✦ScienexySCIENCE KNOWLEDGE LIBRARY
reference · SCI-MAT-006-013

Coterminal Angles

Coterminal angles are angles in standard position that share the same terminal side. Their measures differ by an integer multiple of 360° or 2π radians.

  • θ₂ = θ₁ + 360°k

  • θ₂ = θ₁ + 2πk

  • k ∈ ℤ

  • sin(θ + 2πk) = sin θ

  • cos(θ + 2πk) = cos θ

Explanation

Two angles are coterminal when they are in standard position and their terminal sides coincide. This means that one angle can be obtained from the other by adding or subtracting one or more complete revolutions. Since a complete revolution measures 360° or 2π radians, coterminal angles differ by an integer multiple of these values. For example, 45°, 405°, and −315° are coterminal because each terminal side points in the same direction. Coterminal angles are useful when simplifying large or negative angle measures into a standard interval, such as 0° to 360° or 0 to 2π radians. They are especially important when evaluating trigonometric functions because coterminal angles have the same sine, cosine, and tangent values wherever those functions are defined. The concept also explains why trigonometric functions repeat their values after complete revolutions.

Variables

  • θ₁ = original angle

  • θ₂ = coterminal angle

  • k = any integer

  • ℤ = set of integers

  • θ = angle in radians in the trigonometric identities

Example or application

The angles 30° and 390° are coterminal because 390° = 30° + 360°. Both begin on the positive x-axis in standard position and end on the same terminal side.

Definition

Coterminal angles are directed angles in standard position that have the same terminal side and differ by an integer multiple of a full revolution.

Purpose

Coterminal angles provide a way to represent the same terminal direction using different amounts of rotation, allowing angles to be simplified and trigonometric values to be evaluated efficiently.

Importance

Coterminal angles are essential for understanding periodicity, reducing large angles, evaluating trigonometric functions, identifying terminal-side positions, and solving trigonometric equations.

Learning Objectives

  • Define coterminal angles.

  • Explain why angles differing by a complete revolution share a terminal side.

  • Generate positive and negative coterminal angles.

  • Find a coterminal angle within a specified interval.

  • Apply coterminal relationships in degrees and radians.

  • Connect coterminal angles with the periodicity of trigonometric functions.

Key Concepts

  • Coterminal angles share the same terminal side in standard position.

  • Their measures differ by multiples of 360° or 2π radians.

  • The integer multiplier may be positive, negative, or zero.

  • An angle has infinitely many coterminal angles.

  • Sine and cosine have the same values at coterminal angles.

  • Coterminal angles simplify the analysis of large and negative rotations.

Working Principle

A complete revolution returns a rotating ray to its original direction. Adding or subtracting any integer number of complete revolutions therefore leaves the terminal side unchanged. Algebraically, this is represented by adding 360°k or 2πk to the original angle.

Process

Start with the original angle. Choose the required unit and add or subtract complete revolutions. For degrees, use 360°; for radians, use 2π. If a particular interval is requested, continue adjusting by complete revolutions until the angle falls within that interval. Verify that the result differs from the original by an integer multiple of a full revolution.

Applications

  • Reducing large angles before evaluating trigonometric functions.

  • Simplifying negative angles.

  • Understanding periodic trigonometric graphs.

  • Analysing repeated rotations and circular motion.

  • Solving trigonometric equations and identifying equivalent directions.

Worked Example

Find the coterminal angle of 765° in the interval 0° ≤ θ < 360°. Subtract 360° twice: 765° − 360° − 360° = 45°. Therefore, 45° is the required coterminal angle. The original rotation contains two complete revolutions plus an additional 45°.

Common Misconceptions

  • Coterminal angles do not need to have the same numerical value.

  • Two angles are not coterminal merely because their numerical difference is any number; the difference must be a whole number multiple of 360° or 2π.

  • Every angle has infinitely many coterminal angles.

  • Coterminal angles share a terminal side but may represent different amounts and directions of rotation.

  • The sine and cosine periodicity formulas use radians when written with 2π.

Practice Questions

  • Find two positive coterminal angles for 70°.

  • Find two negative coterminal angles for 120°.

  • Reduce 810° to an angle between 0° and 360°.

  • Find a coterminal angle for −5π/6 in the interval 0 ≤ θ < 2π.

  • Why do coterminal angles have the same sine and cosine values?

  • Explain why an angle has infinitely many coterminal angles.

Key Takeaway

Coterminal angles share a terminal side because they differ by complete revolutions. Adding or subtracting 360° or 2π radians provides a reliable method for finding equivalent angular positions.

Prerequisites

  • Positive and Negative Angles.

  • Standard Position of an Angle.

  • Conversion Between Degrees and Radians.

Reference

  • OpenStax, Precalculus 2e, Angles and the Unit Circle.

  • OpenStax, Algebra and Trigonometry 2e, Angles.

  • NIST Digital Library of Mathematical Functions, Trigonometric Functions.

Related Topics

  • Positive and Negative Angles

  • Standard Position of an Angle

  • Initial Side and Terminal Side

  • Quadrants and Their Angle Ranges

  • Reference Angles

Sources and verification

Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.

  • Source verification pending; check an authoritative textbook, university, standards body, or peer-reviewed source.

Suggest a correction or source · More in Trigonometry