A sector is a portion of a circular region enclosed by two radii and the arc connecting their endpoints. The central angle determines what fraction of the entire circle is occupied by the sector. A complete circle has a central angle of 360° or 2π radians and an area of πr². Therefore, a sector with central angle θ measured in degrees has area A = (θ/360°)πr². When θ is measured in radians, the formula becomes A = 1/2 r²θ. This radian formula follows because the fraction of the full circle is θ/(2π), so multiplying that fraction by πr² gives 1/2 r²θ. The sector may be a minor sector or a major sector, depending on whether its central angle is less than or greater than 180°. The area formula applies to either sector when the intended central angle is used. Sector area is closely related to arc length: arc length measures the curved boundary, while sector area measures the two-dimensional region enclosed by the radii and arc. These relationships are useful in geometry, engineering, design, land measurement, and physical applications involving circular regions.
Sector Area and Angular Measurement
A sector is a region of a circle bounded by two radii and the arc between them. Its area is proportional to its central angle and can be calculated using radians or degrees.
A = 1/2 r²θ, where θ is measured in radians
A = (θ / 360°)πr², where θ is measured in degrees
A_circle = πr²
s = rθ, where θ is measured in radians
A = 1/2 rs, for a sector with arc length s
Explanation
Variables
A = area of the sector
r = radius of the circle
θ = central angle
s = arc length
π = mathematical constant approximately equal to 3.14159
A_circle = total area of the circle
Example or application
A sector has radius 6 cm and central angle 90°. Since 90° is one-fourth of a full revolution, its area is one-fourth of the circle's area: A = (90/360) × π × 6² = 9π cm².
Definition
A sector is a region of a circle bounded by two radii and the intercepted arc, and its area is the fraction of the circle's total area determined by the central angle.
Purpose
Sector-area formulas allow learners to calculate the area of a portion of a circle using its radius and central angle, connecting angular measurement with two-dimensional geometry.
Importance
Sector area is important in circular design, engineering, land measurement, mechanical components, statistics, and practical calculations involving pie-shaped regions. It also demonstrates how angular measurement determines both curved distance and enclosed area.
Learning Objectives
Define a sector of a circle.
Distinguish between a sector, an arc, and a chord.
Calculate sector area using a degree measure.
Calculate sector area using a radian measure.
Explain the relationship between sector area and arc length.
Identify minor and major sectors.
Apply sector-area formulas to practical problems.
Key Concepts
A sector is bounded by two radii and an arc.
A complete circle has area πr².
The sector's area is proportional to its central angle.
The radian formula is A = 1/2 r²θ.
The degree formula is A = (θ/360°)πr².
Arc length and sector area measure different geometric quantities.
The formula A = 1/2 rs connects sector area with radius and arc length.
Working Principle
A sector occupies a fraction of the full circular region equal to its central angle divided by a complete revolution. In degrees, this fraction is θ/360°. In radians, it is θ/(2π). Multiplying the fraction by the total circle area πr² gives the sector area. Simplifying the radian expression produces A = 1/2 r²θ.
Process
Identify the radius and central angle of the sector. Check whether the angle is in degrees or radians. If it is in degrees, use the degree-based fraction of the circle's area. If it is in radians, use A = 1/2 r²θ. Substitute the values, calculate the area, and include squared length units. For a major sector, ensure the angle used represents the larger region rather than its smaller complementary sector.
Applications
Calculating the area of pie-shaped land plots.
Designing fans, gears, rotating components, and circular structures.
Determining the area covered by a rotating sprinkler or sweep.
Calculating portions of circular diagrams and charts.
Solving geometry and engineering design problems.
Connecting angular displacement with circular area.
Worked Example
A circular garden has a radius of 8 m. A sector is formed by a central angle of 135°. Calculate its area. Using the degree formula, A = (135°/360°) × π × 8². Simplifying, A = (3/8) × 64π = 24π m² ≈ 75.40 m². Therefore, the sector occupies approximately 75.40 square metres.
Common Misconceptions
Sector area is not the same as arc length; one measures area and the other measures curved distance.
The radian formula A = 1/2 r²θ requires θ to be measured in radians.
The degree formula must use the fraction θ/360°.
Area units must be squared, such as cm² or m².
A major sector requires the larger central angle, not automatically the smaller angle between the radii.
The formula A = 1/2 rs uses arc length, not chord length.
Practice Questions
Define a sector and distinguish it from an arc.
Find the area of a sector with radius 5 cm and central angle 72°.
Find the area of a sector with radius 10 m and angle π/3 radians.
A sector has radius 7 cm and arc length 14 cm. Find its area.
A circle has radius 9 cm. Find the area of a sector with central angle 240°.
Derive the radian sector-area formula from the fraction of the full circle.
Explain why sector area and arc length require different units.
Key Takeaway
A sector's area is determined by its radius and central angle. The formulas A = 1/2 r²θ for radians and A = (θ/360°)πr² for degrees connect angular measurement with the area of circular regions.
Prerequisites
Measuring Angles.
Radian Measure of Angles.
Conversion Between Degrees and Radians.
Arc Length and Central Angles.
Basic area and circle formulas.
Reference
OpenStax, Precalculus 2e, Radian Measure and Applications.
OpenStax, Algebra and Trigonometry 2e, Arc Length and Sector Area.
James Stewart, Calculus, applications of radian measure.
Related Topics
Arc Length and Central Angles
Radian Measure of Angles
Conversion Between Degrees and Radians
Rotation and Angular Displacement
Area of a Circle
Sources and verification
Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.
- Source verification pending; check an authoritative textbook, university, standards body, or peer-reviewed source.