An ideal blackbody absorbs all incident electromagnetic radiation and emits thermal radiation according to its temperature. The Stefan–Boltzmann law states that the total radiant exitance of a blackbody is proportional to the fourth power of its absolute temperature. The proportionality constant is the Stefan–Boltzmann constant, σ. For a real surface, the emitted radiant power is often approximated by multiplying the blackbody result by the surface emissivity ε, which lies between zero and one for ordinary passive surfaces. For an object exchanging radiation with a large surrounding environment at temperature Tₛ, a simplified net radiative heat-transfer expression is proportional to T⁴ − Tₛ⁴. The constant can be derived from Planck's blackbody radiation law by integrating the spectral distribution over all wavelengths and directions. It is therefore connected to the Boltzmann constant, Planck constant, speed of light and other fundamental constants. The Stefan–Boltzmann constant is not an arbitrary empirical fitting parameter; its value follows from the fundamental description of thermal radiation.
Stefan–Boltzmann Constant (σ)
The Stefan–Boltzmann constant is the proportionality constant in the Stefan–Boltzmann law, which describes the total thermal radiant power emitted per unit surface area by an ideal blackbody. It determines the strong dependence of thermal radiation on absolute temperature.
M = σT⁴
P = σAT⁴
P = εσAT⁴ (simplified gray-surface model)
σ = (2π⁵kB⁴)/(15h³c²)
σ = 5.670374419 × 10⁻⁸ W·m⁻²·K⁻⁴ (exact in the modern SI)
Explanation
Variables
| Symbol | Unit | Meaning |
|---|---|---|
σ | W·m⁻²·K⁻⁴ | Stefan–Boltzmann constant. |
M | W·m⁻² | Total radiant exitance, or emitted radiant power per unit surface area. |
P | W | Total emitted radiant power. |
A | m² | Emitting surface area. |
T | K | Absolute temperature of the emitting surface. |
ε | Dimensionless | Total hemispherical emissivity of the surface in the applicable model. |
h | J·s | Planck constant. |
kB | J·K⁻¹ | Boltzmann constant. |
c | m·s⁻¹ | Speed of light in vacuum. |
Example or application
A worked example has not yet been added.
Definition
The Stefan–Boltzmann constant is the universal proportionality constant relating the total radiant exitance of an ideal blackbody to the fourth power of its absolute temperature.
Purpose
To quantify the total thermal radiation emitted by blackbodies and provide a reference for estimating radiative heat transfer from real surfaces.
Importance
The constant is important in thermal engineering, astrophysics, climate science, radiative heat transfer, furnace design and temperature estimation from emitted radiation. The fourth-power temperature dependence makes it especially significant at high temperatures.
Worked Example
Problem
Calculate the radiant power emitted by an ideal blackbody surface of area 0.010 m² at 500 K.
Solution
Using P = σAT⁴, P = (5.670374419 × 10⁻⁸ W·m⁻²·K⁻⁴)(0.010 m²)(500 K)⁴ ≈ 35.44 W.
Interpretation
The ideal blackbody surface emits approximately 35.44 W of thermal radiation. A real surface with emissivity below one would emit less under the corresponding simplified model.
Applications
Estimating thermal radiation from hot objects.
Calculating radiative heat transfer in furnaces and industrial equipment.
Modeling energy emitted by stars and planets.
Studying Earth's radiative energy balance.
Developing non-contact temperature measurement methods.
Conditions And Limitations
The basic law applies directly to an ideal blackbody in thermal equilibrium.
For real surfaces, emissivity and its possible dependence on wavelength, direction and temperature must be considered.
Net radiative exchange requires accounting for radiation received from the surroundings and, in practical geometries, view factors.
Absolute temperature must be used; Celsius values cannot be substituted directly.
Common Misconceptions
The law describes total emitted radiation, not the radiation at one particular wavelength.
A real object does not necessarily emit as much radiation as a blackbody at the same temperature.
The emitted power depends on the fourth power of absolute temperature, not simply on temperature.
Related Topics
Wien Displacement Constant
Planck Radiation Law
First Radiation Constant
Second Radiation Constant
Thermal Equilibrium
Sources and verification
Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.
- M. F. Modest, Radiative Heat Transfer.
- R. Siegel and J. R. Howell, Thermal Radiation Heat Transfer.
- NIST, CODATA Recommended Values of the Fundamental Physical Constants.