✦ScienexySCIENCE KNOWLEDGE LIBRARY
reference · SCI-REF-002-093

Time-Dependent and Environment-Dependent Physical Properties

Time-dependent and environment-dependent physical properties are quantities whose values change with time, temperature, pressure, humidity, electric or magnetic fields, radiation, composition, structural condition or other environmental influences. They must be distinguished from invariant fundamental constants and reported with their relevant conditions.

General representation:

P = P(t, T, p, H, E, f, c₁, c₂, ...)

where P is the property and the arguments represent relevant time, temperature, pressure, fields, frequency and composition variables.

For a small temperature interval, a first-order approximation may be:

P(T) ≈ P(T₀) + (∂P/∂T)₍T₀₎(T − T₀)

This linear approximation is valid only over a range where higher-order effects are negligible.

Explanation

Not every quantity commonly called a physical constant has a value that remains unchanged under all circumstances. Many quantities used in scientific equations are properties of materials, systems or environments. Their values may change when the physical state or external conditions change.

A fundamental constant such as the speed of light in vacuum has a fixed value in the SI definition. By contrast, the electrical resistance of a metal, refractive index of a material, thermal conductivity of a crystal and viscosity of a fluid depend on the physical state and measurement conditions.

Temperature is one of the most important environmental variables. Electrical resistivity in metals commonly increases with temperature over ordinary temperature ranges, while semiconductor conductivity can change strongly because temperature affects the number of mobile charge carriers. Thermal conductivity, heat capacity, viscosity, diffusion coefficients and refractive indices may also vary with temperature.

Pressure influences density, phase stability, compressibility, sound velocity and many transport properties. For gases, pressure and temperature jointly determine density under an appropriate equation of state. In solids, high pressure may alter crystal structures and therefore change elastic, electrical and optical properties.

Humidity and chemical composition can influence the behavior of porous materials, polymers, atmospheric gases and biological substances. Water absorption may change mass, dimensions, dielectric properties, thermal conductivity and mechanical strength.

External electric and magnetic fields can modify polarization, magnetization, conductivity and optical response. Strong fields may produce nonlinear effects in materials that behave approximately linearly under weak fields.

Time dependence may arise from aging, fatigue, creep, diffusion, chemical reactions, corrosion, radiation damage, phase transformations, relaxation processes or gradual changes in microstructure. A material's measured property may therefore depend on its history as well as its current temperature or pressure.

Many material properties are anisotropic, meaning that their values depend on direction. Single crystals, layered materials, composites and textured materials may conduct heat or electricity differently along different axes. Such properties require tensor descriptions rather than a single scalar value.

A useful scientific description therefore treats a property as a function of relevant variables. For example, thermal conductivity may be represented as k(T, P, direction, composition), while electrical resistivity may depend on temperature, magnetic field, strain and material structure.

Measurements should specify reference conditions and relevant environmental parameters. When a property changes rapidly with temperature or frequency, the measurement method must also specify the rate of change, measurement timescale or frequency range. Without this information, values from different experiments may not be directly comparable.

Variables

SymbolMeaningSi Unit

P

Physical property being described

Depends on the property

t

Time

s

T

Temperature

K

p

Pressure

Pa

E

Electric field strength

V·m⁻¹

H

Magnetic field strength

A·m⁻¹

f

Frequency

Hz

cᵢ

Composition or concentration variables

Depends on the composition quantity

Example or application

A worked example has not yet been added.

Definition

A time-dependent or environment-dependent physical property is a measurable characteristic of a material or system whose value varies with time, environmental conditions, state variables, composition, structure or measurement conditions.

Purpose

To explain why many scientific reference values depend on environmental and temporal conditions and to establish how such values should be measured, interpreted and reported.

Importance

Condition-dependent properties are essential for realistic scientific calculations. Using a value measured at one temperature, pressure or frequency in a different environment can produce substantial errors in physical models, engineering designs and experimental predictions.

Major Environmental Dependencies

FactorPhysical InfluenceAffected Properties

Temperature

Changes thermal motion, carrier populations, molecular interactions, phase stability and material dimensions.

  • Electrical resistivity

  • Thermal conductivity

  • Specific heat capacity

  • Viscosity

  • Diffusion coefficient

  • Refractive index

  • Density

Pressure

Changes molecular spacing, compressibility, phase equilibria and structural stability.

  • Density

  • Sound velocity

  • Compressibility

  • Viscosity

  • Optical properties

  • Diffusion coefficients

Humidity

Changes water content, molecular interactions, adsorption and ionic transport.

  • Mass

  • Electrical resistance

  • Dielectric response

  • Mechanical strength

  • Thermal conductivity

Electric and magnetic fields

Modify polarization, magnetization, charge transport and optical response.

  • Permittivity

  • Permeability

  • Electrical conductivity

  • Magnetoresistance

  • Optical response

Frequency

Changes the response of systems that cannot follow external oscillations instantaneously.

  • Complex permittivity

  • Complex permeability

  • Refractive index

  • Mechanical loss

  • Electrical impedance

Time and material history

Changes properties through aging, relaxation, creep, fatigue, diffusion and chemical degradation.

  • Elastic modulus

  • Electrical resistance

  • Mechanical strength

  • Diffusion behavior

  • Chemical reactivity

Time Dependent Mechanisms

MechanismDescription

Creep

Gradual deformation of a material under sustained stress, often strongly influenced by temperature and time.

Stress relaxation

Decrease in stress over time when a material is held at approximately constant deformation.

Aging

Gradual changes in material properties caused by physical or chemical evolution.

Fatigue

Progressive degradation under repeated or fluctuating loading.

Diffusion

Time-dependent transport of particles driven by concentration gradients and other thermodynamic forces.

Radiation damage

Changes in material structure and properties caused by exposure to ionizing or energetic radiation.

Scalar And Tensor Properties

A scalar property has one value at a specified state and condition. A tensor property may have different responses along different directions or under different combinations of applied fields and gradients. For example, thermal conductivity in an anisotropic crystal is represented by a second-rank tensor, and heat flux depends on the direction of the temperature gradient relative to the material axes.

Reference Condition Reporting

A reported material property should identify the material composition and state, temperature, pressure, humidity where relevant, measurement frequency, field strength, direction, sample preparation and measurement method. Not every property requires every condition, but all influential variables should be specified. A value without its essential conditions may be incomplete or misleading.

Worked Example

Problem

A material has electrical resistance R₀ = 100 Ω at 20 °C. Its temperature coefficient of resistance is α = 0.004 K⁻¹ near that temperature. Estimate its resistance at 30 °C using a linear approximation.

Solution

  • Use R(T) ≈ R₀[1 + α(T − T₀)].

  • The temperature difference is 30 − 20 = 10 K.

  • Substitute: R = 100[1 + (0.004 × 10)].

  • R = 100 × 1.04 = 104 Ω.

Result

Estimated resistance at 30 °C = 104 Ω. This is a local linear approximation and may not describe the material accurately over a large temperature range.

Practical Reporting Checklist

  • Identify whether the quantity is a universal constant or a condition-dependent property.

  • Specify the material or system being measured.

  • Record temperature and pressure.

  • State relevant frequency, field strength and direction.

  • Document sample composition and physical state.

  • Record measurement time or material history when time dependence matters.

  • Provide uncertainty and calibration information.

  • Avoid comparing values obtained under substantially different conditions without appropriate corrections.

Common Misconceptions

  • A material property called a constant is not necessarily universal or invariant.

  • A value measured at room temperature cannot automatically be applied at very high or low temperatures.

  • Environmental dependence is not always linear.

  • A material can have different properties in different directions.

  • Time-dependent behavior can occur even when external conditions appear unchanged.

  • Two values reported with the same unit are not necessarily comparable unless their measurement conditions are compatible.

Limitations And Considerations

  • A simple function of temperature or pressure may not capture all relevant physical dependencies.

  • Near phase transitions, material properties can change sharply and linear approximations may fail.

  • Material history and microstructure may be difficult to characterize completely.

  • Environmental effects can interact, so changing two conditions simultaneously may produce non-additive effects.

  • Different measurement methods may probe different timescales or spatial scales.

Applications

  • Temperature compensation in electronic circuits.

  • Design of materials for extreme environments.

  • Climate and atmospheric modeling.

  • Thermal management and heat-transfer engineering.

  • Optical and electrical device characterization.

  • Long-term reliability and material aging studies.

  • Scientific reference tables and reproducible experiments.

Related Topics

  • SCI-REF-002-071

  • SCI-REF-002-074

  • SCI-REF-002-077

  • SCI-REF-002-079

  • SCI-REF-002-081

  • SCI-REF-002-082

  • SCI-REF-002-090

  • SCI-REF-002-094

Sources and verification

Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.

  • Callister, W. D. and Rethwisch, D. G. — Materials Science and Engineering: An Introduction.
  • Ashby, M. F. and Jones, D. R. H. — Engineering Materials.
  • JCGM 200 — International Vocabulary of Metrology (VIM).

Suggest a correction or source · More in Physical Constants