✦ScienexySCIENCE KNOWLEDGE LIBRARY
topic · SCI-PHY-016-016

Conductors, Insulators and Semiconductors

Conductors, insulators, and semiconductors are materials classified by their ability to conduct electric current. Their electrical behavior depends on available charge carriers, energy-band structure, temperature, impurities, and applied electric fields.

Explanation

Materials differ in their ability to conduct electric current. Conductors contain mobile charge carriers that can move through the material relatively easily. Metals such as copper and aluminium are common conductors because they have mobile conduction electrons. Insulators have very few mobile charge carriers under ordinary conditions and strongly resist current flow. Examples include glass, rubber, and many plastics. Semiconductors have electrical properties between those of typical conductors and insulators, and their conductivity can be controlled by temperature, light, and the addition of carefully selected impurities. Silicon and germanium are important semiconductor materials. In the energy-band model, conductors have available electronic states that permit current flow, insulators have a large energy gap between filled and available bands, and semiconductors generally have a smaller band gap.

Example or application

Copper wires carry current in household circuits, plastic insulation helps prevent accidental contact with the conducting metal, and silicon is used in electronic components such as transistors and integrated circuits.

Definition

Conductors, insulators, and semiconductors are categories of materials distinguished by their ability to support electric current under specified conditions.

Purpose

This classification helps explain how materials are selected and used in electrical wiring, insulation, electronic devices, sensors, and integrated circuits.

Importance

Modern electrical and electronic systems depend on conductors to carry current, insulators to prevent unwanted current paths, and semiconductors to control and process electrical signals.

Material Classification

TypeDescriptionExamplesCommon Applications

Conductors

Materials with relatively high electrical conductivity because they contain mobile charge carriers.

  • Copper

  • Aluminium

  • Silver

  • Graphite

  • Electrical wires

  • Contacts

  • Power transmission

Insulators

Materials with very low electrical conductivity under ordinary operating conditions.

  • Rubber

  • Glass

  • Porcelain

  • Many plastics

  • Cable insulation

  • Electrical supports

  • Protective housings

Semiconductors

Materials whose conductivity can be controlled through doping, temperature, illumination, and applied electric fields.

  • Silicon

  • Germanium

  • Gallium arsenide

  • Diodes

  • Transistors

  • Solar cells

  • Integrated circuits

Charge Carriers

MaterialCarriersDescription

Metal

Conduction electrons

Mobile electrons carry most of the current.

Intrinsic semiconductor

Electrons and holes

Thermal energy can generate electron-hole pairs.

Doped semiconductor

Majority and minority carriers

Dopants change the relative concentrations of electrons and holes.

Insulator

Very few mobile carriers under ordinary conditions

A large energy gap makes carrier generation difficult.

Energy Band Explanation

Material TypeBand Behavior

Conductors

The conduction band may be partially filled or overlap with the valence band, allowing mobile carriers.

Semiconductors

A relatively small band gap allows carriers to be generated by thermal energy, light, or doping.

Insulators

A relatively large band gap makes it difficult to produce mobile charge carriers.

Semiconductor Types

TypeDescription

Intrinsic semiconductor

A relatively pure semiconductor in which electron and hole concentrations are generated intrinsically.

N-type semiconductor

A doped semiconductor in which electrons are the majority carriers.

P-type semiconductor

A doped semiconductor in which holes are the majority carriers.

Factors Affecting Conductivity

  • Material composition

  • Temperature

  • Impurity concentration

  • Crystal structure and defects

  • Illumination in photosensitive materials

  • Electric-field strength and operating conditions

Conductivity And Resistivity

Equation

σ = 1 / ρ

Description

For a material in the usual isotropic linear-conduction model, conductivity is the reciprocal of resistivity.

Units

Conductivity

S/m

Resistivity

Ω·m

Applications

MaterialApplication

Copper

Electrical wiring and circuit connections.

Rubber

Insulation and protective electrical equipment.

Silicon

Integrated circuits, transistors, and solar cells.

Learning Objectives

  • Classify materials as conductors, insulators, or semiconductors.

  • Explain the role of mobile charge carriers.

  • Describe the energy-band explanation of conductivity.

  • Distinguish intrinsic and doped semiconductors.

  • Identify common applications of each material class.

Common Misconceptions

  • Insulators are not absolutely incapable of conducting under all conditions; sufficiently strong electric fields or special conditions can cause conduction or breakdown.

  • Semiconductors are not simply weak conductors; their conductivity can be deliberately controlled.

  • A material's conductivity depends on temperature and other operating conditions.

  • A semiconductor's holes represent effective positive charge carriers, not separate positively charged elementary particles.

Key Takeaway

Conductors allow current to flow easily, insulators strongly restrict current, and semiconductors provide controllable electrical behavior essential to modern electronics.

Related Topics

  • SCI-PHY-016-003

  • SCI-PHY-016-014

  • SCI-PHY-016-015

  • SCI-PHY-016-019

Sources and verification

Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.

Suggest a correction or source · More in Electricity & Circuits