The International System of Units, abbreviated SI, provides a coherent and internationally standardized system for expressing physical quantities. It allows measurements made in different laboratories, countries and historical periods to be compared and reproduced. The SI is maintained through international metrology organizations and implemented by national measurement institutes.
The SI contains seven base units: metre (m), kilogram (kg), second (s), ampere (A), kelvin (K), mole (mol) and candela (cd). These units are used to express all other SI units, including derived units such as the newton, joule, pascal, watt and coulomb.
The modern SI is defined by assigning exact numerical values to seven defining constants:
1. Caesium-133 hyperfine transition frequency, ΔνCs = 9,192,631,770 Hz, defining the second.
2. Speed of light in vacuum, c = 299,792,458 m·s⁻¹, defining the metre through the second.
3. Planck constant, h = 6.62607015 × 10⁻³⁴ J·s, defining the kilogram.
4. Elementary charge, e = 1.602176634 × 10⁻¹⁹ C, defining the ampere.
5. Boltzmann constant, kB = 1.380649 × 10⁻²³ J·K⁻¹, defining the kelvin.
6. Avogadro constant, NA = 6.02214076 × 10²³ mol⁻¹, defining the mole.
7. Luminous efficacy of monochromatic radiation at 540 × 10¹² Hz, Kcd = 683 lm·W⁻¹, defining the candela.
These constants have exact numerical values in the SI. This does not mean that every physical quantity derived from them is known without uncertainty. Measurements of other quantities, such as the Newtonian gravitational constant, still have experimental uncertainty.
Derived SI units are combinations of base units. For example, force is measured in newtons, where 1 N = 1 kg·m·s⁻². Energy is measured in joules, where 1 J = 1 kg·m²·s⁻². Electrical resistance is measured in ohms, where 1 Ω = 1 kg·m²·s⁻³·A⁻².
A coherent SI system ensures that derived units follow directly from the definitions of the base units without additional numerical conversion factors. Prefixes such as kilo-, milli-, micro- and nano- represent powers of ten and make very large or very small quantities convenient to express.
The SI Brochure, published by the International Bureau of Weights and Measures (BIPM), provides the authoritative description of SI definitions, symbols, prefixes and usage rules. National metrology institutes maintain practical realization methods so that SI units can be reproduced with suitable accuracy.
International System of Units and Physical Constants
The International System of Units (SI) is the internationally agreed framework for expressing measurements consistently across science, engineering, industry and technology. Since the 2019 SI revision, seven defining constants establish the SI system, connecting measurement units to invariant properties of nature rather than physical artefacts.
Examples of SI unit relationships:
1 N = 1 kg·m·s⁻²
1 J = 1 kg·m²·s⁻²
1 W = 1 kg·m²·s⁻³
1 C = 1 A·s
1 Pa = 1 kg·m⁻¹·s⁻²
The seven defining constants establish the SI through their exact assigned numerical values.
Explanation
Variables
| Symbol | Meaning | Si Unit |
|---|---|---|
ΔνCs | Caesium-133 hyperfine transition frequency | Hz |
c | Speed of light in vacuum | m·s⁻¹ |
h | Planck constant | J·s |
e | Elementary charge | C |
kB | Boltzmann constant | J·K⁻¹ |
NA | Avogadro constant | mol⁻¹ |
Kcd | Luminous efficacy of monochromatic radiation at the specified frequency | lm·W⁻¹ |
Example or application
A worked example has not yet been added.
Definition
The International System of Units is the globally accepted measurement system whose seven base units are defined by fixing the numerical values of seven fundamental defining constants.
Purpose
To provide a consistent, reproducible and internationally understood framework for defining, measuring and communicating physical quantities.
Importance
The SI connects scientific measurements worldwide and provides the foundation for experimental physics, chemistry, engineering, manufacturing, international trade and technological development. Defining units through constants also makes the measurement system independent of individual physical artefacts.
Historical Development
The metric system developed during the late eighteenth century as an attempt to establish a rational measurement system. The Metre Convention of 1875 created an international framework for measurement cooperation. The SI was formally established in 1960. In 2019, its definitions were revised so that all seven base units became linked to exact numerical values of defining constants.
Seven Base Units
| Quantity | Unit | Symbol | Defining Basis |
|---|---|---|---|
Time | second | s | Caesium-133 hyperfine transition frequency |
Length | metre | m | Speed of light in vacuum |
Mass | kilogram | kg | Planck constant |
Electric current | ampere | A | Elementary charge |
Thermodynamic temperature | kelvin | K | Boltzmann constant |
Amount of substance | mole | mol | Avogadro constant |
Luminous intensity | candela | cd | Luminous efficacy constant Kcd |
Measurement Principles
Traceability: a measurement result should be connected to recognized references through a documented, unbroken chain of calibrations, each contributing to measurement uncertainty.
Realization: a unit definition must be translated into a practical experimental procedure or measurement system.
Coherence: derived units should be expressible as products of powers of SI base units without additional conversion factors.
Reproducibility: measurement procedures and reference standards should allow independent laboratories to obtain comparable results.
Uncertainty evaluation: every practical measurement has an associated uncertainty, even when the unit itself is defined exactly.
Derived Unit Examples
| Quantity | Unit | Relationship |
|---|---|---|
Force | newton (N) | kg·m·s⁻² |
Energy | joule (J) | kg·m²·s⁻² |
Pressure | pascal (Pa) | kg·m⁻¹·s⁻² |
Power | watt (W) | kg·m²·s⁻³ |
Electric charge | coulomb (C) | A·s |
Worked Example
Problem
Express a force of 2500 millinewtons in newtons and in SI base units.
Solution
The prefix milli- represents 10⁻³.
Therefore, 2500 mN = 2500 × 10⁻³ N = 2.5 N.
Since 1 N = 1 kg·m·s⁻², the force is also 2.5 kg·m·s⁻².
Result
2.5 N = 2.5 kg·m·s⁻²
Common Misconceptions
The seven SI base units are not seven unrelated standards; they form a coherent system connected through defining constants.
An exact SI definition does not make every practical measurement exact.
Not every physical constant is a defining constant of the SI.
The kilogram is no longer defined by the mass of a particular metal cylinder.
SI prefixes are powers of ten, but they do not change the underlying physical dimension of a quantity.
Limitations And Considerations
Practical realization of a unit requires instruments, experimental procedures and uncertainty evaluation.
Different realization methods may produce results with different uncertainties.
The SI is a measurement framework, not a complete physical theory.
Some scientific communities use non-SI units alongside SI units, but conversions must be handled carefully.
Applications
Calibration of scientific instruments and laboratory equipment.
International comparison of experimental results.
Engineering design and industrial quality control.
Medical measurements and pharmaceutical manufacturing.
Satellite navigation, telecommunications and precision timing.
Fundamental research in physics, chemistry and materials science.
Related Topics
SCI-REF-002-001
SCI-REF-002-009
SCI-REF-002-010
SCI-REF-002-011
SCI-REF-002-013
SCI-REF-002-014
Sources and verification
Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.
- BIPM — The International System of Units (SI Brochure), 9th edition.
- JCGM 200 — International Vocabulary of Metrology (VIM).
- Taylor, B. N. and Thompson, A. — Guide for the Use of the International System of Units (NIST Special Publication 811).