✦ScienexySCIENCE KNOWLEDGE LIBRARY
topic · SCI-PHY-003-007

Fundamental and Derived Units of Motion

Kinematic quantities are expressed using SI units. Length and time are fundamental SI quantities, while speed, velocity, and acceleration are derived quantities formed from combinations of metres and seconds.

Explanation

Physical measurements require agreed units so that results can be communicated and compared consistently. In the International System of Units, length is measured in metres and time is measured in seconds. These are fundamental quantities relevant to elementary kinematics. Other motion-related quantities are derived from them through mathematical relationships. Speed and velocity have the unit metre per second, while acceleration has the unit metre per second squared. Area, when used in spatial descriptions, is measured in square metres, and volume is measured in cubic metres. Angular displacement is measured in radians, while angular velocity and angular acceleration are commonly expressed in radians per second and radians per second squared. The radian is dimensionless in the SI system because it is defined as the ratio of two lengths, although writing rad is useful to identify an angular quantity. Correct unit selection is essential when substituting values into equations and checking whether an answer is physically meaningful.

Example or application

If a runner travels 100 m in 20 s, the average speed is 100 m / 20 s = 5 m/s. The unit m/s is derived from the fundamental SI units of length and time.

Definition

A fundamental unit is a unit assigned to a base physical quantity in a measurement system, while a derived unit is formed by combining fundamental units according to a physical relationship.

Purpose

The purpose of studying fundamental and derived units is to express kinematic measurements consistently, convert between units correctly, and verify the physical validity of equations and numerical results.

Importance

Units make physical measurements meaningful and reproducible. Understanding how derived units are formed helps prevent calculation errors and provides a foundation for dimensional analysis and scientific measurement.

Si Base Units

QuantityUnit NameSymbolRole

Length

metre

m

Fundamental SI quantity.

Time

second

s

Fundamental SI quantity.

Mass

kilogram

kg

Fundamental SI quantity, important in dynamics but not required to define basic kinematic quantities.

Derived Units

QuantityUnitSymbolRelationship

Area

square metre

m²

length × length

Volume

cubic metre

m³

length × length × length

Speed

metre per second

m/s

distance / time

Velocity

metre per second

m/s

displacement / time

Acceleration

metre per second squared

m/s²

velocity / time

Frequency

hertz

Hz

s⁻¹

Angular velocity

radian per second

rad/s

angular displacement / time

Angular acceleration

radian per second squared

rad/s²

angular velocity / time

Unit Conversions

ConversionEquivalent

1 kilometre

1000 metres

1 hour

3600 seconds

1 kilometre per hour

5/18 metres per second

1 metre per second

3.6 kilometres per hour

1 revolution

2π radians

Scientific Principles

  • A physical quantity is expressed as a numerical value multiplied by a unit.

  • Derived units follow from the definitions of physical quantities.

  • The SI system provides internationally agreed units.

  • Unit conversions must preserve the physical quantity being measured.

  • Radians are dimensionless in SI but are retained in expressions to identify angular quantities.

Dimensional Forms

QuantityDimension

Position or displacement

L

Time

T

Speed or velocity

LT⁻¹

Acceleration

LT⁻²

Frequency

T⁻¹

Angular velocity

T⁻¹

Angular acceleration

T⁻²

Worked Example

Problem

Convert a speed of 72 km/h into metres per second.

Steps

  • Use 1 km = 1000 m.

  • Use 1 h = 3600 s.

  • 72 km/h = 72 × 1000 / 3600 m/s.

  • 72 km/h = 20 m/s.

Answer

72 km/h is equal to 20 m/s.

Common Misconceptions

  • The kilogram is a fundamental SI unit, but mass is not needed to define basic speed or acceleration.

  • Speed and velocity have the same SI unit but different physical meanings.

  • Acceleration is measured in m/s², not m/s.

  • The radian is dimensionless in SI, but it is useful to state it for angular quantities.

  • A unit conversion changes the numerical representation, not the physical quantity itself.

Learning Objectives

  • Identify the relevant fundamental SI units.

  • Explain how derived units are formed.

  • Write the SI units of common kinematic quantities.

  • Convert between common units of speed.

  • Recognize the dimensional forms of motion quantities.

Prerequisites

  • Physical quantities

  • Measurement

  • Basic arithmetic

  • Fractions and ratios

  • Scientific notation

Key Takeaway

Length and time provide the fundamental SI units needed for basic kinematics. Speed, velocity, and acceleration are derived quantities whose units follow directly from their definitions.

Related Topics

  • SCI-PHY-003-006

  • SCI-PHY-003-008

  • SCI-PHY-003-009

  • SCI-PHY-003-014

Sources and verification

Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.

Suggest a correction or source · More in Kinematics