correction or source · More in Aerospace Engineering