✦ScienexySCIENCE KNOWLEDGE LIBRARY
reference · SCI-MAT-006-009

Degrees, Minutes and Seconds

Degrees, minutes, and seconds form a sexagesimal system for expressing angular measurements with greater precision. One degree contains 60 minutes, and one minute contains 60 seconds.

  • 1° = 60′

  • 1′ = 60″

  • 1° = 3600″

  • Decimal degrees = D + M/60 + S/3600

  • Minutes = fractional degree × 60

  • Seconds = fractional minute × 60

Explanation

Degrees, minutes, and seconds are units used to express angular measurements in a base-60, or sexagesimal, system. A complete revolution contains 360 degrees. Each degree is divided into 60 angular minutes, and each angular minute is divided into 60 angular seconds. The symbols are ° for degrees, ′ for minutes, and ″ for seconds. For example, 25° 30′ 15″ represents 25 degrees, 30 minutes, and 15 seconds. These angular minutes and seconds are not the same as units of time, even though they use similar names and symbols. The system is useful when measurements require more detail than whole degrees provide. It is commonly encountered in surveying, cartography, navigation, astronomy, and historical mathematical tables. A measurement may be converted into decimal degrees by dividing minutes by 60 and seconds by 3600. Conversely, decimal degrees can be converted into degrees, minutes, and seconds by separating the whole-degree part and converting the fractional part successively into minutes and seconds.

Variables

  • D = whole degrees

  • M = angular minutes

  • S = angular seconds

  • ° = degree

  • ′ = angular minute

  • ″ = angular second

Example or application

The angle 32° 15′ means 32 degrees and 15 angular minutes. Since 15′ = 15/60° = 0.25°, the same angle in decimal-degree form is 32.25°.

Definition

Degrees, minutes, and seconds are subdivisions of angular measurement in which one degree equals 60 angular minutes and one angular minute equals 60 angular seconds.

Purpose

This system provides a convenient way to express angular measurements with precision while retaining degrees as the main unit.

Importance

Degrees, minutes, and seconds are important in surveying, astronomy, geographical coordinates, navigation, and technical measurements. They allow small angular differences to be expressed clearly and consistently.

Learning Objectives

  • Define degrees, angular minutes, and angular seconds.

  • Recall the relationships between the three units.

  • Convert degrees, minutes, and seconds into decimal degrees.

  • Convert decimal degrees into degrees, minutes, and seconds.

  • Distinguish angular minutes and seconds from time units.

  • Recognise practical fields that use sexagesimal angular measurement.

Key Concepts

  • One degree equals 60 angular minutes.

  • One angular minute equals 60 angular seconds.

  • One degree equals 3600 angular seconds.

  • The notation uses °, ′, and ″.

  • Decimal-degree conversion uses division by 60 and 3600.

  • The system is based on subdivisions of 60.

Working Principle

The sexagesimal system divides each degree into 60 equal minutes and each minute into 60 equal seconds. To convert the measurement into decimal degrees, the minute component is divided by 60 and the second component by 3600, then both are added to the degree component.

Process

For conversion to decimal degrees, retain the whole-degree value, divide the minutes by 60, divide the seconds by 3600, and add the results. For conversion from decimal degrees, separate the whole-degree part, multiply the remaining fractional part by 60 to obtain minutes, then multiply the remaining fractional minute by 60 to obtain seconds. Round only when the required precision is known.

Applications

  • Geographical coordinate measurement.

  • Land surveying and mapping.

  • Astronomical positions and celestial coordinates.

  • Navigation and direction measurement.

  • Technical drawings and angular specifications.

Worked Example

Convert 42° 18′ 36″ into decimal degrees. Decimal degrees = 42 + 18/60 + 36/3600. Since 18/60 = 0.3 and 36/3600 = 0.01, the result is 42.31°. Therefore, 42° 18′ 36″ = 42.31°.

Common Misconceptions

  • Angular minutes and seconds are not ordinary time units.

  • One degree contains 60 minutes, not 100.

  • One angular minute contains 60 seconds.

  • The seconds component must be divided by 3600 when converting directly to decimal degrees.

  • A decimal-degree value such as 42.31° does not mean 42° 31′.

Practice Questions

  • How many angular minutes are in 3°?

  • How many angular seconds are in 2°?

  • Convert 18° 24′ into decimal degrees.

  • Convert 75° 12′ 30″ into decimal degrees.

  • Convert 28.5° into degrees and minutes.

  • Explain why angular minutes should not be confused with minutes of time.

Key Takeaway

Degrees, minutes, and seconds provide a precise sexagesimal system for angular measurement. Remembering the 60-to-1 relationships makes conversion between this format and decimal degrees straightforward.

Prerequisites

  • Measuring Angles.

  • Basic fractions and decimal arithmetic.

  • Understanding of degrees as an angular unit.

Reference

  • NIST Special Publication 811, Guide for the Use of the International System of Units.

  • OpenStax, Precalculus 2e, Angles and Radian Measure.

  • National Geospatial-Intelligence Agency, publications on geographic coordinates and angular measurement.

Related Topics

  • Measuring Angles

  • Radian Measure of Angles

  • Conversion Between Degrees and Radians

  • Positive and Negative Angles

  • Angular Displacement

Sources and verification

Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.

  • Source verification pending; check an authoritative textbook, university, standards body, or peer-reviewed source.

Suggest a correction or source · More in Trigonometry