✦ScienexySCIENCE KNOWLEDGE LIBRARY
topic · SCI-MAT-002-026

Decimal Numbers and Place Value

An introduction to decimal numbers and the base-ten place-value system, explaining decimal notation, whole-number and fractional places, digit values, and the representation of quantities between integers.

NameExpressionDescription

Expanded Decimal Form

a.bcd = a + b/10 + c/100 + d/1000

Expresses a decimal number as the sum of its whole-number part and the values of its decimal digits.

Tenths Place

b/10

Represents the value contributed by the first digit after the decimal point.

Hundredths Place

c/100

Represents the value contributed by the second digit after the decimal point.

Thousandths Place

d/1000

Represents the value contributed by the third digit after the decimal point.

Place Value of a Digit

Digit Value = Digit × Place Value

Determines the contribution of a digit by multiplying it by the value of its position.

Explanation

Decimal numbers are numbers written using a decimal point to separate the whole-number part from the fractional part. They are based on the decimal or base-ten number system, in which each position represents a power of ten. To the left of the decimal point are the ones, tens, hundreds, and other whole-number places. To the right are the tenths, hundredths, thousandths, and smaller fractional places. For example, in the number 24.375, the digit 2 represents two tens, 4 represents four ones, 3 represents three tenths, 7 represents seven hundredths, and 5 represents five thousandths. Place value determines the actual contribution of each digit to the number. Decimal notation makes it possible to express values between whole numbers and is widely used in measurements, money, science, engineering, and everyday calculations. Understanding decimal place value is essential for comparing decimals, rounding numbers, performing arithmetic operations, and converting between fractions and decimal forms.

Variables

SymbolMeaning

a

The whole-number part in the illustrative decimal expression.

b

The first digit after the decimal point, representing tenths.

c

The second digit after the decimal point, representing hundredths.

d

The third digit after the decimal point, representing thousandths.

10

The base-ten factor associated with the tenths place.

100

The base-ten factor associated with the hundredths place.

1000

The base-ten factor associated with the thousandths place.

Example or application

A worked example has not yet been added.

Definition

A decimal number is a number expressed in base-ten notation using a decimal point to separate its whole-number part from its fractional part. Place value is the numerical value assigned to a digit according to its position in a number.

Purpose

To represent whole and fractional quantities using the base-ten system, understand the value of individual digits, and develop the foundation for decimal comparison, rounding, and arithmetic operations.

Importance

Decimals are essential for precise measurements, financial calculations, scientific data, engineering, and numerical representation. Place-value understanding helps prevent calculation errors and supports accurate mathematical reasoning.

Key Concepts

  • Decimal notation

  • Decimal point

  • Whole-number places

  • Fractional decimal places

  • Tenths and hundredths

  • Thousandths

  • Base-ten place-value system

  • Expanded decimal form

  • Trailing zeros

Characteristics

  • Decimal numbers use the base-ten number system.

  • The decimal point separates the whole-number part from the fractional part.

  • Each position to the left of the decimal point represents a power of ten.

  • Each position to the right of the decimal point represents a negative power of ten.

  • A digit's value depends on its position in the number.

  • Adding zeros to the right of the final nonzero decimal digit does not change the numerical value.

  • Decimals can represent terminating or non-terminating values.

Types

NameDescription

Terminating Decimals

Decimal numbers with a finite number of digits after the decimal point, such as 0.25 and 3.125.

Non-Terminating Repeating Decimals

Decimal numbers with an infinite sequence of digits in which a digit or group of digits repeats, such as 0.333... and 0.272727...

Non-Terminating Non-Repeating Decimals

Decimal numbers with infinitely many digits after the decimal point and no repeating pattern, such as the decimal expansion of π.

Finite Place-Value Decimals

Decimal expressions used to represent quantities up to a specified place, such as tenths, hundredths, or thousandths.

Components

NameDescription

Whole-Number Part

The portion of a decimal number to the left of the decimal point.

Decimal Point

The symbol that separates the whole-number part from the fractional decimal part.

Fractional Part

The portion of a decimal number to the right of the decimal point.

Place Value

The value represented by a digit according to its position in the number.

Digit

A numerical symbol from 0 to 9 used to construct decimal numbers.

Properties

  • The decimal point separates the whole-number and fractional parts of a decimal number.

  • Each position to the left of the decimal point has ten times the value of the position immediately to its right.

  • Each position to the right of the decimal point has one-tenth the value of the position immediately to its left.

  • A zero placed at the end of a terminating decimal does not change its value.

  • Zeros between nonzero digits are significant to the numerical value and cannot be removed freely.

  • A decimal number can be expressed as a fraction with a denominator that is a power of ten when it terminates.

  • The value of a decimal digit depends on its position rather than only its numerical symbol.

Examples

ProblemSolutionExplanation

Identify the place value of each digit in 24.375.

2 = tens; 4 = ones; 3 = tenths; 7 = hundredths; 5 = thousandths.

The position of each digit determines its value. Digits to the left of the decimal point represent whole-number places, while digits to the right represent fractional places.

Write 6.482 in expanded form.

6.482 = 6 + 4/10 + 8/100 + 2/1000.

The number is separated into its individual place-value contributions: six ones, four tenths, eight hundredths, and two thousandths.

Determine whether 3.500 and 3.5 represent the same value.

Yes, 3.500 = 3.5.

The zeros at the end of a terminating decimal do not change its value because they add no additional nonzero fractional contribution.

Applications

  • Representing money and prices in financial transactions.

  • Measuring length, mass, temperature, and time.

  • Recording scientific measurements and experimental results.

  • Representing numerical values in engineering and technical calculations.

  • Expressing quantities that fall between consecutive whole numbers.

Prerequisites

  • Understanding whole numbers and place value.

  • Basic knowledge of fractions.

  • Familiarity with powers of ten.

  • Understanding of numerical notation and mathematical symbols.

Learning Objectives

  • Define decimal numbers and place value.

  • Identify the decimal point and the parts of a decimal number.

  • Recognize tenths, hundredths, and thousandths.

  • Determine the place value of individual digits.

  • Write decimal numbers in expanded form.

  • Explain why trailing zeros do not change the value of a terminating decimal.

  • Distinguish between different types of decimal expansions.

Common Mistakes

  • Confusing tenths with hundredths or thousandths.

  • Ignoring the position of a digit when determining its value.

  • Assuming that a decimal with more digits is always greater.

  • Removing zeros between nonzero digits and changing the number's value.

  • Believing that adding zeros at the end of a terminating decimal changes its value.

  • Misplacing the decimal point when expressing a number in expanded form.

Practice Questions

  • What is a decimal number?

  • What is the role of the decimal point?

  • What is the difference between tenths and hundredths?

  • Write 8.306 in expanded form.

  • What is the place value of 7 in 12.475?

  • Why are 4.20 and 4.2 numerically equal?

Key Takeaway

Decimal numbers use the base-ten place-value system to represent whole and fractional quantities. Understanding the position and value of each digit is essential for accurate decimal calculations and numerical comparisons.

Related Topics

  • SCI-MAT-002-021

  • SCI-MAT-002-027

  • SCI-MAT-002-028

  • SCI-MAT-002-029

  • SCI-MAT-002-030

Sources and verification

Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.

  • Source verification pending; check an authoritative textbook, university, standards body, or peer-reviewed source.

Suggest a correction or source · More in Arithmetic & Number Theory