The Loschmidt constant, commonly represented by n₀, is the number of particles per unit volume of an ideal gas at a specified standard or reference temperature and pressure. It is calculated from the ideal gas equation and Avogadro's constant. For a gas at pressure p and temperature T, the ideal-gas number density is n/V = p/(kBT). At a chosen reference state, this becomes the Loschmidt number density. The term standard conditions has been used with different temperature and pressure conventions in different scientific fields and historical references. Consequently, a Loschmidt constant must always be accompanied by its reference temperature and pressure. A commonly used historical reference is 273.15 K and 101,325 Pa, for which the number density is approximately 2.68678 × 10²⁵ m⁻³. Other reference pressures, including 100 kPa, produce a different value. The constant is a reference number density, not a new universal constant independent of conditions.
Loschmidt Constant (n₀)
The Loschmidt constant is the number density of an ideal gas under a specified reference temperature and pressure. It represents the number of gas particles contained in one cubic metre under those reference conditions and connects molar gas quantities with microscopic particle density.
n₀ = p₀/(kBT₀)
n₀ = Nₐp₀/(RT₀)
At T₀ = 273.15 K and p₀ = 101,325 Pa:
n₀ ≈ 2.68678 × 10²⁵ m⁻³
Explanation
Variables
| Symbol | Unit | Meaning |
|---|---|---|
n₀ | m⁻³ | Reference number density of gas particles. |
p₀ | Pa | Specified reference pressure. |
T₀ | K | Specified reference temperature. |
kB | J·K⁻¹ | Boltzmann constant. |
Nₐ | mol⁻¹ | Avogadro constant. |
R | J·mol⁻¹·K⁻¹ | Universal gas constant. |
Example or application
A worked example has not yet been added.
Definition
The Loschmidt constant is the number of particles per unit volume of an ideal gas at a specified reference temperature and pressure.
Purpose
To provide a reference particle number density for gases and connect macroscopic pressure and temperature with the microscopic number of particles per unit volume.
Importance
The Loschmidt constant is useful in molecular physics, kinetic theory, atmospheric science, gas-density calculations and laboratory reference measurements. It helps translate between molar concentration and molecular number density.
Worked Example
Problem
Calculate the ideal-gas number density at 273.15 K and 100,000 Pa.
Solution
Using n/V = p/(kBT), substitute p = 100,000 Pa and T = 273.15 K. The result is n/V ≈ 2.65165 × 10²⁵ m⁻³.
Interpretation
At 273.15 K and 100 kPa, an ideal gas contains approximately 2.65 × 10²⁵ particles per cubic metre. This differs from the traditional Loschmidt value at 101,325 Pa because the reference pressure is different.
Reference Conditions
| Temperature | Pressure | Number Density | Note |
|---|---|---|---|
273.15 K | 101,325 Pa | Approximately 2.68678 × 10²⁵ m⁻³ | Traditional reference state often used for the Loschmidt number. |
273.15 K | 100,000 Pa | Approximately 2.65165 × 10²⁵ m⁻³ | Reference value using a pressure of 100 kPa. |
Applications
Converting gas pressure and temperature into molecular number density.
Calculating molecular collision rates in kinetic theory.
Estimating atmospheric and laboratory gas concentrations.
Relating molar concentration to particle concentration.
Establishing reference conditions in gas measurements.
Conditions And Limitations
The numerical value depends on the chosen reference temperature and pressure.
The formula assumes ideal-gas behavior.
Real-gas deviations may become important at high pressures or near condensation.
The reference state must be stated whenever a numerical Loschmidt value is reported.
Common Misconceptions
The Loschmidt constant is not a single condition-independent number density.
It is not identical to Avogadro's constant, which describes the number of specified entities per mole.
Values calculated at 100 kPa and 101.325 kPa are not interchangeable.
Related Topics
Avogadro Constant
Boltzmann Constant
Universal Gas Constant
Ideal Gas Law
Molecular Number Density
Sources and verification
Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.
- J. O. Hirschfelder, C. F. Curtiss and R. B. Bird, Molecular Theory of Gases and Liquids.
- M. W. Zemansky and R. H. Dittman, Heat and Thermodynamics.
- IUPAC Gold Book, terminology for gas number density and standard conditions.