✦ScienexySCIENCE KNOWLEDGE LIBRARY
reference · SCI-REF-002-071

Elastic Moduli of Materials

Elastic moduli quantify the stiffness of materials by describing how strongly they resist deformation under applied forces. They are material properties that connect mechanical stress to elastic strain and are fundamental to solid mechanics, structural engineering, materials science, and mechanical design.

E = σₙ/ε; G = τ/γ; K = −p/(ΔV/V)

Explanation

When an external force acts on a solid, the material may change its shape or dimensions. If the deformation is recoverable after the force is removed, it is described as elastic deformation. Elastic moduli quantify the relationship between applied stress and the resulting strain within an appropriate elastic regime. The three principal elastic moduli are Young's modulus, shear modulus, and bulk modulus. Young's modulus describes resistance to longitudinal extension or compression, shear modulus describes resistance to angular deformation, and bulk modulus describes resistance to uniform volume change under pressure. These moduli depend on material composition, bonding, crystal structure, temperature, pressure, microstructure, and sometimes loading direction. For isotropic linear-elastic materials, the three moduli are mathematically related, so only two are independent. Anisotropic materials, including many single crystals and fibre-reinforced composites, require more general elastic descriptions involving stiffness or compliance tensors.

Variables

SymbolMeaningUnit

E

Young's modulus

Pa

G

Shear modulus

Pa

K

Bulk modulus

Pa

σₙ

Normal stress

Pa

ε

Longitudinal strain

Dimensionless

τ

Shear stress

Pa

γ

Engineering shear strain

Dimensionless

p

Applied hydrostatic pressure, taken as positive in compression

Pa

ΔV/V

Fractional volume change

Dimensionless

Example or application

A worked example has not yet been added.

Definition

An elastic modulus is a quantitative measure of a material's resistance to a specified type of elastic deformation, defined through the relationship between mechanical stress and strain.

Purpose

To characterize material stiffness and predict elastic deformation under tensile, compressive, shear, and hydrostatic loading.

Importance

Elastic moduli are essential for selecting engineering materials, calculating structural deflections, evaluating stress distributions, predicting vibration behaviour, designing mechanical components, and assessing the mechanical response of biological and geological materials.

Major Elastic Moduli

NameSymbolDescriptionTypical Applications

Young's modulus

E

Measures resistance to longitudinal elastic deformation. A larger value indicates that a greater normal stress is required to produce the same longitudinal strain.

Tensile testing, beam deflection, column deformation, and stiffness calculations.

Shear modulus

G

Measures resistance to shear deformation, in which parallel layers of a material move relative to one another.

Torsion of shafts, shear deformation, and mechanical vibration.

Bulk modulus

K

Measures resistance to uniform compression and describes the relationship between hydrostatic pressure and fractional volume change.

Fluid compression, pressure vessels, geological materials, and high-pressure physics.

Isotropic Elastic Relationships

Description

For a homogeneous, isotropic, linear-elastic material, Young's modulus, shear modulus, bulk modulus, and Poisson's ratio are related.

Relationships

  • E = 2G(1 + ν)

  • E = 3K(1 − 2ν)

  • E = 9KG/(3K + G)

  • G = 3KE/(9K − E)

Note

These relationships do not generally apply to anisotropic materials or materials exhibiting nonlinear, plastic, or strongly viscoelastic behaviour.

Typical Material Ranges

MaterialYoungs ModulusNote

Rubber-like elastomers

Approximately 0.001–0.1 GPa

Strongly dependent on formulation, temperature, and deformation rate.

Wood

Approximately 5–20 GPa along the grain

Highly anisotropic and dependent on moisture and species.

Aluminium alloys

Approximately 68–72 GPa

Varies with alloy composition and processing.

Steel

Approximately 190–210 GPa

Common engineering steels have relatively similar elastic moduli despite different strengths.

Diamond

Approximately 1,000–1,200 GPa

Values depend on crystallographic direction and measurement convention.

Worked Example

Problem

A metal specimen experiences a tensile stress of 100 MPa and an elastic longitudinal strain of 0.0005. Calculate Young's modulus.

Solution

  • Use E = σₙ/ε.

  • Convert stress: 100 MPa = 1.0 × 10⁸ Pa.

  • Strain = 0.0005.

  • E = (1.0 × 10⁸)/(5.0 × 10⁻⁴) Pa.

  • E = 2.0 × 10¹¹ Pa.

Answer

Young's modulus is 200 GPa.

Measurement Methods

  • Tensile testing measures the stress–strain response and determines Young's modulus from the initial linear elastic region.

  • Compression testing determines elastic response under compressive loading.

  • Torsion testing can determine shear modulus from torque and angular deformation.

  • Ultrasonic methods estimate elastic moduli using measured wave velocities, density, and appropriate elastic-wave relationships.

  • Resonance methods determine elastic properties from natural frequencies and specimen geometry.

Conditions And Limitations

  • The simple modulus definitions assume a specified elastic regime and appropriate stress and strain measures.

  • The initial linear stress–strain slope is not necessarily valid over the entire deformation range.

  • Elastic moduli depend on temperature, pressure, loading rate, material structure, and sometimes direction.

  • Anisotropic materials require direction-dependent elastic constants or a stiffness tensor.

  • Viscoelastic materials may exhibit time-dependent apparent moduli.

  • A material with a high elastic modulus is stiff, but it is not necessarily strong, hard, or fracture-resistant.

Common Misconceptions

  • Elastic modulus measures stiffness, not the maximum stress a material can withstand.

  • Young's modulus and tensile strength are different material properties.

  • A high Young's modulus does not guarantee high toughness.

  • The elastic moduli of anisotropic materials cannot always be represented by one direction-independent value.

Related Topics

  • Poisson's Ratio

  • Material Density and Specific Volume

  • Acoustic Velocity and Elastic Wave Constants

  • Stress and Strain

  • Mechanical Properties of Materials

Sources and verification

Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.

  • Callister and Rethwisch — Materials Science and Engineering: An Introduction.
  • Gere and Goodno — Mechanics of Materials.
  • Landau and Lifshitz — Theory of Elasticity.

Suggest a correction or source · More in Physical Constants