✦ScienexySCIENCE KNOWLEDGE LIBRARY
concept · SCI-REF-001-035

Conservation-Based Mathematical Models

Conservation-based mathematical models are scientific models constructed from the principle that specified physical quantities cannot be created or destroyed within an appropriately defined system, although they may be transferred, transformed, or redistributed. They use balance relationships for quantities such as mass, energy, momentum, and electric charge to describe the behaviour of physical, chemical, biological, and environmental systems.

NameExpressionMeaning

General balance equation

Accumulation = Inflow - Outflow + Generation - Consumption

Represents the general accounting structure used to formulate a balance for a selected quantity.

Integral conservation balance

dB/dt = Φᵢₙ - Φₒᵤₜ + G - C

Describes the rate of change of an amount B stored within a system, with boundary transfers and internal generation and consumption.

General local conservation equation

∂ρ/∂t + ∇·J = s

Represents a local balance in which ρ is the density of a quantity, J is its flux, and s is its net local source per unit volume per unit time.

Steady-state balance

Inflow + Generation = Outflow + Consumption

Represents a balance when the accumulation of the selected quantity is zero.

Explanation

Introduction

Conservation principles provide some of the most powerful foundations for mathematical modeling in science. Instead of describing every microscopic interaction individually, a conservation-based model tracks how a quantity enters, leaves, accumulates within, or is generated or consumed by a defined system. These models are used in mechanics, thermodynamics, fluid dynamics, chemical engineering, ecology, hydrology, atmospheric science, and many other disciplines. Their central strength is that they connect local physical processes with the overall behaviour of a system through systematic accounting relationships.

Definition

A conservation-based mathematical model is a mathematical representation derived from a conservation or balance principle, describing how a specified quantity changes because of transport across system boundaries, internal accumulation, and any physically permitted sources or sinks.

Conservation And Balance

Conservation Principle

A conserved quantity remains constant for an isolated system when no permitted external transfer or non-conservative source or sink changes the total amount.

Balance Principle

A balance equation accounts for the change of a quantity within a system through inflows, outflows, production, consumption, and other relevant transfer processes.

Important Distinction

A balance equation can contain source and sink terms even when the underlying physical quantity is conserved at a more fundamental level. For example, a chemical species may be produced or consumed by reactions, while the total mass of the complete closed reacting system remains conserved.

General Balance Structure

Statement

Accumulation = Inflow - Outflow + Generation - Consumption

Description

This structure represents the change in a specified quantity within a chosen system. The exact mathematical form depends on the system boundary, the nature of the quantity, and the relevant physical processes.

Interpretation

  • Accumulation describes the rate at which the amount stored inside the system changes.

  • Inflow represents transfer into the system across its boundary.

  • Outflow represents transfer out of the system.

  • Generation represents production within the system.

  • Consumption represents removal through internal processes.

Closed System

For a closed system with no transfer of the relevant conserved quantity across its boundary, the balance may reduce to a statement that the total amount remains constant, provided there are no internal sources or sinks for that quantity.

Steady State

At steady state, accumulation is zero. This does not mean that all flows are zero; inflow and outflow may balance while the system continuously exchanges matter or energy with its surroundings.

Major Conservation Principles

PrincipleDescriptionApplications

Conservation of mass

Mass is conserved in ordinary chemical and physical processes when the complete system is considered and relativistic mass-energy conversion is outside the model's scope.

  • Fluid flow through pipes and channels.

  • Chemical reactors and mixing systems.

  • Groundwater and pollutant transport.

  • Atmospheric and oceanic circulation.

Conservation of energy

Energy is transferred or transformed between different forms, while the total energy of an appropriately defined isolated system remains constant.

  • Thermodynamic systems.

  • Heat engines and energy conversion.

  • Mechanical systems.

  • Chemical and biological energy transformations.

Conservation of linear momentum

The total linear momentum of an isolated system remains constant when the net external force is zero.

  • Fluid dynamics.

  • Collisions and mechanical systems.

  • Atmospheric and oceanic motion.

  • Transport of momentum in engineering processes.

Conservation of angular momentum

The total angular momentum of a system remains constant when the net external torque is zero.

  • Rotational mechanics.

  • Planetary and orbital dynamics.

  • Fluid vortices.

  • Astrophysical systems.

Conservation of electric charge

Electric charge is conserved in physical processes, with charge transfer represented by currents and charge accumulation.

  • Electrical circuits.

  • Electromagnetic field theory.

  • Plasma physics.

  • Electrochemical systems.

Species and component balances

The amount of an individual chemical species or biological component may change through reaction, production, consumption, or transfer, even when an appropriate total quantity is conserved.

  • Chemical reaction networks.

  • Biochemical systems.

  • Environmental pollutant transport.

  • Nutrient cycling and ecosystem models.

System Boundary And Control Volume

System

A system is the matter or physical entity selected for analysis. It may consist of a fixed quantity of matter or a defined region of space.

Control Volume

A control volume is a specified region in space through whose boundary matter and energy may flow. It is particularly useful in fluid mechanics and transport modeling.

Control Surface

A control surface is the boundary enclosing a control volume. Fluxes across this surface contribute to the balance equation.

Boundary Selection

The choice of system boundary determines which transfers count as inflows and outflows and which processes are treated as internal generation or consumption.

Importance

An incorrectly selected boundary can lead to missing or double-counted transfer terms, producing an incomplete mathematical model.

Integral And Differential Forms

Integral Form

An integral balance describes the total amount of a quantity stored within a finite region and the net transfer or production affecting that region.

Differential Form

A differential balance describes local behaviour at a point or within an infinitesimally small region. It is commonly obtained by applying the integral balance to a small control volume and using appropriate mathematical theorems.

Relationship

The integral form is useful for whole-system accounting and finite control volumes. The differential form is useful for describing local spatial and temporal changes, especially in continuum models.

Conditions

Converting between these forms requires suitable assumptions about continuity, differentiability, fields, boundaries, and the mathematical representation of fluxes and sources.

Flux And Transport

Definition

Flux describes the amount of a specified quantity transported through a unit area per unit time, with its precise meaning and units depending on the quantity being transported.

Mechanisms

MechanismDescription

Advection

Transport caused by the bulk motion of a fluid or moving medium.

Diffusion

Transport arising from spatial variations in concentration or another relevant potential, often associated with random microscopic motion.

Conduction

Transfer of energy through material interactions driven by a temperature gradient or another appropriate thermal mechanism.

Convection

Transport involving fluid motion and the associated transfer of a quantity by the moving medium.

Mechanical transport

Transfer of momentum or other mechanical quantities through forces, motion, and stresses.

Constitutive Connection

Fluxes are often represented using constitutive relationships, such as diffusion or heat-conduction laws. Conservation principles determine the balance structure, while constitutive laws describe how transport occurs.

Conservation Modeling Procedure

StepNameDescription

1

Choose the conserved or balanced quantity

Identify whether the model tracks mass, energy, momentum, charge, a chemical species, population, or another quantity.

2

Define the system or control volume

Specify the region, its boundary, and whether it is fixed or moving.

3

Identify stored quantities

Determine how much of the selected quantity is present inside the system and how this amount changes with time.

4

Identify all boundary transfers

List relevant inflows and outflows, including advective, diffusive, conductive, mechanical, or electrical transfers.

5

Identify internal sources and sinks

Determine whether reactions, production, consumption, external heating, or other processes create or remove the quantity being tracked.

6

Construct the balance equation

Combine accumulation, transfer, generation, and consumption terms using consistent sign conventions.

7

Introduce constitutive and auxiliary relationships

Represent unknown fluxes, material responses, reaction rates, or other quantities using appropriate physical or empirical relationships.

8

Apply initial and boundary conditions

Specify the starting state and the conditions governing exchange at the system boundaries.

9

Solve or simulate

Use analytical or numerical methods to determine the system's behaviour.

10

Check conservation and validate

Verify that the model accounts for all relevant transfers and compare its predictions with physical expectations or independent measurements.

Steady State And Transient Models

Steady State

A steady-state model assumes that the relevant stored quantity does not change with time at each modelled location. Continuous transfers may still occur, provided the local balance is maintained.

Transient

A transient model explicitly represents accumulation or depletion over time and is necessary when the system's state changes.

Quasi Steady State

A quasi-steady-state approximation treats some processes as adjusting rapidly compared with slower processes, allowing selected balance relationships to be simplified under justified time-scale assumptions.

Conservation And Numerical Modeling

Finite Volume Methods

Finite-volume methods formulate numerical equations by applying integral balance principles to small computational cells. They are widely used in fluid dynamics, heat transfer, and transport problems.

Finite Difference Methods

Finite-difference methods approximate derivatives using values at discrete points. Conservation properties depend on the formulation and discretization.

Finite Element Methods

Finite-element methods construct approximate solutions using weighted residual or variational formulations. Conservation behaviour depends on the governing formulation, approximation spaces, and numerical implementation.

Conservation Error

A numerical conservation error occurs when the computed total amount differs from the amount expected from the prescribed transfers and sources. Monitoring this error is important in long simulations and coupled systems.

Numerical Verification

A numerical model should be checked for convergence, sensitivity to grid resolution or time step, and appropriate conservation behaviour.

Coupled Conservation Models

Definition

Coupled conservation models use multiple balance equations to represent interacting quantities or physical processes within the same system.

Examples

  • Mass and energy balances in a chemical reactor.

  • Mass, momentum, and energy balances in compressible fluid flow.

  • Water, sediment, and pollutant balances in a river system.

  • Energy and mass balances in biological organisms.

  • Charge, species, and energy balances in electrochemical systems.

Coupling Mechanisms

The equations may be connected through shared variables, reaction terms, transport fluxes, temperature-dependent material properties, or interactions across physical interfaces.

Limitations

  • A conservation equation may be insufficient without constitutive relationships for fluxes and material responses.

  • Incorrect system boundaries can omit important exchanges or count them more than once.

  • A model may omit small-scale processes that become important under different conditions.

  • Source and sink terms may be difficult to measure or estimate accurately.

  • Numerical discretization can introduce conservation errors if the computational formulation is not appropriately designed.

  • Some quantities are conserved only when the complete relevant system is considered.

  • Chemical species, biological populations, and other components may be produced or consumed even when broader quantities remain conserved.

  • A mathematically balanced model may still be inaccurate if its constitutive relationships or boundary conditions are incorrect.

Common Mistakes

  • Assuming that conservation means no change in the quantity inside an open system.

  • Ignoring inflow or outflow when defining a system balance.

  • Confusing the conservation of total mass with the conservation of an individual chemical species.

  • Treating steady state as equivalent to a system with no movement or transfer.

  • Forgetting generation and consumption terms in reactive systems.

  • Using inconsistent units or sign conventions across balance terms.

  • Assuming that conservation equations alone determine every unknown in a physical model.

  • Failing to check whether numerical calculations preserve the expected total quantities.

Applications

  • Mass and energy accounting in chemical and industrial processes.

  • Fluid-flow modeling in rivers, oceans, pipes, and atmospheric systems.

  • Heat and energy transport in engineering and natural environments.

  • Momentum transport in mechanical and fluid systems.

  • Electric charge balance in circuits and electromagnetic systems.

  • Nutrient and population accounting in ecological systems.

  • Pollutant transport and environmental mass-balance analysis.

  • Numerical simulation of multiphysics and continuum systems.

Worked Example

Problem

A well-mixed tank contains a dissolved substance. Liquid enters and leaves at equal volumetric flow rates. The incoming liquid contains a different concentration from the tank.

System Definition

The tank and its contents form the control volume. The tracked quantity is the mass of dissolved substance inside the tank.

Assumptions

  • The tank is well mixed, so its concentration is spatially uniform.

  • The tank volume remains constant.

  • The inlet and outlet volumetric flow rates are equal.

  • No chemical reaction or other internal production or consumption occurs.

  • The fluid density is treated as constant.

Balance

Accumulation = Inlet mass flow rate - Outlet mass flow rate

Mathematical Model

d(VC)/dt = Q Cᵢ - Q C

Simplified Model

V dC/dt = Q(Cᵢ - C)

Interpretation

  • V is the constant tank volume.

  • C is the concentration inside the tank.

  • Cᵢ is the inlet concentration.

  • Q is the common inlet and outlet volumetric flow rate.

  • The concentration changes because the inlet and outlet carry different amounts of dissolved substance per unit time.

Physical Insight

If the inlet concentration is greater than the tank concentration, the stored amount increases. If the inlet concentration is lower, the stored amount decreases. At steady state, the tank concentration approaches the inlet concentration under the stated idealized assumptions.

Limitations

  • The model neglects spatial concentration gradients.

  • It does not include reaction, precipitation, adsorption, or other chemical processes.

  • It assumes constant volume and equal inlet and outlet flow rates.

  • It does not represent imperfect mixing or time-varying flow.

Conclusion

This example shows how a conservation-based model is constructed by identifying accumulation, inflow, and outflow before introducing assumptions that simplify the mathematical relationship.

Variables

SymbolMeaningUnit

B

Total amount of the selected quantity stored in the system

Depends on the conserved or balanced quantity

t

Time

Second (s)

Φᵢₙ

Rate of transfer into the system

Quantity per second

Φₒᵤₜ

Rate of transfer out of the system

Quantity per second

G

Internal generation rate

Quantity per second

C

Internal consumption rate in the general balance equation

Quantity per second

ρ

Amount of the balanced quantity per unit volume

Depends on the quantity being tracked

J

Flux of the balanced quantity

Quantity per area per second

s

Local source term per unit volume

Quantity per volume per second

∇·J

Divergence of the flux, representing net outward transport per unit volume

Same as ∂ρ/∂t

Example or application

FieldDescription

Fluid mechanics

Mass and momentum balances describe how fluids move through pipes, rivers, channels, and other flow systems.

Thermodynamics

Energy balances account for heating, cooling, work, and energy transfer in physical and chemical systems.

Chemical engineering

Component balances describe how chemical substances enter, leave, accumulate, and react inside industrial processes.

Environmental science

Mass-balance models track pollutants, nutrients, water, and other substances in rivers, lakes, soils, and atmospheric systems.

Ecology

Population and nutrient balances describe the movement and transformation of organisms and resources within ecological systems.

Electromagnetism

Charge conservation provides a mathematical basis for relationships among current, charge accumulation, and electromagnetic fields.

Definition

Conservation-based mathematical modeling is the formulation of scientific equations from balance principles that account for the accumulation, transfer, generation, and consumption of physical quantities within a defined system.

Purpose

  • Track the movement and accumulation of conserved or balanced quantities.

  • Represent the physical behaviour of systems using systematic accounting relationships.

  • Connect local transport processes with whole-system behaviour.

  • Develop models for mass, energy, momentum, and charge transfer.

  • Provide a mathematical foundation for numerical simulations of natural and engineered systems.

Importance

  • Conservation principles provide broadly applicable foundations for scientific modeling.

  • They help ensure that mathematical descriptions account consistently for transfers and transformations.

  • They connect fundamental physical laws with practical engineering and environmental models.

  • They provide systematic methods for identifying missing sources, sinks, or boundary exchanges.

  • They are central to numerical methods used in computational fluid dynamics, heat transfer, chemical engineering, and Earth-system science.

  • They allow different physical processes to be combined into coherent multiphysics models.

Related Topics

  • SCI-REF-001-019

  • SCI-REF-001-025

  • SCI-REF-001-029

  • SCI-REF-001-030

  • SCI-REF-001-034

Sources and verification

Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.

  • Robert W. Fox, Alan T. McDonald, Philip J. Pritchard and John W. Mitchell, Fox and McDonald's Introduction to Fluid Mechanics, Wiley.
  • Yunus A. Çengel and Michael A. Boles, Thermodynamics: An Engineering Approach, McGraw-Hill.
  • R. Byron Bird, Warren E. Stewart and Edwin N. Lightfoot, Transport Phenomena, Wiley.
  • J. N. Reddy, An Introduction to Continuum Mechanics, Cambridge University Press.

Suggest a correction or source · More in Scientific Formulas