Electrical conductance describes the ability of a component to conduct electric current. For a component with a defined resistance, conductance is the reciprocal of resistance. A high conductance indicates that a component allows current to flow more easily for a given voltage, while a low conductance indicates greater opposition to current. Conductance is measured in siemens, symbol S. The conductance of a uniform conductor depends on its material, length, and cross-sectional area. Conductance is related to conductivity, which is an intrinsic material property. For a uniform conductor, conductance increases with cross-sectional area and material conductivity and decreases with length.
Electrical Conductance
Electrical conductance measures how easily electric current flows through a component. It is the reciprocal of resistance and is measured in siemens.
Explanation
Example or application
A resistor with a resistance of 5 Ω has a conductance of 0.2 S.
Definition
Electrical conductance is a measure of how easily electric current passes through a component and is defined as the reciprocal of resistance.
Purpose
Conductance provides an alternative way to describe electrical behavior, especially when analyzing parallel circuits and material conductivity.
Importance
Conductance is useful in circuit analysis, electrical measurements, material science, sensor design, and the study of conducting liquids and solids.
Fundamental Equation
Equation
G = 1 / R
Description
Conductance equals the reciprocal of resistance.
Ohms Law In Conductance Form
Equation
I = G V
Description
For an ohmic component, current equals conductance multiplied by voltage.
Si Unit
Name
siemens
Symbol
S
Equivalence
1 S = 1 A/V = 1/Ω
Conductance And Conductivity
| Quantity | Symbol | Description | Si Unit |
|---|---|---|---|
Conductance | G | A property of a component or specified conductor. | siemens (S) |
Electrical conductivity | σ | An intrinsic material property describing how well a material conducts electricity. | siemens per metre (S/m) |
Uniform Conductor Relationship
Equation
G = σ A / L
Description
For a uniform conductor, conductance is conductivity multiplied by cross-sectional area and divided by length.
Relationship With Resistance
Increasing resistance decreases conductance.
Decreasing resistance increases conductance.
Conductance and resistance are reciprocals for the same component under the same conditions.
The relationship is useful for analyzing parallel circuits.
Worked Example
Problem
A component has a resistance of 20 Ω. Calculate its conductance.
Calculation
G = 1 / 20 Ω
Answer
0.05 S
Applications
Comparing the conducting ability of electrical components
Analyzing parallel electrical networks
Measuring the electrical properties of materials
Studying electrolyte solutions
Characterizing sensors and electronic components
Learning Objectives
Define electrical conductance.
Explain its relationship with resistance.
Use the siemens as a unit of conductance.
Distinguish conductance from conductivity.
Calculate conductance from resistance.
Common Misconceptions
Conductance and conductivity are different physical quantities.
Siemens is the unit of conductance, not resistance.
A high conductance means low resistance for the same component and conditions.
Conductance depends on the dimensions of a component, whereas conductivity is a material property.
Key Takeaway
Conductance is the reciprocal of resistance and describes how easily a component allows current to flow.
Related Topics
SCI-PHY-016-014
SCI-PHY-016-016
SCI-PHY-016-019
Sources and verification
Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.
Suggest a correction or source · More in Electricity & Circuits