✦ScienexySCIENCE KNOWLEDGE LIBRARY
topic · SCI-PHY-009-018

SI Units Used in Fluid Mechanics

Fluid mechanics uses the International System of Units (SI) to express physical quantities consistently. Common units include the kilogram for mass, metre for length, second for time, pascal for pressure, and pascal-second for dynamic viscosity.

Explanation

The International System of Units provides a standard framework for measurements in science and engineering. In fluid mechanics, length is measured in metres, mass in kilograms, time in seconds, and thermodynamic temperature in kelvins. Derived units are formed from these base units. Force is measured in newtons, pressure in pascals, density in kilograms per cubic metre, velocity in metres per second, and volume flow rate in cubic metres per second. Dynamic viscosity is measured in pascal-seconds, while kinematic viscosity is measured in square metres per second. Using coherent SI units prevents conversion errors and makes dimensional checks possible. Prefixes such as kilo-, milli-, and micro- are used to represent large and small quantities. Absolute pressure and gauge pressure must also be distinguished: both are expressed in pascals, but they use different reference levels.

Example or application

If water has a density of 1000 kg/m³ and flows through a pipe at an average speed of 2 m/s with cross-sectional area 0.01 m², the mass flow rate is 20 kg/s.

Definition

SI units in fluid mechanics are standardized units from the International System of Units used to express fluid properties, forces, motion, and energy.

Purpose

Their purpose is to ensure that measurements and calculations are consistent, comparable, and internationally understandable.

Importance

Consistent units are essential for reliable engineering calculations, experimental reporting, equipment specifications, and communication between scientific and engineering teams.

Si Base Units

QuantitySymbolUnit Name

Length

m

metre

Mass

kg

kilogram

Time

s

second

Thermodynamic temperature

K

kelvin

Electric current

A

ampere

Amount of substance

mol

mole

Luminous intensity

cd

candela

Common Derived Units

QuantityUnitEquivalent Base Units

Area

m²

m²

Volume

m³

m³

Velocity

m/s

m·s⁻¹

Acceleration

m/s²

m·s⁻²

Force

N

kg·m·s⁻²

Pressure

Pa

kg·m⁻¹·s⁻²

Density

kg/m³

kg·m⁻³

Dynamic viscosity

Pa·s

kg·m⁻¹·s⁻¹

Kinematic viscosity

m²/s

m²·s⁻¹

Volume flow rate

m³/s

m³·s⁻¹

Mass flow rate

kg/s

kg·s⁻¹

Surface tension

N/m

kg·s⁻²

Specific weight

N/m³

kg·m⁻²·s⁻²

Unit Conversions

ConversionEquivalent

1 kPa

1000 Pa

1 MPa

1000000 Pa

1 L

0.001 m³

1 mL

0.000001 m³

1 cP

0.001 Pa·s

1 cSt

0.000001 m²/s

Pressure References

Absolute Pressure

Pressure measured relative to a perfect vacuum.

Gauge Pressure

Pressure measured relative to the local atmospheric pressure.

Relationship

p_absolute = p_gauge + p_atmospheric

Note

The relationship assumes the gauge pressure is defined relative to the atmospheric pressure at the measurement location.

Prefixes

PrefixSymbolFactor

kilo

k

10³

mega

M

10⁶

milli

m

10⁻³

micro

μ

10⁻⁶

Worked Example

Problem

A fluid with density 1000 kg/m³ flows through a cross-section of area 0.01 m² at an average normal speed of 2 m/s. Find the mass flow rate.

Equation

ṁ = ρAv

Substitution

ṁ = 1000 × 0.01 × 2

Result

ṁ = 20 kg/s

Explanation

The units combine as (kg/m³)(m²)(m/s), giving kg/s.

Learning Objectives

  • Identify SI base units used in fluid mechanics.

  • Recognize the SI units of pressure, density, viscosity, and flow rate.

  • Convert common pressure and volume units into SI units.

  • Distinguish absolute pressure from gauge pressure.

Common Misconceptions

  • The SI unit of pressure is the pascal, not the newton.

  • Dynamic viscosity is measured in Pa·s, while kinematic viscosity is measured in m²/s.

  • Litres are commonly used in practice, but the SI derived unit of volume is the cubic metre.

  • Gauge pressure and absolute pressure use different reference levels even though both are measured in pascals.

Key Takeaway

Using coherent SI units is essential for accurate fluid calculations, meaningful comparisons, and reliable engineering communication.

Related Topics

  • SCI-PHY-009-017

  • SCI-PHY-009-019

  • SCI-PHY-009-020

Sources and verification

Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.

Suggest a correction or source · More in Fluid Mechanics