✦ScienexySCIENCE KNOWLEDGE LIBRARY
reference · SCI-REF-002-075

Specific Heat Capacity and Heat Capacity

Specific heat capacity and heat capacity quantify the energy required to raise the temperature of a material or system. Specific heat capacity is defined per unit mass, while heat capacity describes the entire object or system under specified conditions.

Q = mcΔT; C = Q/ΔT; c = C/m

Explanation

When a material absorbs thermal energy, its temperature may increase. The amount of energy required depends on the material, its mass, its initial state, and the conditions under which heating occurs. Heat capacity is the amount of heat required to raise the temperature of an entire system by one kelvin. Specific heat capacity is heat capacity per unit mass. For a simple temperature-independent approximation over a small range, the heat transferred is proportional to mass, specific heat capacity, and temperature change. However, specific heat capacity generally varies with temperature and can depend on pressure, volume, phase, and material structure. For gases and other compressible substances, heat capacity at constant pressure differs from heat capacity at constant volume. During a phase transition, energy may be absorbed or released without a temperature change; latent heat must then be considered separately. In solids, liquids, and gases, heat capacity arises from the ways energy can be stored in molecular motion, vibrations, rotations, electronic states, and other internal degrees of freedom.

Variables

SymbolMeaningUnit

Q

Heat transferred to or from the system

J

m

Mass of the material

kg

c

Specific heat capacity

J·kg⁻¹·K⁻¹

C

Heat capacity of the entire system

J·K⁻¹

ΔT

Temperature change

K

Example or application

A worked example has not yet been added.

Definition

Specific heat capacity is the heat capacity per unit mass of a material, while heat capacity is the thermal energy required to raise the temperature of an entire system by one kelvin.

Purpose

To quantify the thermal energy required to change the temperature of a material or system.

Importance

Heat capacity and specific heat capacity are essential in calorimetry, thermal engineering, climate science, cooking, energy storage, industrial heating, cooling systems, and the design of materials exposed to temperature changes.

Related Heat Capacities

NameSymbolDescription

Heat capacity at constant pressure

Cₚ

Heat capacity measured when pressure is held constant.

Heat capacity at constant volume

Cᵥ

Heat capacity measured when volume is held constant.

Molar heat capacity

Cₘ

Heat capacity per mole of substance, commonly expressed in J·mol⁻¹·K⁻¹.

Specific heat capacity

c

Heat capacity per unit mass, commonly expressed in J·kg⁻¹·K⁻¹.

Thermodynamic Distinction

Description

For a simple compressible substance, heat capacities at constant pressure and constant volume are distinct thermodynamic properties.

Definitions

  • Cₚ = (∂H/∂T)ₚ

  • Cᵥ = (∂U/∂T)ᵥ

Ideal Gas Relation

Cₚ − Cᵥ = nR for an ideal-gas sample, or cₚ,m − cᵥ,m = R for molar heat capacities.

Note

The distinction is particularly important for gases. For many solids and liquids under ordinary conditions, the difference between mass-specific heat capacities at constant pressure and volume is relatively small.

Typical Specific Heat Capacities

MaterialApproximate ValueNote

Water (liquid near room temperature)

4,180 J·kg⁻¹·K⁻¹

Varies with temperature and pressure.

Ice near 0 °C

Approximately 2,100 J·kg⁻¹·K⁻¹

Depends on temperature and crystal conditions.

Aluminium

Approximately 900 J·kg⁻¹·K⁻¹

Representative value near room temperature.

Copper

Approximately 385 J·kg⁻¹·K⁻¹

Representative value near room temperature.

Iron

Approximately 450 J·kg⁻¹·K⁻¹

Varies with phase and temperature.

Worked Example

Problem

Calculate the heat required to raise the temperature of 2 kg of water by 10 K, using a specific heat capacity of 4,180 J·kg⁻¹·K⁻¹.

Solution

  • Use Q = mcΔT.

  • m = 2 kg, c = 4,180 J·kg⁻¹·K⁻¹, and ΔT = 10 K.

  • Q = 2 × 4,180 × 10 J.

  • Q = 83,600 J.

Answer

The required heat is 83.6 kJ.

Measurement Methods

  • Calorimetry determines heat capacity by measuring energy transfer and temperature change under controlled conditions.

  • Differential scanning calorimetry measures heat-flow differences and can determine heat capacity over a temperature range.

  • Adiabatic calorimetry measures heat capacity while minimizing heat exchange with the surroundings.

  • For solids, heat capacity can also be estimated through spectroscopic, theoretical, and statistical-mechanical methods.

Conditions And Limitations

  • The relation Q = mcΔT assumes approximately constant specific heat capacity over the temperature interval.

  • For large temperature changes, heat capacity should be treated as temperature-dependent and integrated over the interval.

  • Phase transitions require latent-heat terms and cannot be described by a simple sensible-heat calculation alone.

  • The measured value depends on whether pressure or volume is held constant when that distinction is relevant.

  • Heat transfer to the surroundings and incomplete thermal equilibration can affect experimental results.

Common Misconceptions

  • Specific heat capacity and heat capacity are not interchangeable; one is per unit mass and the other belongs to the whole system.

  • A high specific heat capacity does not mean that a material has high thermal conductivity.

  • Heat capacity is not the same as thermal energy already stored in a body.

  • The equation Q = mcΔT does not by itself account for phase changes.

Related Topics

  • Thermal Conductivity of Materials

  • Material Density and Specific Volume

  • Coefficients of Thermal Expansion

  • Universal Gas Constant

  • Thermodynamics

Sources and verification

Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.

  • Atkins and de Paula — Physical Chemistry.
  • Çengel and Boles — Thermodynamics: An Engineering Approach.
  • NIST — Chemistry WebBook and thermophysical reference data.

Suggest a correction or source · More in Physical Constants