✦ScienexySCIENCE KNOWLEDGE LIBRARY
reference · SCI-REF-003-012

Historical Measurement Systems: CGS, MKS and FPS

The CGS, MKS and FPS systems are historically important systems of measurement developed to standardize the expression of physical quantities. They differ primarily in their selected mechanical base units: centimetre, gram and second in CGS; metre, kilogram and second in MKS; and foot, pound and second in FPS. Their differences influence the numerical values and practical forms of derived units such as force, energy, pressure and power. Understanding these systems explains the historical development of modern measurement, the transition toward international standardization and the importance of unit conversion.

Cgs

Base Units

  • centimetre (cm)

  • gram (g)

  • second (s)

Velocity

cm·s⁻¹

Acceleration

cm·s⁻²

Force

1 dyn = 1 g·cm·s⁻²

Energy

1 erg = 1 dyn·cm = 1 g·cm²·s⁻²

Pressure

dyn·cm⁻²

Mks

Base Units

  • metre (m)

  • kilogram (kg)

  • second (s)

Velocity

m·s⁻¹

Acceleration

m·s⁻²

Force

1 N = 1 kg·m·s⁻²

Energy

1 J = 1 N·m = 1 kg·m²·s⁻²

Pressure

1 Pa = 1 N·m⁻²

Fps

Common Units

  • foot (ft)

  • pound-mass (lbm) or a specified mass unit

  • second (s)

Absolute Force

F = m·a/g_c when lbm, ft, s and lbf are combined

Gravitational Force

1 lbf = 1 slug·ft·s⁻²

Slug Definition

1 slug = 1 lbf·s²·ft⁻¹

Conversions

  • 1 m = 100 cm

  • 1 kg = 1000 g

  • 1 ft = 0.3048 m

  • 1 lb = 0.45359237 kg

  • 1 N = 10⁵ dyn

  • 1 J = 10⁷ erg

  • 1 Pa = 10 dyn·cm⁻²

  • 1 lbf ≈ 4.4482216152605 N

Explanation

HeadingContent

1. Historical Background of Mechanical Unit Systems

Before internationally coordinated measurement systems became established, different regions and scientific communities used different units for length, mass, time and other quantities. Units were frequently based on human body dimensions, local practices, commercial requirements or traditional standards. This diversity created difficulties in scientific communication, engineering calculations and international trade. During the development of modern physics, scientists increasingly required systematic units that could be related through mathematical definitions. The centimetre-gram-second system emerged during the nineteenth century as a coherent mechanical system. The metre-kilogram-second system developed as another metric framework and became especially influential in engineering and applied science. The foot-pound-second system remained important in countries and industries that historically used customary British measurement units. These systems formed important stages in the development of modern metrology and helped establish the foundations from which the SI system evolved.

2. The CGS System

CGS stands for centimetre-gram-second. Its three principal mechanical base units are the centimetre (cm) for length, the gram (g) for mass and the second (s) for time. The system was developed in the nineteenth century and became widely used in classical physics, particularly in mechanics, electromagnetism and laboratory research. Its relatively small units were convenient for expressing measurements involving small objects and laboratory-scale phenomena. Derived units include the dyne for force and the erg for energy. In electromagnetic theory, several related CGS formulations developed, including electrostatic, electromagnetic and Gaussian conventions. These formulations use different conventions for electromagnetic quantities and equations, so the term CGS does not always identify one unique electromagnetic unit convention.

3. The MKS System

MKS stands for metre-kilogram-second. Its principal mechanical base units are the metre (m), kilogram (kg) and second (s). Compared with CGS, MKS uses a larger length unit and a larger mass unit, making it convenient for many macroscopic engineering and physical applications. Its coherent mechanical derived units include the newton for force, the joule for energy and the pascal for pressure. The MKS framework played an important role in the development of practical engineering measurement and modern metric standardization. The later MKSA formulation added the ampere as an electrical base unit and contributed directly to the development of the modern SI structure. MKS is therefore an important historical foundation of SI, although the complete SI system contains seven base quantities rather than only the three mechanical quantities.

4. The FPS System

FPS stands for foot-pound-second. It is a family of systems based on the foot for length, the pound for mass or force depending on the formulation, and the second for time. The distinction between pound-mass and pound-force is essential. In an absolute FPS formulation, pound-mass is used as the mass unit and force is derived from mass and acceleration. In gravitational FPS formulations, pound-force may be treated as the force unit, with a corresponding mass unit or conversion constant required in the equations. FPS has historically been used in British and American engineering, construction, mechanics and technical documentation. The system is not a single universally uniform formulation: different FPS conventions must be identified before interpreting equations or converting quantities.

5. Base Units and Derived Units in CGS

The principal mechanical base units of CGS are centimetre, gram and second. From these units, derived mechanical units are constructed using the definitions of physical quantities. Velocity is expressed in centimetres per second (cm/s), acceleration in centimetres per second squared (cm/s²), force in dynes, work and energy in ergs, and pressure in dynes per square centimetre (dyn/cm²). The dyne is defined as the force that gives a mass of one gram an acceleration of one centimetre per second squared. One dyne is equal to 10⁻⁵ newton. The erg is the work done when a force of one dyne acts through a displacement of one centimetre. One erg is equal to 10⁻⁷ joule.

6. Base Units and Derived Units in MKS

The principal mechanical base units of MKS are metre, kilogram and second. Its derived units include metre per second (m/s) for velocity, metre per second squared (m/s²) for acceleration, newton (N) for force, joule (J) for work and energy, pascal (Pa) for pressure and watt (W) for power. The newton is the force required to accelerate one kilogram by one metre per second squared. The joule is the work done when a force of one newton moves an object through one metre in the direction of the force. The MKS mechanical units are coherent because their derived forms follow directly from the definitions of the quantities without extra numerical conversion factors.

7. Base Units and Derived Units in FPS

FPS uses the foot and second as principal length and time units, while the mass and force conventions depend on the specific formulation. In an absolute FPS system, mass may be expressed in pound-mass (lbm), and force is derived using Newton's second law. In a gravitational FPS system, pound-force (lbf) is commonly used as a force unit, and mass may be expressed in slugs. A slug is the mass that accelerates at one foot per second squared under a force of one pound-force. Thus, 1 lbf = 1 slug·ft/s². In the absolute pound-mass formulation, the conversion constant g_c is required when pound-mass, pound-force and foot-pound-second units are combined in force equations. The exact unit conventions must always be stated.

8. Comparison of the Three Systems

CGS, MKS and FPS differ in their base-unit selections and consequently in the numerical values of their derived units. CGS is based on centimetre, gram and second; MKS on metre, kilogram and second; and FPS on foot, a specified pound convention and second. For the same physical force, the numerical value in dynes is much larger than the numerical value in newtons because a dyne is much smaller than a newton. FPS introduces an additional interpretive issue because pound can refer to mass or force. These differences make clear unit labels and conversion factors essential when combining measurements from historical sources or different engineering traditions.

9. Important Conversion Relationships

The principal exact relationships include 1 m = 100 cm, 1 kg = 1000 g, 1 ft = 0.3048 m and 1 lb avoirdupois = 0.45359237 kg. Derived mechanical conversions include 1 N = 10⁵ dyn, 1 J = 10⁷ erg and 1 Pa = 10 dyn/cm². The relationship between pound-force and newton is approximately 1 lbf = 4.4482216152605 N. These conversions allow historical measurements and engineering values to be translated into SI. When converting derived quantities, all relevant base-unit factors must be considered rather than converting only one part of the unit expression.

10. Historical Importance and Transition Toward SI

The CGS and MKS systems contributed to the development of coherent metric measurement, while FPS remained influential in customary engineering practice. As science became increasingly international, the coexistence of multiple systems created difficulties in communication, education, industrial production and technical documentation. The development of the metre-kilogram-second framework, electrical standardization and international metric agreements eventually led to the International System of Units. SI retains the coherent mathematical structure of metric systems while providing internationally agreed definitions, seven base units, derived units and standardized conventions. Historical systems remain relevant when reading older physics literature, interpreting engineering documents and understanding the evolution of scientific measurement.

11. Variants and Important Terminological Distinctions

CGS is not a single complete electromagnetic convention. Its electromagnetic variants include electrostatic CGS (ESU), electromagnetic CGS (EMU) and Gaussian CGS. Their treatment of electric charge, current, electric and magnetic fields differs, so equations from one convention must not be transferred blindly into another. Similarly, FPS must be distinguished into absolute and gravitational formulations. The word pound may mean pound-mass or pound-force, and these are not interchangeable. The MKS mechanical system should also be distinguished from MKSA, which includes the ampere as an electrical base unit. These distinctions are essential for interpreting historical equations accurately.

12. Limitations of Historical Systems

The coexistence of different systems can create conversion errors and ambiguity. CGS units may be inconvenient for large-scale engineering calculations, while some CGS electromagnetic formulations use equations that differ in their numerical constants from SI formulations. MKS alone does not provide the complete modern SI framework. FPS conventions can be particularly confusing because pound may represent mass or force, and gravitational formulations require careful treatment of conversion constants. These limitations encouraged the development and adoption of a single internationally coordinated system.

Variables

SymbolNameUnitMeaning

F

Force

System-dependent

A physical interaction that can change an object's motion; expressed in dynes, newtons or pound-force depending on the system.

m

Mass

g, kg, lbm or slug

A measure of inertia.

a

Acceleration

cm·s⁻², m·s⁻² or ft·s⁻²

Rate of change of velocity.

g_c

FPS force-mass conversion constant

lbm·ft/(lbf·s²)

A conversion constant used in FPS equations when pound-mass and pound-force are combined.

dyn

Dyne

g·cm·s⁻²

The CGS derived unit of force.

erg

Erg

dyn·cm

The CGS derived unit of work and energy.

N

Newton

kg·m·s⁻²

The MKS and SI derived unit of force.

J

Joule

N·m

The MKS and SI derived unit of work and energy.

Example or application

A worked example has not yet been added.

Definition

CGS, MKS and FPS are historical systems of measurement distinguished by their principal mechanical base-unit choices: centimetre-gram-second, metre-kilogram-second and foot-pound-second, respectively.

Purpose

To explain the historical development, structures, differences, derived units and conversion relationships of CGS, MKS and FPS, and to establish the background needed to interpret older scientific and engineering measurements.

Importance

  • Explains the historical evolution of standardized measurement.

  • Provides context for the development of the modern SI system.

  • Helps interpret scientific literature written before widespread SI adoption.

  • Supports conversion of historical experimental data into SI.

  • Clarifies the difference between mass and force units in FPS.

  • Explains the historical use of dyne, erg and other non-SI units.

  • Helps identify different electromagnetic unit conventions in CGS literature.

  • Prevents errors when combining data from different measurement systems.

Worked Example

ProblemGivenSolutionResult

Convert a force of 500 dyn into newtons.

  • F = 500 dyn

  • 1 dyn = 10⁻⁵ N

  • F = 500 × 10⁻⁵ N

  • F = 5 × 10⁻³ N

500 dyn = 0.005 N.

Convert 250 erg into joules.

  • E = 250 erg

  • 1 erg = 10⁻⁷ J

  • E = 250 × 10⁻⁷ J

  • E = 2.5 × 10⁻⁵ J

250 erg = 0.000025 J.

Convert a length of 12 ft into metres.

  • L = 12 ft

  • 1 ft = 0.3048 m exactly

  • L = 12 × 0.3048 m

  • L = 3.6576 m

12 ft = 3.6576 m.

Determine the force acting on a 2 kg object accelerating at 3 m/s².

  • m = 2 kg

  • a = 3 m/s²

  • F = ma

  • F = 2 × 3

  • F = 6 kg·m/s²

F = 6 N.

Comparison

FeatureLength UnitMass UnitTime UnitForce UnitEnergy UnitHistorical Use

CGS

Centimetre

Gram

Second

Dyne

Erg

Classical physics and laboratory research.

MKS

Metre

Kilogram

Second

Newton

Joule

Engineering and metric mechanics.

FPS

Foot

Pound-mass or slug depending on formulation

Second

Pound-force in gravitational engineering formulations

Foot-pound-force

British and American customary engineering.

Applications

FieldApplication

Historical Physics

Understanding classical experiments and equations originally expressed in CGS units.

Engineering History

Interpreting older mechanical design calculations and technical specifications using FPS or MKS.

Electromagnetism

Understanding historical CGS electromagnetic formulations and their differences from SI.

Unit Conversion

Translating historical measurements into SI for modern calculations and comparison.

Technical Education

Explaining why the modern international measurement system was developed.

Common Errors

MisconceptionCorrection

The pound is always a unit of mass.

Pound-mass and pound-force are different quantities. The intended meaning must be stated.

CGS and MKS use the same numerical values for derived units.

Their base units differ, so derived-unit magnitudes differ. One newton equals 10⁵ dynes.

All CGS electromagnetic equations have the same form.

ESU, EMU and Gaussian CGS use different conventions and must be distinguished.

FPS always uses pound-force as its base force unit.

FPS is a family of formulations. Absolute and gravitational versions treat mass and force differently.

MKS and SI are completely identical.

MKS describes a three-base-unit mechanical framework, whereas SI is a comprehensive system with seven base quantities and internationally defined units.

Learning Check

QuestionExpected Answer

What does CGS stand for?

Centimetre-gram-second.

What are the principal mechanical base units of MKS?

Metre, kilogram and second.

What does FPS stand for?

Foot-pound-second.

What is the CGS unit of force?

Dyne.

What is the CGS unit of energy?

Erg.

How many dynes are equal to one newton?

10⁵ dynes.

Why must pound-mass and pound-force be distinguished?

Mass and force are different physical quantities and have different dimensions.

Why is the MKS system historically important?

It helped establish the metric mechanical framework from which the modern SI system developed.

Reference

TitleOrganizationUrlRelevance

The International System of Units (SI Brochure), 9th Edition

BIPM

https://www.bipm.org/en/publications/si-brochure

Provides the modern international framework and relevant historical context for SI units.

NIST Guide to the SI

National Institute of Standards and Technology

https://www.nist.gov/pml/special-publication-811

Provides unit relationships, conversion guidance and information on non-SI units.

The International System of Units (SI), NIST Special Publication 330

National Institute of Standards and Technology

https://www.nist.gov/pml/special-publication-330

Explains the internationally standardized metric system and its unit structure.

A Dictionary of Units of Measurement

Russ Rowlett, University of North Carolina at Chapel Hill

https://www.ibiblio.org/units/

Historical and technical reference for measurement units and conversion relationships.

Related Topic

  • SCI-REF-003-011

  • SCI-REF-003-013

  • SCI-REF-003-016

  • SCI-REF-003-017

  • SCI-REF-003-018

Sources and verification

Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.

  • Source verification pending; check an authoritative textbook, university, standards body, or peer-reviewed source.

Suggest a correction or source · More in Units & Measurement