Introduction
Many scientific equations describe general principles such as conservation of mass, momentum, and energy. However, these principles do not independently determine how every material responds to a force, temperature gradient, electric field, or chemical environment. A solid may deform elastically or plastically, a fluid may resist motion through viscosity, and a material may conduct heat or electricity at rates that depend on its internal structure. Constitutive relationships provide the additional mathematical descriptions needed to represent these responses.
Definition
Constitutive Relationship
A constitutive relationship is a mathematical relation connecting physical quantities that describe the response or internal behaviour of a material or medium under specified conditions.
Material Law
A material law is a constitutive description intended to represent a material's characteristic response, often using measurable or experimentally determined material properties.
Role In Scientific Models
Constitutive relationships connect the general governing equations of a physical system with the particular properties and behaviour of the material being modelled.
Distinction From Governing Laws
Governing Laws
Governing laws describe broad principles that apply to a class of physical systems, such as momentum conservation or energy conservation.
Constitutive Laws
Constitutive laws describe how a particular material or medium responds, such as how stress depends on deformation or how heat flux depends on a temperature gradient.
Why Both Are Needed
A governing conservation equation may contain unknown stresses, heat fluxes, or transport rates. Constitutive relationships express these quantities in terms of other variables, allowing the mathematical model to become sufficiently specified.
Major Constitutive Relationships
| Category | Description | Examples |
|---|---|---|
Mechanical constitutive relationships | Describe relationships among stress, strain, deformation, strain rate, and other mechanical variables. |
|
Fluid constitutive relationships | Describe how fluid stresses depend on velocity gradients and material properties. |
|
Thermal constitutive relationships | Describe heat transfer and thermal response in materials. |
|
Electrical and electromagnetic relationships | Describe how materials respond to electric and magnetic fields. |
|
Chemical and transport relationships | Describe the movement and response of substances within materials and fluids. |
|
Biological and soft-material relationships | Represent the mechanical, transport, and functional responses of biological tissues and complex soft materials. |
|
Mathematical Structure
General Form
R = g(S, T, C, ...)
Description
A response quantity R is represented as a function of one or more state variables, environmental conditions, and material parameters. In actual scientific models, the quantities may be scalars, vectors, or tensors.
State Dependence
Material response may depend on the current state, such as temperature, pressure, concentration, or deformation.
History Dependence
Some materials retain memory of previous loading, deformation, temperature, or environmental conditions. Their response may therefore depend on the history of the system rather than only its current state.
Directional Dependence
Some materials respond differently in different directions. Their constitutive descriptions must account for anisotropy and may require tensor relationships.
Nonlinearity
Many material responses are nonlinear, meaning that the response does not change in direct proportion to the applied condition.
Important Material Characteristics
| Characteristic | Description |
|---|---|
Elasticity | The ability of a material to recover its original configuration after a load is removed, within its elastic range. |
Plasticity | The ability of a material to undergo permanent deformation after exceeding an appropriate yield condition. |
Viscosity | A measure of resistance to flow or relative motion within a fluid or time-dependent material. |
Viscoelasticity | Behaviour combining elastic response with time-dependent viscous effects. |
Thermal conductivity | A property describing a material's ability to conduct heat, potentially depending on direction and temperature. |
Electrical conductivity | A property describing how readily electric current can flow through a material under an applied electric field. |
Permeability | A property describing how readily a fluid can move through a porous material under an appropriate driving condition. |
Compressibility | A measure of how a material's volume or density responds to changes in pressure. |
Classification By Behaviour
| Type | Description |
|---|---|
Linear constitutive relationships | The response is linearly related to the relevant input variables within the stated regime. Linear relationships often simplify analysis and numerical computation. |
Nonlinear constitutive relationships | The response depends nonlinearly on the input variables, as occurs in many large-deformation, plastic, biological, and non-Newtonian systems. |
Elastic relationships | Describe recoverable material response, often as a function of the current deformation state. |
Inelastic relationships | Represent material behaviour involving permanent deformation, irreversible changes, or dissipative processes. |
Rate-dependent relationships | Include the rate at which deformation, temperature, or another state variable changes. |
History-dependent relationships | Depend on previous states or loading history and may require internal variables or integral descriptions. |
Isotropic relationships | Represent materials whose response is identical in every direction under the relevant definition of isotropy. |
Anisotropic relationships | Represent materials whose response depends on direction, such as layered composites, crystals, and directionally structured biological tissues. |
Constitutive Model Development
| Step | Name | Description |
|---|---|---|
1 | Identify the material and physical process | Specify the material, its physical state, the process being studied, and the relevant range of temperature, pressure, deformation, or other conditions. |
2 | Identify the input and response quantities | Determine which quantities drive the material response and which quantities describe the resulting behaviour. |
3 | Determine relevant material characteristics | Examine whether the response is elastic, viscous, plastic, conductive, diffusive, anisotropic, nonlinear, or dependent on previous history. |
4 | Select a mathematical structure | Choose an algebraic, differential, integral, vector, or tensor representation appropriate to the material behaviour. |
5 | Apply physical and mathematical restrictions | Ensure that the relationship respects relevant conservation principles, material symmetries, dimensional consistency, and appropriate thermodynamic restrictions. |
6 | Determine material parameters | Estimate or measure the required coefficients using laboratory tests, field measurements, or established material data. |
7 | Calibrate and validate | Compare predicted material behaviour with experimental measurements and independent evidence across the intended range of conditions. |
8 | Establish the validity domain | Specify the temperatures, pressures, deformation ranges, frequencies, loading conditions, or other limits for which the material law is supported. |
Thermodynamic Admissibility
Definition
Thermodynamic admissibility means that a constitutive relationship is compatible with the relevant thermodynamic principles and does not permit physically unacceptable behaviour under the theory's assumptions.
Considerations
Energy balance must be respected.
Dissipative processes must satisfy the applicable entropy-production restrictions.
Material parameters should have physically meaningful values and appropriate dimensions.
The model should not predict impossible responses within its intended domain.
The assumed state variables should be sufficient to describe the material behaviour at the chosen modelling scale.
Importance
These restrictions help prevent mathematical relationships that fit a limited dataset but violate essential physical principles when used in a larger model.
Internal Variables And Material Memory
Definition
Internal variables are additional state quantities used to represent the material's internal condition, such as accumulated plastic deformation, damage, microstructural evolution, or other history-dependent effects.
Purpose
They allow a constitutive model to describe materials whose present response depends on changes that occurred earlier.
Examples
Plastic strain in a deforming solid.
Damage variables in a material undergoing progressive degradation.
Internal structural variables in viscoelastic or ageing materials.
Phase fractions in materials undergoing phase transformation.
Limitations
A material law is usually valid only for a specified range of conditions and physical states.
Real materials may exhibit complex behaviour that cannot be represented accurately by a simple relationship.
Material properties may vary with temperature, pressure, composition, microstructure, and time.
Experimental measurements may not adequately cover all relevant loading conditions.
A constitutive model may require many parameters that are difficult to measure independently.
Incorrect constitutive assumptions can produce inaccurate predictions even when the governing conservation equations are correct.
Different models may describe the same material adequately under limited conditions but diverge under more demanding conditions.
Common Mistakes
Confusing constitutive relationships with universal conservation laws.
Assuming that every material is isotropic or responds linearly.
Using a constant material property when it changes significantly with temperature or other conditions.
Ignoring loading history in materials with memory-dependent behaviour.
Applying a material law beyond its validated range.
Assuming that experimentally fitted parameters are universal constants.
Using an incomplete constitutive model that leaves the governing mathematical system underdetermined.
Applications
Predicting deformation and failure in engineering materials.
Modelling fluid flow and non-Newtonian material behaviour.
Simulating heat transfer in solids and fluids.
Describing electrical and magnetic responses of materials.
Investigating diffusion and transport through porous geological media.
Modelling biological tissues and soft materials.
Developing coupled thermal, mechanical, electrical, and chemical simulations.
Worked Example
Problem
Describe how a simple linear elastic material law connects mechanical deformation with material response.
Concept
For a sufficiently small uniaxial deformation of an ideal linear elastic material, stress is proportional to strain.
Relationship
σ = Eε
Interpretation
Stress represents the internal force intensity within the material.
Strain represents relative deformation.
Young's modulus E describes the material's stiffness in the specified elastic regime.
A larger modulus corresponds to a larger stress for the same strain under this simplified model.
Assumptions
The material is within its linear elastic range.
The deformation is sufficiently small.
The material behaviour can be treated as homogeneous and isotropic for this example.
Time-dependent and plastic effects are neglected.
Conclusion
The relationship is constitutive because it describes a material's mechanical response. It does not replace the conservation of momentum or other governing equations; it supplies a material-specific relationship needed to close a mechanical model.