✦ScienexySCIENCE KNOWLEDGE LIBRARY
reference · SCI-REF-002-086

Acoustic Velocity and Elastic Wave Constants

Acoustic velocity and elastic wave constants describe how mechanical disturbances propagate through gases, liquids, and solids. Wave speeds depend on density, elastic properties, propagation direction, and material structure, making them useful for nondestructive testing, seismology, materials characterization, and acoustic engineering.

v = √(M/ρ)

Explanation

An acoustic wave is a propagating disturbance involving pressure, density, displacement, or stress variations in a medium. Its propagation speed depends on the medium's ability to resist deformation and its inertia. In fluids, sound speed is related to the bulk modulus and density. In solids, different elastic wave modes can propagate, including longitudinal and shear waves. Their velocities depend on elastic moduli and density. In isotropic solids, longitudinal waves involve particle displacement parallel to the direction of propagation, while shear waves involve displacement perpendicular to the propagation direction. In anisotropic crystals, wave velocities depend on direction and polarization and are determined by the Christoffel equation. Acoustic velocities are also influenced by temperature, pressure, porosity, cracks, grain structure, and frequency. In viscoelastic or strongly dispersive materials, wave speed and attenuation may depend on frequency.

Variables

SymbolMeaningUnit

v

Acoustic or elastic wave velocity

m·s⁻¹

M

Relevant elastic modulus for the specified wave mode and material model

Pa

ρ

Mass density

kg·m⁻³

Example or application

A worked example has not yet been added.

Definition

Acoustic velocity is the speed at which a mechanical wave propagates through a medium, while elastic wave constants are material properties that determine the wave's propagation behaviour and response.

Purpose

To quantify the propagation of acoustic and elastic disturbances and connect measurable wave speeds with material stiffness and density.

Importance

Acoustic velocities are used in ultrasound, nondestructive evaluation, seismic exploration, geological modelling, medical imaging, acoustic sensors, material testing, and the determination of elastic constants.

Wave Modes

NameDescription

Longitudinal wave

Particle displacement is parallel to the propagation direction. In an isotropic solid, its velocity depends on both bulk and shear resistance.

Shear wave

Particle displacement is perpendicular to the propagation direction. It requires shear rigidity and therefore does not propagate as a bulk shear wave through an ideal inviscid fluid.

Surface acoustic wave

A wave whose energy is concentrated near a material surface or interface. Its velocity depends on material properties and surface geometry.

Plate and guided waves

Elastic waves guided by finite structures such as plates, shells, or rods. Their velocities can depend on frequency and geometry.

Isotropic Solid Relationships

Description

For a homogeneous isotropic linear-elastic solid, longitudinal and shear wave velocities are related to elastic moduli and density.

Relationships

  • vL = √[(K + 4G/3)/ρ]

  • vS = √(G/ρ)

  • vL = √[E(1 − ν)/{ρ(1 + ν)(1 − 2ν)}]

Variables

SymbolMeaningUnit

vL

Longitudinal wave velocity

m·s⁻¹

vS

Shear wave velocity

m·s⁻¹

K

Bulk modulus

Pa

G

Shear modulus

Pa

E

Young's modulus

Pa

ν

Poisson's ratio

Dimensionless

ρ

Mass density

kg·m⁻³

Fluid Sound Velocity

Description

In a fluid, the speed of small-amplitude sound waves is related to the adiabatic bulk modulus and equilibrium density.

Formula

cₛ = √(Kₛ/ρ) = √[(∂p/∂ρ)ₛ]

Variables

SymbolMeaningUnit

cₛ

Speed of sound in the fluid

m·s⁻¹

Kₛ

Adiabatic bulk modulus

Pa

p

Pressure

Pa

ρ

Fluid density

kg·m⁻³

Note

For sufficiently rapid acoustic oscillations in ordinary gases, the compression and expansion are approximately adiabatic rather than isothermal.

Anisotropic Elastic Waves

Description

In anisotropic solids, elastic wave propagation depends on direction and polarization. The allowed wave velocities are determined by the Christoffel equation.

Formula

det(Γᵢₖ − ρv²δᵢₖ) = 0

Explanation

The Christoffel matrix Γᵢₖ is constructed from the elastic stiffness tensor and the direction of wave propagation. Solving the eigenvalue problem gives the allowed wave speeds and corresponding polarization directions.

Typical Acoustic Velocities

MaterialApproximate VelocityNote

Air near 20 °C

343 m·s⁻¹

Depends on temperature, humidity, and gas composition.

Water near room temperature

Approximately 1,480 m·s⁻¹

Depends on temperature, pressure, and salinity.

Aluminium

Longitudinal velocity approximately 6,300 m·s⁻¹

Depends on alloy, microstructure, and measurement direction.

Steel

Longitudinal velocity approximately 5,900 m·s⁻¹

Representative value; grade and microstructure matter.

Glass

Longitudinal velocity commonly around 4,000–6,000 m·s⁻¹

Varies with composition and structure.

Worked Example

Problem

An isotropic solid has shear modulus 30 GPa and density 7,500 kg·m⁻³. Calculate its shear-wave velocity.

Solution

  • Use vS = √(G/ρ).

  • G = 30 GPa = 3.0 × 10¹⁰ Pa.

  • ρ = 7,500 kg·m⁻³.

  • vS = √[(3.0 × 10¹⁰)/7,500] m·s⁻¹.

  • vS = √(4.0 × 10⁶) m·s⁻¹.

  • vS = 2,000 m·s⁻¹.

Answer

The shear-wave velocity is 2,000 m·s⁻¹.

Measurement Methods

  • Ultrasonic pulse-echo methods measure wave travel times through a specimen.

  • Through-transmission methods determine wave velocity from propagation time between transducers.

  • Resonant ultrasound spectroscopy determines elastic properties from resonance frequencies.

  • Seismic methods estimate wave velocities and elastic properties within geological structures.

  • Laser ultrasonics can generate and detect elastic waves without direct mechanical contact.

Conditions And Limitations

  • The simple velocity–modulus relation assumes an appropriate linear-elastic continuum model.

  • Different wave modes require different elastic moduli.

  • Anisotropic materials require direction-dependent wave equations.

  • Wave velocity can depend on temperature, pressure, frequency, porosity, cracks, and microstructure.

  • Viscoelastic materials can exhibit attenuation and frequency-dependent wave speeds.

  • A measured wave velocity alone may not uniquely determine every elastic constant; additional measurements or assumptions may be required.

Common Misconceptions

  • Longitudinal and shear wave velocities are not generally equal.

  • A higher wave velocity often indicates greater stiffness relative to density, not necessarily greater strength.

  • Bulk shear waves do not propagate through an ideal inviscid fluid because it has no static shear modulus.

  • Acoustic velocity is not a universal constant; it depends on the medium and its state.

Related Topics

  • Elastic Moduli of Materials

  • Poisson's Ratio

  • Material Density and Specific Volume

  • Thermal Conductivity of Materials

  • Ultrasonic Testing

Sources and verification

Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.

  • Auld — Acoustic Fields and Waves in Solids.
  • Graff — Wave Motion in Elastic Solids.
  • Kinsler et al. — Fundamentals of Acoustics.

Suggest a correction or source · More in Physical Constants