✦ScienexySCIENCE KNOWLEDGE LIBRARY
topic · SCI-PHY-009-006

Differences Between Solids and Fluids

Solids and fluids respond differently to applied forces. An ordinary solid can resist a sustained shear stress by maintaining a finite deformation, whereas a fluid continues to deform and flow under sustained shear stress.

Explanation

The mechanical distinction between solids and fluids is based on how they respond to shear stress. A solid can generally develop an internal shear stress that balances an applied shear load while maintaining a finite deformation. Within its elastic range, the deformation of an elastic solid is related to the applied stress. A fluid, however, cannot remain in static equilibrium under a nonzero shear stress in the same way; it continues to deform as long as the shear stress is maintained. This behavior is associated with flow and viscosity. Solids often have a definite shape and can support shear loads, while fluids take the shape of their containers. The distinction can become complex for materials such as gels, soft polymers, asphalt, and pastes, which may display both solid-like and fluid-like behavior depending on the duration and magnitude of the applied force.

Example or application

A metal block can maintain a sheared shape while supporting a static tangential load within its elastic or plastic response, whereas a layer of water subjected to a sustained tangential force continues to flow.

Definition

A solid is a material that can resist a sustained shear stress through a finite deformation, whereas a fluid continuously deforms under a sustained nonzero shear stress.

Purpose

This comparison establishes the mechanical basis for classifying materials and explains why different laws are used to study solids and fluids.

Importance

Understanding the difference is essential in structural engineering, materials science, hydraulic engineering, and the analysis of systems in which solids and fluids interact.

Comparison

PropertySolidFluid

Response to sustained shear stress

Can maintain a finite deformation while supporting shear stress.

Continues to deform while nonzero shear stress is maintained.

Shape

Ordinarily maintains its own shape.

Takes the shape of its container.

Mechanical resistance

Can support shear stress in static equilibrium.

At rest in ordinary hydrostatic equilibrium, shear stress is zero.

Deformation

May be elastic, plastic, or otherwise time-dependent.

Produces flow under sustained shear stress.

Examples

Steel, glass, wood, and many rigid polymers.

Water, air, oil, and many liquid mixtures.

Shear Stress

Equation

τ = F_t/A

Description

Shear stress is tangential force per unit area.

Si Unit

pascal (Pa)

Solid Elastic Response

Description

For a simple linearly elastic material under small shear deformation, shear stress is proportional to shear strain.

Equation

τ = Gγ

Variables

Τ

Shear stress.

G

Shear modulus.

Γ

Shear strain.

Fluid Viscous Response

Description

For a Newtonian fluid in simple shear, shear stress is proportional to the velocity gradient.

Equation

τ = μ(du/dy)

Variables

Τ

Shear stress.

Μ

Dynamic viscosity.

Du/dy

Velocity gradient perpendicular to the flow direction.

Complex Material Behavior

MaterialBehavior

Gel

May show elastic response at short times and flow-like behavior over longer times.

Toothpaste

Often behaves as a yield-stress material: it can resist small stresses and flow when sufficient stress is applied.

Soft polymer

May show viscoelastic behavior, combining elastic and viscous responses.

Learning Objectives

  • Explain the mechanical distinction between solids and fluids.

  • Define shear stress and describe its role in material deformation.

  • Compare the elastic response of solids with the viscous response of fluids.

  • Recognize that some materials have intermediate or time-dependent behavior.

Common Misconceptions

  • A solid is not necessarily perfectly rigid; solids can deform under force.

  • A fluid does not need to flow rapidly to be classified as a fluid.

  • Not all complex materials fit a simple solid-versus-fluid classification at every time scale.

  • The distinction is based on mechanical response, not simply on whether a material appears hard or soft.

Key Takeaway

The central difference is that an ordinary solid can sustain static shear stress, while a fluid continuously deforms under sustained shear stress.

Related Topics

  • SCI-PHY-009-004

  • SCI-PHY-009-005

  • SCI-PHY-009-014

  • SCI-PHY-009-016

Sources and verification

Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.

Suggest a correction or source · More in Fluid Mechanics