✦ScienexySCIENCE KNOWLEDGE LIBRARY
reference · SCI-REF-002-081

Electrical Resistivity and Conductivity

Electrical resistivity and conductivity describe how strongly a material opposes or permits electric current. Resistivity quantifies opposition to current flow as an intrinsic material property, while conductivity is its reciprocal in the isotropic scalar case.

J = σₑE; ρₑ = 1/σₑ

Explanation

When an electric field is applied to a material, mobile charge carriers can produce an electric current. The ease with which current flows depends on carrier concentration, carrier mobility, scattering mechanisms, electronic structure, temperature, and material composition. Electrical conductivity quantifies the relationship between current density and electric field in a linear conducting medium. Resistivity is the reciprocal of conductivity for an isotropic material described by scalar values. Metals generally have high conductivity because they contain mobile electronic carriers. Insulators have very low conductivity under ordinary conditions because charge carriers are strongly restricted. Semiconductors have intermediate and highly controllable conductivity, which can change significantly with doping, temperature, illumination, and applied fields. In anisotropic materials, conductivity and resistivity are tensors. In nonlinear or frequency-dependent systems, a single constant value may not adequately describe electrical response.

Variables

SymbolMeaningUnit

J

Electric current density

A·m⁻²

σₑ

Electrical conductivity

S·m⁻¹

E

Electric field

V·m⁻¹

ρₑ

Electrical resistivity

Ω·m

Example or application

A worked example has not yet been added.

Definition

Electrical resistivity is a material property that quantifies opposition to electric current, while electrical conductivity quantifies the ability of a material to carry electric current.

Purpose

To characterize electrical transport in materials and predict current flow, voltage drop, power dissipation, and electrical losses.

Importance

Electrical resistivity and conductivity are fundamental to power systems, electronic circuits, semiconductor devices, electrical wiring, sensors, electrochemical systems, and materials selection.

Material Classification

ClassDescriptionExamples

Conductors

Materials with relatively high electrical conductivity and low resistivity.

Copper, silver, aluminium, and many metals.

Semiconductors

Materials whose conductivity can be controlled through doping, temperature, illumination, or electric fields.

Silicon, germanium, and gallium arsenide.

Insulators

Materials with very low electrical conductivity under ordinary operating conditions.

Glass, many ceramics, rubber, and polymers.

Typical Electrical Resistivities

MaterialApproximate ValueNote

Silver

1.59 × 10⁻⁸ Ω·m

Representative value near room temperature.

Copper

1.68 × 10⁻⁸ Ω·m

Depends on purity and temperature.

Aluminium

2.65 × 10⁻⁸ Ω·m

Representative value near room temperature.

Nichrome

Approximately 1.0–1.5 × 10⁻⁶ Ω·m

Varies with alloy composition.

Silicon

Highly variable

Depends strongly on doping, temperature, illumination, and purity.

Geometric Resistance Relation

Description

For a uniform conductor of length L and cross-sectional area A, with scalar resistivity ρₑ:

Formula

R = ρₑL/A

Variables

SymbolMeaningUnit

R

Electrical resistance

Ω

L

Conductor length

m

A

Cross-sectional area

m²

Microscopic Interpretation

Description

In a simple Drude-type model, conductivity depends on charge-carrier density, charge magnitude, and average momentum-relaxation time.

Formula

σₑ = ne²τ/m*

Variables

SymbolMeaningUnit

n

Mobile carrier number density

m⁻³

e

Elementary charge magnitude

C

τ

Momentum-relaxation time

s

m*

Effective carrier mass in the model

kg

Note

This is a simplified classical transport model. Real materials, especially crystalline semiconductors and complex conductors, require more advanced electronic-structure and transport descriptions.

Temperature Dependence

  • In many metals, resistivity increases with temperature because lattice vibrations increase carrier scattering.

  • In many semiconductors, conductivity increases with temperature because additional charge carriers become available.

  • Alloys and disordered materials can have different temperature dependencies from pure metals.

  • Superconductors exhibit zero DC electrical resistance below a material-dependent critical temperature under suitable conditions.

Worked Example

Problem

A copper wire has resistivity 1.68 × 10⁻⁸ Ω·m, length 5 m, and cross-sectional area 1.0 × 10⁻⁶ m². Calculate its resistance.

Solution

  • Use R = ρₑL/A.

  • R = (1.68 × 10⁻⁸ × 5)/(1.0 × 10⁻⁶) Ω.

  • R = 0.084 Ω.

Answer

The wire resistance is approximately 0.084 Ω.

Measurement Methods

  • Four-point probe measurements reduce the influence of contact resistance when determining resistivity.

  • Van der Pauw methods determine sheet resistance and resistivity for suitable samples.

  • Four-terminal resistance measurements are useful for low-resistance conductors.

  • Hall-effect measurements provide carrier type, concentration, and mobility information in suitable materials.

  • Impedance spectroscopy characterizes frequency-dependent electrical response.

Conditions And Limitations

  • The relation ρₑ = 1/σₑ applies directly to scalar, isotropic, linear-response materials.

  • Conductivity and resistivity depend on temperature, composition, microstructure, and applied-field conditions.

  • Anisotropic materials require tensor descriptions.

  • At high frequencies, conductivity can be complex and frequency-dependent.

  • Contact resistance and sample geometry can influence experimental measurements.

  • The zero-resistance state of a superconductor is a distinct physical state and should not be treated as ordinary high conductivity.

Common Misconceptions

  • Electrical resistance depends on both material properties and specimen geometry, whereas resistivity is an intrinsic material property under specified conditions.

  • Conductivity is not the same as current; current also depends on geometry and applied voltage.

  • A high-conductivity material is not necessarily a good thermal insulator.

  • Semiconductor resistivity cannot be represented by one universal value.

Related Topics

  • Dielectric Constants and Relative Permittivity

  • Magnetic Susceptibility and Relative Permeability

  • Molecular Diffusion and Transport Coefficients

  • Electrical Resistance

  • Semiconductor Physics

Sources and verification

Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.

  • Kittel — Introduction to Solid State Physics.
  • Ashcroft and Mermin — Solid State Physics.
  • Callister and Rethwisch — Materials Science and Engineering: An Introduction.

Suggest a correction or source · More in Physical Constants