✦ScienexySCIENCE KNOWLEDGE LIBRARY
reference · SCI-MAT-006-019

Arc Length and Central Angles

Arc length is the distance measured along a portion of a circle's circumference, while a central angle is an angle whose vertex is at the centre of the circle. Their relationship is expressed by s = rθ when θ is measured in radians.

  • s = rθ, where θ is measured in radians

  • θ = s / r

  • s = (θ / 360°) × 2πr, where θ is measured in degrees

  • C = 2πr

  • Chord length = 2r sin(θ/2), where θ is measured in radians

Explanation

An arc is a connected portion of a circle's circumference. The length of an arc is the distance measured along that curved portion, rather than the straight-line distance between its endpoints. A central angle is an angle whose vertex is located at the centre of the circle and whose sides are radii. The size of a central angle determines the fraction of the circumference occupied by its intercepted arc. When the angle is measured in radians, the relationship is especially simple: arc length equals radius multiplied by the angle, s = rθ. This formula follows directly from the definition of radian measure, θ = s/r. When the angle is measured in degrees, the arc length is the same fraction of the full circumference as the angle is of 360°. Therefore, s = (θ/360°) × 2πr. A larger radius or a larger central angle produces a longer arc. Arc-length calculations are important in circular motion, engineering, geometry, navigation, and the design of curved structures.

Variables

  • s = arc length

  • r = radius of the circle

  • θ = central angle

  • C = circumference

  • π = mathematical constant approximately equal to 3.14159

  • Chord length = straight-line distance between the endpoints of an arc

Example or application

A circle has radius 5 cm and a central angle of 2 radians. The arc length is s = rθ = 5 × 2 = 10 cm.

Definition

Arc length is the distance measured along a circular arc, and a central angle is an angle formed by two radii with its vertex at the centre of the circle.

Purpose

The purpose of the arc-length and central-angle relationship is to calculate curved distances from angular measurements and circle dimensions.

Importance

Arc length connects angular measurement with actual distance along a circular path. It is essential in wheel motion, gear design, mechanical engineering, curved construction, geometry, and many physical models involving rotation.

Learning Objectives

  • Define an arc and arc length.

  • Define a central angle.

  • Explain the relationship between arc length, radius, and radian measure.

  • Calculate arc length using radians.

  • Calculate arc length using degrees.

  • Distinguish arc length from chord length.

  • Apply arc-length calculations to circular-motion problems.

Key Concepts

  • An arc is a portion of a circle's circumference.

  • Arc length measures distance along the curved path.

  • A central angle has its vertex at the centre of the circle.

  • The radian relationship is s = rθ.

  • The angle must be in radians when using s = rθ.

  • The degree-based formula uses the fraction θ/360° of the full circumference.

  • Arc length and chord length are different measurements.

Working Principle

A central angle determines what fraction of a complete circle is covered by an arc. In radian measure, the ratio of arc length to radius is equal to the central angle. Multiplying the radius by the radian measure therefore gives the arc length directly. In degree measure, the fraction of the complete circumference is θ/360°.

Process

Identify the circle's radius and the central angle. Determine whether the angle is given in degrees or radians. If it is in degrees, either convert it to radians or use the degree-based formula. If it is in radians, multiply the radius by the angle. Check that the resulting unit is a length unit and distinguish the arc length from the straight chord connecting its endpoints.

Applications

  • Calculating the distance travelled by a rotating wheel.

  • Designing curved roads, tracks, and architectural structures.

  • Determining the length of circular mechanical components.

  • Analysing angular displacement in physics.

  • Calculating distances along circular paths.

  • Designing gears, pulleys, and rotating systems.

Worked Example

A circular track has a radius of 14 m. A runner travels along an arc subtended by a central angle of 45°. Find the arc length. Using the degree formula, s = (45°/360°) × 2π × 14 = (1/8) × 28π = 3.5π m ≈ 11.00 m. The runner travels approximately 11.00 m along the curved section.

Common Misconceptions

  • Arc length is measured along the circumference, not along the straight chord.

  • The formula s = rθ requires θ to be measured in radians.

  • The central angle has its vertex at the centre of the circle.

  • A larger radius produces a longer arc for the same central angle.

  • The same arc-length formula can be used for different circles only when the corresponding radius and angle are correctly identified.

Practice Questions

  • Define arc length and central angle.

  • Find the arc length when r = 6 cm and θ = 2.5 radians.

  • Find the arc length of a circle with radius 10 cm and central angle 72°.

  • A circle has an arc length of 15 cm and radius 5 cm. Find the central angle in radians.

  • Explain the difference between arc length and chord length.

  • Why must the angle be in radians when using s = rθ?

Key Takeaway

Arc length is directly proportional to both the radius and the central angle. The formula s = rθ provides a simple and powerful connection between circular distance and radian measure.

Prerequisites

  • Measuring Angles.

  • Radian Measure of Angles.

  • Conversion Between Degrees and Radians.

  • Understanding of circle radius and circumference.

Reference

  • OpenStax, Precalculus 2e, Radian Measure and Arc Length.

  • OpenStax, Algebra and Trigonometry 2e, Arc Length and Sector Area.

  • NIST Special Publication 811, Guide for the Use of the International System of Units.

Related Topics

  • Radian Measure of Angles

  • Conversion Between Degrees and Radians

  • Sector Area and Angular Measurement

  • Rotation and Angular Displacement

  • Circles and Circumference

Sources and verification

Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.

  • Source verification pending; check an authoritative textbook, university, standards body, or peer-reviewed source.

Suggest a correction or source · More in Trigonometry