Molecules within a bulk liquid experience intermolecular interactions from neighbouring molecules in many directions. Molecules at a liquid surface experience a different environment because the neighbouring material is not the same on every side. This produces an energetic cost associated with creating additional surface area. Surface tension quantifies this effect and explains phenomena such as capillary rise, droplet formation, liquid spreading, and the tendency of a liquid surface to minimize its area under suitable conditions. Interfacial energy describes the free-energy cost per unit area of an interface between two phases, such as liquid–gas, liquid–liquid, solid–liquid, or solid–solid boundaries. For a simple liquid–gas interface at equilibrium, surface tension is numerically equal to surface free energy per unit area under the relevant thermodynamic conditions. In solid surfaces and interfaces, the relationship between mechanical surface stress and surface free energy can be more complicated because the solid may deform and its surface energy can depend on strain.
Surface Tension and Interfacial Energy
Surface tension and interfacial energy describe the energetic cost of creating or expanding an interface between phases. Surface tension is commonly expressed as force per unit length or energy per unit area, while interfacial energy generalizes the concept to interfaces between different materials or phases.
γ = dG/dA; F = γL
Explanation
Variables
| Symbol | Meaning | Unit |
|---|---|---|
γ | Surface tension or interfacial free energy per unit area under the appropriate conditions | N·m⁻¹ or J·m⁻² |
G | Gibbs free energy | J |
A | Interfacial area | m² |
F | Force exerted along a boundary | N |
L | Length of the relevant boundary | m |
Example or application
A worked example has not yet been added.
Definition
Surface tension is the reversible work required to increase the area of a liquid interface per unit area under specified conditions, equivalently the force per unit length along an interface. Interfacial energy is the free-energy cost per unit area of forming an interface between phases.
Purpose
To quantify the energetic and mechanical behaviour of interfaces and predict phenomena involving droplets, bubbles, wetting, capillarity, and phase boundaries.
Importance
Surface tension and interfacial energy are essential in fluid mechanics, materials processing, coatings, detergents, emulsions, microfluidics, metallurgy, crystal growth, and biological membranes.
Physical Mechanisms
| Mechanism | Description |
|---|---|
Molecular cohesion | Intermolecular attractions create an energetic difference between molecules at an interface and molecules in the bulk. |
Surface-area minimization | A system tends to reduce interfacial free energy when other constraints permit, helping explain droplet formation and coalescence. |
Adsorption and surfactants | Surface-active molecules accumulate at interfaces and can reduce surface tension by changing interfacial composition and free energy. |
Related Interfacial Quantities
| Name | Symbol | Description |
|---|---|---|
Liquid–gas surface tension | γ | The surface tension of a liquid against its vapour or another gas. |
Liquid–liquid interfacial tension | γ₁₂ | The energetic and mechanical property of the interface between two immiscible liquids. |
Solid–liquid interfacial energy | γSL | The free-energy cost associated with the boundary between a solid and a liquid. |
Solid–solid interfacial energy | γSS | The free-energy cost associated with a boundary between two solid phases or grains. |
Capillarity And Wetting
Description
Surface tension and interfacial energies determine how a liquid interacts with a solid surface.
Young Equation
γSV = γSL + γLV cos θ
Variables
| Symbol | Meaning |
|---|---|
γSV | Solid–vapour interfacial energy |
γSL | Solid–liquid interfacial energy |
γLV | Liquid–vapour surface tension |
θ | Equilibrium contact angle measured through the liquid |
Interpretation
A small contact angle indicates strong wetting under the specified surface conditions.
A large contact angle indicates weaker wetting.
Surface contamination, roughness, chemical heterogeneity, and contact-angle hysteresis can alter observed wetting.
Capillary Rise
Description
For a cylindrical capillary tube under ideal static conditions, the height of capillary rise is related to surface tension and contact angle.
Formula
h = 2γ cos θ/(ρgr)
Variables
| Symbol | Meaning | Unit |
|---|---|---|
h | Capillary rise or depression | m |
γ | Liquid surface tension | N·m⁻¹ |
θ | Contact angle | Dimensionless angle |
ρ | Liquid density | kg·m⁻³ |
g | Gravitational acceleration | m·s⁻² |
r | Capillary tube radius | m |
Typical Surface Tensions
| Material | Approximate Value | Note |
|---|---|---|
Water against air near 20 °C | 72.8 mN·m⁻¹ | Sensitive to temperature and dissolved or surface-active contaminants. |
Ethanol against air near room temperature | Approximately 22 mN·m⁻¹ | Depends on purity and temperature. |
Mercury against air near room temperature | Approximately 485 mN·m⁻¹ | Representative value; surface condition matters. |
Worked Example
Problem
A liquid has surface tension 0.072 N·m⁻¹. Calculate the force along a straight boundary of length 0.05 m for a single liquid surface.
Solution
Use F = γL.
γ = 0.072 N·m⁻¹ and L = 0.05 m.
F = 0.072 × 0.05 N.
F = 0.0036 N.
Answer
The force is 3.6 × 10⁻³ N for the specified single interface.
Measurement Methods
Du Noüy ring methods determine surface tension from the force required to detach a ring from a liquid surface.
Wilhelmy plate methods measure force on a wetted plate.
Pendant-drop analysis estimates surface tension from the shape of a suspended droplet.
Sessile-drop methods determine contact angles and investigate wetting behaviour.
Atomic force microscopy and specialized techniques can estimate solid interfacial properties.
Conditions And Limitations
Surface tension depends on temperature, composition, impurities, and adsorption at the interface.
The equality between surface tension and surface free energy per unit area is straightforward for simple fluid interfaces under appropriate equilibrium conditions, but solid surface stress can require a more general treatment.
The force relation depends on interface geometry and the number of liquid surfaces involved.
Contact angles can depend on surface roughness, chemical heterogeneity, and measurement history.
Dynamic interfaces may have surface tensions different from equilibrium values.
Common Misconceptions
Surface tension is not a force with units of newtons; its SI unit is N·m⁻¹.
Interfacial energy and surface tension are related but should not be treated as universally interchangeable for all solid interfaces.
A liquid's surface tension is not independent of temperature or composition.
A low surface tension does not automatically guarantee complete wetting of every solid surface.
Related Topics
Molecular Dipole Moment Reference Quantities
Molecular Polarizability
Material Density and Specific Volume
Fluid Mechanics
Materials Interfaces
Sources and verification
Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.
- Adamson and Gast — Physical Chemistry of Surfaces.
- de Gennes, Brochard-Wyart and Quéré — Capillarity and Wetting Phenomena.
- Atkins' Physical Chemistry — Interfaces and colloids.