✦ScienexySCIENCE KNOWLEDGE LIBRARY
topic · SCI-PHY-017-018

Magnetic Flux

Magnetic flux measures the amount of magnetic field passing through a specified surface. It depends on the magnetic field strength, the surface area, and the angle between the field and the surface's normal direction.

Explanation

Magnetic flux is a scalar quantity that measures the net magnetic field passing through a surface. It is represented by the symbol ΦB and measured in webers (Wb). For a uniform magnetic field passing through a flat surface, magnetic flux is given by ΦB = BA cos(theta), where B is the magnetic flux density, A is the surface area, and theta is the angle between the magnetic field and the normal to the surface. The area vector is perpendicular to the surface, not parallel to it. If the magnetic field is perpendicular to the surface, theta is zero and the flux magnitude is maximum. If the field is parallel to the surface, theta is 90 degrees and the flux is zero. For a non-uniform field or a curved surface, magnetic flux is calculated by integrating the normal component of B over the surface. Magnetic flux is central to Faraday's law of electromagnetic induction, which states that a changing magnetic flux through a circuit induces an electromotive force.

Example or application

A flat coil placed perpendicular to a uniform magnetic field has maximum magnetic flux through its area when the field is aligned with the surface normal.

Definition

Magnetic flux is the surface integral of the magnetic flux density through a specified surface and represents the net magnetic field passing through that surface.

Purpose

Magnetic flux provides a quantitative measure of how much magnetic field passes through a surface and helps describe electromagnetic induction.

Importance

Magnetic flux is fundamental to the operation of electric generators, transformers, inductors, and many electromagnetic sensors.

Symbol And Unit

Symbol

ΦB

Si Unit

weber (Wb)

Equivalent Unit

1 Wb = 1 T m²

Quantity Type

Scalar

Formula For Uniform Field

Equation

ΦB = B A cos(theta)

Variables

SymbolMeaningUnit

ΦB

Magnetic flux

weber (Wb)

B

Magnetic flux density

tesla (T)

A

Surface area

square metre (m²)

theta

Angle between B and the surface normal

degree or radian

Conditions

This formula applies to a flat surface in a uniform magnetic field.

General Integral Form

ΦB = ∫ B · dA

Area Vector

The area vector dA points perpendicular to the surface. The angle in the flux formula is measured between the magnetic field and this normal direction.

Angular Cases

AngleOrientationFlux

0°

Magnetic field perpendicular to the surface and parallel to its normal.

Maximum positive flux, ΦB = BA.

90°

Magnetic field parallel to the surface.

Zero flux, ΦB = 0.

180°

Magnetic field perpendicular to the surface but opposite to the chosen normal.

Maximum magnitude with negative sign, ΦB = -BA.

Worked Example

Problem

A flat surface of area 0.20 m² is placed in a uniform magnetic field of 0.50 T. The field makes an angle of 60° with the surface normal. Calculate the magnetic flux.

Given

B

0.50 T

A

0.20 m²

Theta

60°

Calculation

ΦB = BA cos(theta) = 0.50 × 0.20 × cos(60°) = 0.10 × 0.5

Answer

0.05 Wb

Explanation

The magnetic flux is 0.05 Wb because cos(60°) equals 0.5.

Relationship With Faradays Law

Faraday's law states that a changing magnetic flux through a circuit induces an electromotive force. For a coil with N turns, the induced emf is ε = -N dΦB/dt. The negative sign represents Lenz's law.

Ways To Change Magnetic Flux

  • Change the magnetic field strength.

  • Change the surface area.

  • Rotate the surface relative to the magnetic field.

  • Move the surface into or out of a region with a different magnetic field.

  • Change the magnetic field distribution across the surface.

Gauss Law For Magnetism

Equation

∮ B · dA = 0

Meaning

The net magnetic flux through any closed surface is zero in classical electromagnetism.

Explanation

Magnetic field lines do not begin or end at isolated magnetic poles in the conventional theory; they form continuous loops.

Applications

  • Electric generators

  • Transformers

  • Inductors

  • Magnetic flow sensors

  • Electromagnetic induction experiments

  • Magnetic-field measurement

Common Misconceptions

  • The angle in ΦB = BA cos(theta) is measured from the surface normal, not from the surface itself.

  • Magnetic flux is a scalar quantity, even though magnetic flux density is a vector.

  • A zero magnetic flux through a surface does not necessarily mean that the magnetic field is zero everywhere on that surface.

  • Magnetic flux through an open surface can be nonzero.

  • The net magnetic flux through a closed surface is zero, but the flux through an open surface need not be zero.

Learning Objectives

  • Define magnetic flux.

  • State its SI unit.

  • Calculate flux for a flat surface in a uniform magnetic field.

  • Explain the role of the surface normal.

  • Compare flux for different field orientations.

  • Connect magnetic flux to Faraday's law.

Key Takeaway

Magnetic flux measures the net magnetic field passing through a surface and depends on field strength, area, and orientation.

Related Topics

  • SCI-PHY-017-013

  • SCI-PHY-017-015

  • SCI-PHY-017-016

  • SCI-PHY-017-019

Sources and verification

Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.

Suggest a correction or source · More in Magnetism & Electromagnetism