A unit is an agreed standard used to express the magnitude of a physical quantity. Scientists and engineers require consistent units so that measurements and calculations can be compared and communicated internationally. The International System of Units, abbreviated SI, is the modern metric system used throughout most scientific and technical work. It is built on seven base units: metre for length, kilogram for mass, second for time, ampere for electric current, kelvin for thermodynamic temperature, mole for amount of substance, and candela for luminous intensity. Derived units are formed from combinations of these base units. Some derived units have special names, including newton, joule, watt, pascal, coulomb, and volt. SI also uses prefixes such as kilo, centi, milli, micro, and nano to express powers of ten. Other historical or specialized unit systems include the centimetre-gram-second (CGS) system and the foot-pound-second (FPS) system. Converting between units requires appropriate conversion factors and careful attention to powers, especially for area and volume.
SI Units and Unit Systems
The International System of Units (SI) is the internationally accepted measurement system based on seven base units, from which standardized units for other physical quantities are derived.
Explanation
Example or application
A distance of 3 kilometres is equivalent to 3,000 metres because the SI prefix kilo represents a factor of 1,000.
Definition
A unit system is an organized collection of standard units used to express physical quantities, while the SI system is the internationally recognized system based on seven defined base units.
Purpose
The purpose of standardized unit systems is to make measurements consistent, comparable, reproducible, and understandable across scientific disciplines, engineering applications, and countries.
Importance
Correct units are essential for meaningful measurements, valid calculations, scientific communication, engineering safety, and international cooperation.
SIBase Units
| Quantity | Unit Name | Symbol |
|---|---|---|
Length | metre | m |
Mass | kilogram | kg |
Time | second | s |
Electric current | ampere | A |
Thermodynamic temperature | kelvin | K |
Amount of substance | mole | mol |
Luminous intensity | candela | cd |
Common Derived Units
| Quantity | Unit Name | Symbol | Definition |
|---|---|---|---|
Force | newton | N | kg m/s^2 |
Energy | joule | J | N m |
Power | watt | W | J/s |
Pressure | pascal | Pa | N/m^2 |
Electric charge | coulomb | C | A s |
Potential difference | volt | V | W/A |
Frequency | hertz | Hz | s^-1 |
SIBase Prefixes
| Prefix | Symbol | Factor |
|---|---|---|
tera | T | 10^12 |
giga | G | 10^9 |
mega | M | 10^6 |
kilo | k | 10^3 |
centi | c | 10^-2 |
milli | m | 10^-3 |
micro | μ | 10^-6 |
nano | n | 10^-9 |
pico | p | 10^-12 |
Other Unit Systems
| System | Description |
|---|---|
CGS | The centimetre-gram-second system uses centimetre, gram, and second as its mechanical base units. |
FPS | The foot-pound-second system uses foot, pound, and second in certain engineering and historical contexts. |
Imperial and US customary units | These systems include units such as inch, foot, mile, pound, and gallon, with definitions and usage depending on the system. |
Unit Conversion Principles
A conversion factor is a ratio of equivalent quantities expressed in different units.
Multiplying by a correctly chosen conversion factor changes the numerical value without changing the physical quantity.
For area, conversion factors must be squared.
For volume, conversion factors must be cubed.
Unit symbols are case-sensitive and should not be pluralized.
Conversion Examples
| Conversion | Equivalent |
|---|---|
1 km | 1,000 m |
1 m | 100 cm |
1 h | 3,600 s |
1 L | 10^-3 m^3 |
Worked Example
Problem
Convert 72 km/h into metres per second.
Calculation
72 × (1,000 m / 3,600 s) = 20 m/s.
Result
72 km/h = 20 m/s.
Unit Writing Rules
Leave a space between the numerical value and the unit symbol, such as 25 m.
Do not add a plural ending to unit symbols.
Write unit symbols with their correct capitalization.
Use a negative exponent or a solidus for compound units, such as m/s or m s^-1.
Do not use a unit symbol as an abbreviation for the quantity itself.
Learning Objectives
Identify the seven SI base units.
Recognize common derived units.
Use SI prefixes and powers of ten.
Convert between common units.
Distinguish SI from other measurement systems.
Common Misconceptions
The kilogram is the SI base unit of mass, not the gram.
A change of unit does not change the physical quantity itself.
Area and volume conversions require squared and cubed conversion factors, respectively.
Kelvin is written without a degree symbol.
Key Takeaway
The SI system provides a common measurement language, and correct unit selection and conversion are essential for reliable physical calculations.
Related Topics
Physical Quantities
Fundamental and Derived Quantities
Dimensional Analysis
Significant Figures and Scientific Notation
Sources and verification
Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.