✦ScienexySCIENCE KNOWLEDGE LIBRARY
topic · SCI-PHY-009-016

Newtonian and Non-Newtonian Fluids

Newtonian fluids have a linear relationship between shear stress and shear rate under specified conditions, while non-Newtonian fluids do not follow this simple proportional relationship. Their viscosity may depend on shear rate, time, or the stress history of the material.

Explanation

Viscosity describes a fluid's resistance to shear deformation. In a Newtonian fluid, shear stress is proportional to the velocity gradient for simple shear, and the dynamic viscosity is independent of shear rate at a fixed temperature and pressure. Water and many simple gases behave approximately as Newtonian fluids under ordinary conditions. Non-Newtonian fluids have a more complex relationship between shear stress and shear rate. Some become less viscous as shear rate increases, a behavior called shear thinning; others become more viscous, called shear thickening. Some materials require a minimum stress before they begin to flow, which is associated with yield-stress behavior. Time-dependent non-Newtonian materials may change their apparent viscosity as they are sheared over time. The classification depends on the material, temperature, pressure, and range of shear conditions, so a fluid should not be assigned a model solely from its everyday name.

Example or application

Water behaves approximately as a Newtonian fluid under ordinary conditions. Ketchup often exhibits shear-thinning behavior, becoming easier to pour when it is shaken or squeezed.

Definition

A Newtonian fluid obeys a linear shear-stress versus shear-rate relationship with constant dynamic viscosity at fixed conditions, whereas a non-Newtonian fluid does not follow that simple relationship.

Purpose

The classification helps select suitable constitutive equations for predicting flow resistance, pressure losses, mixing behavior, and material transport.

Importance

It is important in food processing, medicine, cosmetics, polymer production, lubrication, paints, drilling fluids, and many industrial systems where viscosity changes with flow conditions.

Newtonian Fluids

Behavior

Shear stress is directly proportional to shear rate in simple shear.

Equation

τ = μγ̇

Variables

Τ

Shear stress in pascals.

Μ

Dynamic viscosity in pascal-seconds.

Γ̇

Shear rate in reciprocal seconds.

Examples

  • Water under ordinary conditions

  • Many simple gases

  • Many low-molecular-weight liquids under suitable conditions

Non Newtonian Fluid Types

TypeDescriptionExamples

Shear-thinning

Apparent viscosity decreases as shear rate increases.

  • Many polymer solutions

  • Many paints

  • Ketchup

Shear-thickening

Apparent viscosity increases as shear rate increases.

  • Concentrated cornstarch suspensions under suitable conditions

  • Some dense particle suspensions

Yield-stress

The material behaves as though a threshold stress is needed before sustained flow begins.

  • Toothpaste

  • Some muds

  • Some concentrated suspensions

Thixotropic

At a fixed shear condition, apparent viscosity or structure decreases with time under continued shearing and may recover during rest.

  • Some gels

  • Some paints

  • Some structured suspensions

Rheopectic

The material's apparent viscosity or structure increases with time under continued shearing in the relevant conditions.

  • Certain specialized suspensions and pastes

Viscoelastic

The material exhibits both viscous flow and elastic response.

  • Many polymer melts

  • Some polymer solutions

Comparison

AspectNewtonianNon Newtonian

Shear-stress relationship

Linear with shear rate in simple shear.

Generally nonlinear or dependent on time or deformation history.

Dynamic viscosity

Constant at fixed temperature and pressure.

May vary with shear rate, time, or material history.

Mathematical model

Newton's law of viscosity.

May require power-law, Bingham, Herschel-Bulkley, viscoelastic, or other constitutive models.

Common Constitutive Models

ModelEquationDescription

Power-law model

τ = K(γ̇)^n

A common empirical model for some generalized Newtonian fluids. n less than 1 represents shear thinning, n greater than 1 represents shear thickening, and n equal to 1 gives a linear relationship.

Bingham plastic model

τ = τ_y + μ_pγ̇

For yielded simple-shear behavior, τ_y is the yield stress and μ_p is the plastic viscosity; the model also requires a no-flow condition below the yield stress.

Measurement Methods

  • Rotational viscometry

  • Capillary viscometry

  • Rheometry

  • Controlled-stress testing

  • Controlled-shear-rate testing

Factors Affecting Viscosity

  • Temperature

  • Pressure

  • Shear rate

  • Molecular structure

  • Particle concentration

  • Time under shear

  • Material preparation and history

Learning Objectives

  • Define Newtonian and non-Newtonian fluids.

  • Explain the relationship between shear stress and shear rate.

  • Distinguish shear thinning from shear thickening.

  • Recognize yield-stress and time-dependent fluid behavior.

  • Identify common applications of rheology.

Common Misconceptions

  • A fluid is not Newtonian simply because it flows easily.

  • Non-Newtonian fluids do not all behave in the same way.

  • Shear thinning means apparent viscosity decreases as shear rate increases; it does not mean viscosity must decrease with time in every circumstance.

  • Temperature can affect Newtonian viscosity even though viscosity is independent of shear rate at fixed temperature and pressure.

Key Takeaway

Newtonian fluids have a simple proportional relationship between shear stress and shear rate, while non-Newtonian fluids require more complex descriptions of their flow behavior.

Related Topics

  • SCI-PHY-009-004

  • SCI-PHY-009-006

  • SCI-PHY-009-014

  • SCI-PHY-009-017

  • SCI-PHY-009-019

Sources and verification

Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.

Suggest a correction or source · More in Fluid Mechanics