Compressibility describes how a fluid's volume or density responds to changes in pressure. In compressible-flow analysis, density variations are included in the governing equations. This is particularly important in high-speed gas flows, gas pipelines, compressors, nozzles, and atmospheric systems. An incompressible-flow model assumes constant density for the fluid being analyzed. This approximation is often suitable for liquids under ordinary engineering conditions and may also be suitable for some gas flows when density changes are sufficiently small. Whether a gas can be treated as incompressible depends on the flow conditions, not simply on its state of matter. For many gas flows, the Mach number provides a useful first indication of compressibility effects, although the acceptable threshold depends on the required accuracy and the specific flow. Temperature changes can also affect density, and a flow may require compressible treatment even when its speed is not especially high if thermal or pressure changes are substantial.
Compressible and Incompressible Fluids
Compressible fluids undergo meaningful density changes when pressure or temperature changes, while incompressible-fluid models assume that density remains constant. Gases are often compressible, whereas liquids are frequently approximated as incompressible under ordinary conditions.
Explanation
Example or application
Air accelerating through a high-speed nozzle may experience significant density changes and require compressible-flow analysis. Water moving slowly through an ordinary water-supply pipe is often modeled as incompressible.
Definition
A compressible fluid model allows density to vary significantly with pressure, temperature, or other flow conditions, whereas an incompressible-fluid model assumes density remains constant.
Purpose
The distinction determines whether density changes must be included when modeling fluid motion and calculating pressure, velocity, and mass flow.
Importance
Correctly identifying compressibility is essential for designing gas turbines, compressors, nozzles, aircraft, pipelines, hydraulic systems, and other equipment where density variation affects performance and safety.
Compressibility Concept
Description
A measure of the volume response of a substance to a change in pressure.
Isothermal Compressibility
Equation
β_T = -(1/V)(∂V/∂p)_T
Description
Measures fractional volume change per unit pressure change at constant temperature.
Bulk Modulus
Equation
K = 1/β
Description
For the corresponding compressibility definition, bulk modulus measures resistance to volume change.
Comparison
| Aspect | Compressible Model | Incompressible Model |
|---|---|---|
Density | Allows density to change. | Assumes density remains constant. |
Typical examples | High-speed gas flow and strongly compressed gases. | Many ordinary liquid-flow problems. |
Equations | Density variation is included in mass, momentum, and energy equations. | Constant density simplifies the governing equations. |
Important effects | Pressure-density coupling, temperature changes, and acoustic effects. | Pressure and velocity changes with density treated as constant. |
Mach Number
Equation
Ma = v/a
Description
The Mach number is the ratio of flow speed to the local speed of sound.
Variables
Ma
Mach number.
V
Characteristic flow speed.
A
Local speed of sound in the fluid.
Interpretation
For many gas-flow applications, compressibility effects become increasingly important as Mach number rises. Low Mach number alone does not guarantee incompressibility if large thermal or pressure-induced density changes occur.
Continuity Equations
| Name | Equation | Description |
|---|---|---|
General mass conservation | ∂ρ/∂t + ∇·(ρu) = 0 | Differential form of mass conservation for a continuum fluid. |
Steady one-dimensional flow | ρ₁A₁v₁ = ρ₂A₂v₂ | Mass flow rate is constant between sections when there is no mass accumulation or leakage. |
Incompressible steady flow | A₁v₁ = A₂v₂ | Follows from mass conservation when density is constant and the velocity is suitably represented by its average normal value. |
Typical Applications
Compressible Flow
Gas turbines
Compressors
Supersonic nozzles
High-speed aircraft
Gas pipelines
Incompressible Approximation
Water distribution
Hydraulic machinery
Many liquid pipelines
Low-speed liquid flow
Learning Objectives
Define compressible and incompressible fluid models.
Explain why gases are often treated as compressible and liquids often as incompressible.
Describe the role of the Mach number.
Apply the appropriate continuity relationship under stated assumptions.
Common Misconceptions
All gases are not automatically compressible in every simplified calculation; some gas flows can be approximated as incompressible.
Liquids are not perfectly incompressible; their density can change under sufficiently large pressure or temperature changes.
The Mach number is useful but does not replace checking thermal and pressure-induced density changes.
Incompressible flow means constant density in the model, not zero fluid velocity.
Key Takeaway
Compressibility is about density variation, and the correct model depends on the actual pressure, temperature, and flow conditions rather than simply whether the fluid is a liquid or gas.
Related Topics
SCI-PHY-009-005
SCI-PHY-009-007
SCI-PHY-009-014
SCI-PHY-009-017
SCI-PHY-009-019
Sources and verification
Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.