No physical measurement is perfectly exact. Instrument limitations, environmental conditions, experimental procedures, and natural variations introduce uncertainty into measured values. Accuracy refers to the closeness of a measured value to an accepted reference value. Precision describes the agreement among repeated measurements made under specified conditions. A set of measurements can be precise but inaccurate if a systematic effect shifts all results away from the reference value. It can also be relatively accurate on average while individual measurements show considerable variation. Measurement uncertainty quantifies the dispersion of values that could reasonably be attributed to the measured quantity. It may be evaluated using instrument specifications, calibration information, repeated observations, and statistical methods. Random effects cause unpredictable variation and can often be reduced through repeated measurements. Systematic effects produce consistent shifts and require identification, correction, or evaluation. Results should be reported with an appropriate value and uncertainty, such as (10.2 ± 0.1) cm, when the uncertainty is expressed in the same unit.
Accuracy, Precision and Uncertainty
Accuracy describes how close a measurement is to an accepted reference value, precision describes the consistency of repeated measurements, and uncertainty expresses the range of doubt associated with a measured result.
Explanation
Example or application
If the accepted length of an object is 10.0 cm, measurements of 10.0, 10.1, and 9.9 cm are close to the reference value. Measurements of 12.0, 12.1, and 12.0 cm are consistent with one another but not accurate relative to the accepted value.
Definition
Accuracy is the closeness of a measurement to an accepted reference value; precision is the degree of agreement among repeated measurements; uncertainty is a quantified indication of the doubt associated with a measurement result.
Purpose
These concepts help evaluate measurement quality, interpret experimental results, compare measurements, and communicate how reliably a physical quantity has been determined.
Importance
Understanding accuracy, precision, and uncertainty prevents misleading conclusions, improves experimental design, and allows scientific results to be compared meaningfully.
Accuracy And Precision
Accuracy
Meaning
Closeness to an accepted reference value.
Affected By
Systematic effects
Calibration errors
Instrument bias
Measurement procedure
Precision
Meaning
Closeness of repeated measurements to one another.
Affected By
Random variation
Instrument resolution
Environmental fluctuations
Measurement technique
Uncertainty
Meaning
A parameter describing the dispersion of values that could reasonably be attributed to the measured quantity.
Purpose
Communicates the reliability and limitations of the measurement.
Types Of Measurement Error
| Type | Description | Examples | Management |
|---|---|---|---|
Random error | An unpredictable variation that causes repeated measurements to differ. |
| Repeat measurements, calculate suitable averages, and use statistical analysis. |
Systematic error | A consistent effect that shifts measurements in a particular direction or follows a repeatable pattern. |
| Identify the source, calibrate instruments, improve the procedure, and apply justified corrections. |
Gross error | A major mistake caused by incorrect reading, recording, calculation, or procedure. |
| Check records and calculations, improve procedures, and repeat affected measurements where appropriate. |
Uncertainty Sources
Instrument resolution
Calibration information
Environmental conditions
Repeatability of the procedure
Human observation
Uncertainty in input quantities used in indirect measurements
Uncertainty Representation
Absolute Uncertainty
An uncertainty expressed in the same unit as the measured quantity.
Relative Uncertainty
The absolute uncertainty divided by the magnitude of the measured value.
Percentage Uncertainty
Relative uncertainty multiplied by 100 percent.
Reporting Example
A length may be reported as (10.2 ± 0.1) cm.
Important Relationships
Relative uncertainty = absolute uncertainty / measured value, for a nonzero measured value.
Percentage uncertainty = relative uncertainty × 100%.
For independent random uncertainties, statistical combination depends on the measurement model and the type of calculation.
Worked Example
Problem
A measured length is (20.0 ± 0.2) cm. Find its percentage uncertainty.
Calculation
Percentage uncertainty = (0.2 / 20.0) × 100% = 1%.
Result
The percentage uncertainty is 1%.
Measurement Reporting
Report the measured value with a suitable unit.
Include uncertainty when it is known and relevant.
Use a consistent decimal place for the value and absolute uncertainty.
Avoid reporting more digits than the measurement supports.
Explain important uncertainty sources when interpreting results.
Common Misconceptions
Precision and accuracy are not the same.
A large number of decimal places does not guarantee accuracy.
Repeated measurements do not automatically remove systematic effects.
Uncertainty is not necessarily the result of a mistake; it is an inherent part of measurement.
A measurement with uncertainty is still scientifically useful.
Learning Objectives
Distinguish accuracy from precision.
Explain the role of measurement uncertainty.
Identify random, systematic, and gross errors.
Calculate relative and percentage uncertainty in simple cases.
Report measurements using appropriate precision.
Key Takeaway
A reliable measurement requires more than a numerical result; its accuracy, precision, and uncertainty must also be understood.
Related Topics
Measurement and Experimental Methods
Significant Figures and Scientific Notation
Physical Quantities
Scientific Method in Physics
Sources and verification
Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.