Degrees and radians describe the same geometric quantity but use different numerical scales. The relationship between them follows from a complete revolution: 360° = 2π radians. Dividing both sides by two gives 180° = π radians. This relationship provides the conversion factors. To convert degrees into radians, multiply the degree value by π/180. To convert radians into degrees, multiply the radian value by 180/π. Common conversions include 30° = π/6, 45° = π/4, 60° = π/3, 90° = π/2, 180° = π, 270° = 3π/2, and 360° = 2π. Exact answers are often left in terms of π because they are more precise than decimal approximations. When numerical evaluation is required, π may be approximated by 3.14159. Correct conversion is essential because calculators and mathematical formulas may use different angle modes. In calculus, radians are normally required for standard trigonometric derivative and integral formulas.
Conversion Between Degrees and Radians
Degrees and radians are two units for measuring angles. Their conversion is based on the equivalence 180° = π radians, which allows any angle to be expressed in either unit.
Radians = Degrees × π / 180
Degrees = Radians × 180 / π
180° = π rad
360° = 2π rad
90° = π/2 rad
Explanation
Variables
Degrees = angle measure in degrees
Radians = angle measure in radians
π = mathematical constant approximately equal to 3.14159
rad = radian unit
° = degree symbol
Example or application
Convert 60° into radians. Multiply by π/180: 60 × π/180 = π/3 radians. Therefore, 60° and π/3 radians represent the same angle.
Definition
Conversion between degrees and radians is the process of expressing an angle in one angular unit using its equivalent numerical value in the other unit.
Purpose
The purpose of degree-radian conversion is to express angular measurements in the unit most suitable for a calculation, mathematical model, or scientific application.
Importance
Conversion is essential when moving between elementary geometry, calculator settings, physics, and advanced mathematics. Incorrect angle units can produce incorrect trigonometric values, arc lengths, derivatives, and physical calculations.
Learning Objectives
Derive the conversion relationship from 180° = π radians.
Convert degrees into radians.
Convert radians into degrees.
Recognise common exact angle conversions.
Distinguish exact expressions involving π from decimal approximations.
Select the correct calculator angle mode for a problem.
Key Concepts
180° equals π radians.
Degree-to-radian conversion uses multiplication by π/180.
Radian-to-degree conversion uses multiplication by 180/π.
Exact answers are often expressed using π.
Calculator angle mode affects trigonometric evaluations.
Radian measure is the standard convention in calculus.
Working Principle
The conversion formulas are obtained from the equality 180° = π radians. Multiplying a degree measure by π/180 replaces the degree unit with its equivalent radian scale. Multiplying a radian measure by 180/π performs the reverse conversion.
Process
To convert degrees to radians, multiply the given degree value by π/180 and simplify the fraction. To convert radians to degrees, multiply by 180/π and simplify. Retain π for exact answers unless a decimal is requested. Before using a calculator, verify whether it is in degree or radian mode.
Applications
Evaluating trigonometric functions with calculators.
Solving calculus problems.
Calculating arc lengths and sector areas.
Analysing angular displacement and rotational motion.
Converting mathematical models between different conventions.
Worked Example
Convert 225° into radians. Radians = 225 × π/180 = 225π/180 = 5π/4 radians. Now convert 7π/6 radians into degrees: Degrees = (7π/6) × 180/π = 7 × 30 = 210°. Both conversions use exact values without approximating π.
Common Misconceptions
To convert degrees into radians, multiply by π/180, not 180/π.
To convert radians into degrees, multiply by 180/π, not π/180.
The angle itself does not change during conversion; only its numerical representation and unit change.
A calculator in degree mode may give an incorrect result when a radian input is intended.
A decimal approximation of π is not required when an exact answer is requested.
Practice Questions
Convert 45° into radians.
Convert 120° into radians.
Convert 315° into radians.
Convert π/5 radians into degrees.
Convert 11π/6 radians into degrees.
Why should exact answers involving π be retained when possible?
Key Takeaway
The equality 180° = π radians is the foundation of all degree-radian conversions. Memorising the two conversion factors and checking calculator mode prevents common errors.
Prerequisites
Degrees, Minutes and Seconds.
Radian Measure of Angles.
Basic fractions and algebraic simplification.
Reference
OpenStax, Precalculus 2e, Radian Measure.
OpenStax, Algebra and Trigonometry 2e, Angles and Radian Measure.
NIST Special Publication 811, Guide for the Use of the International System of Units.
Related Topics
Measuring Angles
Degrees, Minutes and Seconds
Radian Measure of Angles
Positive and Negative Angles
Coterminal Angles
Sources and verification
Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.
- Source verification pending; check an authoritative textbook, university, standards body, or peer-reviewed source.