When a material is stretched in one direction, its dimensions perpendicular to the loading direction generally decrease. When compressed, its transverse dimensions generally increase. Poisson's ratio quantifies this relationship by comparing transverse strain with longitudinal strain and introducing a negative sign according to the conventional sign convention. For example, a metal rod under tensile loading becomes slightly longer and narrower. Its Poisson's ratio expresses the relative magnitude of the lateral contraction compared with the longitudinal extension. For homogeneous isotropic linear-elastic materials, Poisson's ratio is related to Young's modulus, shear modulus, and bulk modulus. Most ordinary engineering materials have positive Poisson's ratios, although certain specially structured materials exhibit negative values and are known as auxetic materials. The value can depend on direction, temperature, loading conditions, and microstructure.
Poisson's Ratio
Poisson's ratio describes the relationship between transverse deformation and longitudinal deformation when a material is stretched or compressed. It is an important dimensionless elastic property that helps characterize how materials change shape under mechanical loading.
ν = −εₜ/εₗ
Explanation
Variables
| Symbol | Meaning | Unit |
|---|---|---|
ν | Poisson's ratio | Dimensionless |
εₜ | Transverse strain, measured perpendicular to the loading direction | Dimensionless |
εₗ | Longitudinal strain, measured parallel to the loading direction | Dimensionless |
Example or application
A worked example has not yet been added.
Definition
Poisson's ratio is the negative ratio of transverse strain to longitudinal strain under uniaxial loading within the relevant elastic regime.
Purpose
To quantify lateral dimensional changes accompanying longitudinal tensile or compressive deformation.
Importance
Poisson's ratio is needed for elastic stress analysis, structural modelling, finite-element simulations, pressure-vessel design, wave propagation calculations, and the conversion between elastic moduli.
Physical Interpretation
A positive Poisson's ratio indicates that a material generally contracts laterally when stretched.
A negative Poisson's ratio indicates that the material expands laterally when stretched; such materials are called auxetic.
A value near zero indicates relatively little transverse strain compared with longitudinal strain.
For an isotropic linear-elastic material, Poisson's ratio influences the relationship between axial, shear, and volumetric deformation.
Isotropic Elastic Relationships
Description
For homogeneous isotropic linear-elastic materials, Poisson's ratio connects the principal elastic moduli.
Relationships
E = 2G(1 + ν)
K = E/[3(1 − 2ν)]
ν = (3K − 2G)/[2(3K + G)]
Typical Material Values
| Material | Approximate Range | Note |
|---|---|---|
Cork | 0.0–0.2 | Low transverse deformation is useful in some sealing applications. |
Steel | 0.27–0.30 | The value varies with composition and microstructure. |
Aluminium alloys | 0.32–0.35 | Representative values for many common alloys. |
Rubber-like elastomers | Often close to 0.5 | Many elastomers are approximately incompressible under ordinary elastic conditions. |
Auxetic engineered materials | Negative | The value depends on architecture, direction, and deformation range. |
Worked Example
Problem
A specimen is stretched so that its longitudinal strain is 0.002 while its transverse strain is −0.0006. Calculate Poisson's ratio.
Solution
Use ν = −εₜ/εₗ.
ν = −(−0.0006)/(0.002).
ν = 0.0006/0.002.
ν = 0.30.
Answer
Poisson's ratio is 0.30.
Measurement Methods
Uniaxial tensile testing measures longitudinal and transverse strains simultaneously.
Strain gauges can measure dimensional changes in different directions.
Digital image correlation can determine surface strain fields during deformation.
Ultrasonic measurements can estimate Poisson's ratio from longitudinal and shear wave velocities when the material model is appropriate.
Conditions And Limitations
The conventional definition applies to a specified loading direction and strain measurement.
For anisotropic materials, Poisson's ratio can depend on both loading and transverse measurement directions.
The value may vary with strain, temperature, pressure, and deformation rate.
The familiar isotropic stability range is −1 < ν < 0.5 for ordinary three-dimensional linear-elastic materials with positive elastic moduli.
The value ν = 0.5 represents the incompressible limit in the ideal isotropic linear-elastic model; real materials may only approach it.
Common Misconceptions
Poisson's ratio is not the ratio of transverse displacement to longitudinal displacement without accounting for the corresponding original dimensions.
A negative Poisson's ratio does not mean the material has negative stiffness.
Poisson's ratio is not necessarily the same in every direction for an anisotropic material.
A value near 0.5 indicates near-incompressibility in the isotropic linear-elastic model, not infinite tensile strength.
Related Topics
Elastic Moduli of Materials
Stress and Strain
Material Density and Specific Volume
Auxetic Materials
Acoustic Velocity and Elastic Wave Constants
Sources and verification
Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.
- Gere and Goodno — Mechanics of Materials.
- Landau and Lifshitz — Theory of Elasticity.
- Callister and Rethwisch — Materials Science and Engineering: An Introduction.