✦ScienexySCIENCE KNOWLEDGE LIBRARY
topic · SCI-PHY-016-014

Electrical Resistance

Electrical resistance is a measure of how strongly a component opposes electric current. It depends on the material, dimensions, temperature, and physical conditions of the component.

Explanation

When an electric field is applied to a conductor, charge carriers drift through the material and interact with its atomic structure, impurities, and other scattering mechanisms. These interactions contribute to electrical resistance. For an ohmic conductor under constant physical conditions, resistance is the ratio of potential difference across the conductor to current through it. Resistance is measured in ohms, symbol Ω. The resistance of a uniform conductor depends on its length, cross-sectional area, and material resistivity. Increasing the length generally increases resistance, while increasing the cross-sectional area generally decreases it. Temperature also affects resistance, with many metals showing increased resistance as temperature rises. Some materials, such as semiconductors and thermistors, can have more complicated temperature-dependent behavior.

Example or application

A 6 Ω resistor connected across a 12 V ideal voltage source carries a current of 2 A under steady-state ohmic conditions.

Definition

Electrical resistance is the property of a component that opposes electric current and determines the relationship between voltage and current.

Purpose

Resistance helps describe and control current, voltage distribution, and electrical power in circuits.

Importance

Resistance is essential in circuit design, current limiting, voltage division, heating devices, sensors, and electrical protection systems.

Ohms Law

Equation

R = V / I

Description

For an ohmic component, resistance equals the potential difference divided by current.

Resistance Of Uniform Conductor

Equation

R = ρ L / A

Description

For a uniform conductor, resistance equals resistivity multiplied by length and divided by cross-sectional area.

Variables

R

Resistance in ohms

Ρ

Electrical resistivity in ohm-metres

L

Length in metres

A

Cross-sectional area in square metres

Si Unit

Name

ohm

Symbol

Ω

Equivalence

1 Ω = 1 V/A

Factors Affecting Resistance

FactorEffect

Length

For a uniform conductor, greater length generally produces greater resistance.

Cross-sectional area

A larger cross-sectional area generally produces lower resistance.

Material

Different materials have different electrical resistivities.

Temperature

Resistance changes with temperature, and the relationship depends on the material.

Types Of Resistance Behavior

TypeDescription

Ohmic

Voltage and current are proportional under specified constant physical conditions.

Non-ohmic

The voltage-current relationship is not a straight-line proportional relationship under the conditions considered.

Temperature Dependence

Approximate Metal Equation

R = R0 [1 + α(T - T0)]

Description

This approximation describes the resistance of many metals over a moderate temperature range.

Limitation

It is not a universal temperature law for all materials or large temperature intervals.

Resistors In Circuits

ConnectionEquationDescription

Series

R_total = R1 + R2 + ... + Rn

The equivalent resistance is the sum of the individual resistances.

Parallel

1/R_total = 1/R1 + 1/R2 + ... + 1/Rn

The reciprocal of the equivalent resistance is the sum of the individual reciprocals.

Worked Example

Problem

A resistor has 10 V across it and carries a current of 2 A. Find its resistance.

Calculation

R = V / I = 10 V / 2 A

Answer

5 Ω

Related Concepts

  • Resistivity is a material property.

  • Resistance is a property of a particular conductor or component with specific dimensions.

  • Conductance is the reciprocal of resistance.

  • Electrical power in a resistor is converted mainly into thermal energy.

Learning Objectives

  • Define electrical resistance.

  • Calculate resistance using voltage and current.

  • Explain the factors that affect conductor resistance.

  • Distinguish resistance from resistivity.

  • Compare series and parallel resistance combinations.

Common Misconceptions

  • Resistance and resistivity are not the same quantity.

  • A resistor does not consume electric charge; it transfers electrical energy into other forms.

  • Resistance is not always constant; temperature and operating conditions can change it.

  • Ohm's law is not a universal proportionality for every electrical component.

Key Takeaway

Resistance describes opposition to current. It depends on the component's material, dimensions, temperature, and electrical behavior.

Related Topics

  • SCI-PHY-016-006

  • SCI-PHY-016-013

  • SCI-PHY-016-015

  • SCI-PHY-016-016

Sources and verification

Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.

Suggest a correction or source · More in Electricity & Circuits