✦ScienexySCIENCE KNOWLEDGE LIBRARY
reference · SCI-REF-002-076

Coefficients of Thermal Expansion

Coefficients of thermal expansion quantify how the dimensions or volume of a material change with temperature. They are material-dependent properties that are essential in structural design, thermal engineering, manufacturing, and the study of material stability under temperature variations.

αₗ = (1/L)(dL/dT); β = (1/V)(dV/dT)

Explanation

Most materials change their dimensions when their temperature changes. Heating generally increases the average separation between atoms or molecules, producing expansion, while cooling generally produces contraction. The coefficient of thermal expansion quantifies the rate of dimensional or volumetric change per unit temperature change. Linear expansion describes changes in length, area expansion describes changes in surface area, and volumetric expansion describes changes in volume. For isotropic solids undergoing small temperature changes, the volumetric expansion coefficient is approximately three times the linear expansion coefficient. This relationship does not generally hold for anisotropic materials or large temperature ranges. Thermal expansion arises from the anharmonic nature of interatomic potential energy: atomic vibrations become asymmetric around equilibrium positions as temperature increases. Some materials show unusual behaviour, including negative thermal expansion over particular temperature ranges. Thermal expansion is important when different materials are joined together because unequal expansion can create thermal stress, distortion, cracking, or mechanical failure.

Variables

SymbolMeaningUnit

αₗ

Linear coefficient of thermal expansion

K⁻¹

β

Volumetric coefficient of thermal expansion

K⁻¹

L

Original or instantaneous length, according to the definition used

m

V

Original or instantaneous volume, according to the definition used

m³

T

Absolute temperature

K

Example or application

A worked example has not yet been added.

Definition

A coefficient of thermal expansion is the fractional change in a material's length, area, or volume per unit change in temperature under specified conditions.

Purpose

To quantify dimensional changes caused by temperature variations and predict thermal expansion or contraction in materials and components.

Importance

Thermal expansion coefficients are required for designing bridges, railway tracks, pipelines, engines, electronic devices, precision instruments, composite structures, and components exposed to repeated heating and cooling.

Types Of Thermal Expansion

NameSymbolDescription

Linear expansion coefficient

αₗ

Describes fractional change in length per unit temperature change.

Area expansion coefficient

αₐ

Describes fractional change in surface area per unit temperature change.

Volumetric expansion coefficient

β

Describes fractional change in volume per unit temperature change.

Isotropic Solid Relationships

Description

For an isotropic solid with small thermal expansion and approximately constant coefficients over the temperature interval:

Relationships

  • αₐ ≈ 2αₗ

  • β ≈ 3αₗ

Note

These approximations assume small strains and isotropic expansion. They should not be applied automatically to anisotropic crystals or materials with unusual expansion behaviour.

Typical Linear Expansion Values

MaterialApproximate RangeNote

Invar-type alloy

Approximately 0.5–2 × 10⁻⁶ K⁻¹

Low expansion depends on alloy composition and temperature.

Steel

Approximately 11–13 × 10⁻⁶ K⁻¹

Varies with grade and temperature.

Copper

Approximately 16–17 × 10⁻⁶ K⁻¹

Representative room-temperature range.

Aluminium

Approximately 22–24 × 10⁻⁶ K⁻¹

Depends on alloy composition.

Fused silica

Approximately 0.5 × 10⁻⁶ K⁻¹

Very low expansion compared with many ordinary glasses.

Physical Mechanism

In most solids, atoms vibrate around equilibrium positions in an asymmetric interatomic potential. As temperature increases, the average interatomic separation generally increases, producing macroscopic expansion. The effect depends on bonding strength, crystal structure, anharmonicity, and temperature.

Worked Example

Problem

A steel rod has an initial length of 2.0 m. Its linear expansion coefficient is 12 × 10⁻⁶ K⁻¹. Estimate its length increase when its temperature rises by 50 K.

Solution

  • For a small temperature interval, use ΔL = αₗL₀ΔT.

  • αₗ = 12 × 10⁻⁶ K⁻¹, L₀ = 2.0 m, and ΔT = 50 K.

  • ΔL = (12 × 10⁻⁶)(2.0)(50) m.

  • ΔL = 0.0012 m = 1.2 mm.

Answer

The rod expands by approximately 1.2 mm.

Anisotropic Expansion

Description

In anisotropic materials, expansion can differ along different crystallographic or structural directions. A thermal expansion tensor is then used to represent directional behaviour.

Note

Single crystals, fibre composites, layered materials, and some engineered structures can have strongly direction-dependent thermal expansion.

Measurement Methods

  • Dilatometry measures dimensional change as a function of temperature.

  • Thermomechanical analysis measures changes in specimen dimensions under controlled temperature and applied force.

  • Interferometric techniques can measure extremely small thermal dimensional changes.

  • X-ray diffraction can determine temperature-dependent lattice parameters and estimate crystallographic thermal expansion.

Conditions And Limitations

  • Expansion coefficients depend on temperature and may change significantly across wide temperature intervals.

  • The constant-coefficient approximation is appropriate only when the coefficient changes little over the temperature range.

  • Anisotropic materials require direction-specific coefficients or a tensor description.

  • Phase transformations can produce abrupt dimensional changes that cannot be described by ordinary thermal expansion coefficients alone.

  • Thermal expansion can be constrained by surrounding components, producing thermal stresses.

Common Misconceptions

  • Thermal expansion is not always positive; some materials exhibit negative expansion over particular temperature ranges.

  • The coefficient of thermal expansion is not the same as thermal conductivity.

  • The approximate relation β ≈ 3αₗ applies to isotropic solids under small-strain conditions, not every material.

  • A material with a low thermal expansion coefficient is not necessarily a good thermal insulator.

Related Topics

  • Elastic Moduli of Materials

  • Thermal Conductivity of Materials

  • Specific Heat Capacity and Heat Capacity

  • Material Density and Specific Volume

  • Thermal Stress

Sources and verification

Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.

  • Callister and Rethwisch — Materials Science and Engineering: An Introduction.
  • Incropera et al. — Fundamentals of Heat and Mass Transfer.
  • ASM Handbook — Materials Properties.

Suggest a correction or source · More in Physical Constants