| Heading | Content |
|---|---|
1. Meaning of Absolute Systems | An absolute system of units treats mass as an independent base quantity and defines force through Newton's second law, F = ma. In such a system, the force unit is derived from the mass, length and time units. The CGS and MKS mechanical systems are examples of absolute systems. Their force units are dyne and newton, respectively. The defining relationship between mass and acceleration is direct, without requiring gravitational acceleration as a conversion factor. |
2. Meaning of Gravitational Systems | A gravitational system treats force, commonly the weight of a standard mass under specified gravitational conditions, as a fundamental mechanical unit. Mass is then expressed through force and acceleration, and gravitational acceleration enters the relationship. Historically, gravitational systems were used in engineering because forces and loads were often measured directly using balances, weights and force instruments. Examples include gravitational FPS formulations using pound-force and foot, and technical metric gravitational formulations using kilogram-force and metre. |
3. Mass and Force Are Different Quantities | Mass is a measure of inertia and has the SI base unit kilogram. Force is an interaction that changes motion and has the SI derived unit newton. Their dimensions differ: mass has dimension M, while force has dimension MLT⁻². Weight is a gravitational force acting on a body and is calculated using W = mg near a gravitational field. Mass remains the same when an object moves between locations, while its weight can change if gravitational acceleration changes. |
4. Absolute System: Force Derivation | In an absolute system, Newton's second law is expressed as F = ma. If mass is measured in kilograms and acceleration in metres per second squared, force is measured in newtons. If mass is measured in grams and acceleration in centimetres per second squared, force is measured in dynes. The force unit is therefore derived directly from the chosen base units. |
5. Gravitational System: Force as a Fundamental Unit | In a gravitational system, force is selected as a base unit. Mass is derived using the relationship m = F/a, where the acceleration convention and gravitational reference must be specified. For example, the kilogram-force is defined as the force equal to the weight of a one-kilogram mass under standard gravity. Standard gravity is exactly 9.80665 m·s⁻². Thus, 1 kgf = 9.80665 N. The kilogram-force is not an SI unit and must not be confused with the kilogram. |
6. The Gravitational Conversion Constant | In some engineering unit systems, especially absolute FPS formulations combining pound-mass and pound-force, a conversion constant g_c is introduced so that the numerical equation for force is dimensionally and numerically consistent. In common engineering notation, F = ma/g_c when F is expressed in pound-force, m in pound-mass and a in foot per second squared. The conventional value is approximately 32.174 lbm·ft/(lbf·s²). This constant is a unit-conversion factor, not a universal physical constant and not the local gravitational acceleration itself. |
7. The Slug in Gravitational FPS | The slug is a unit of mass used in the gravitational FPS system. It is defined so that a force of one pound-force produces an acceleration of one foot per second squared in a mass of one slug. Therefore, 1 lbf = 1 slug·ft·s⁻². One slug is approximately 32.174 pound-mass. The slug provides a coherent mass unit when the foot, second and pound-force are used in the gravitational FPS framework. |
8. Kilogram-Force and Related Units | The kilogram-force (kgf) is a non-SI unit of force equal to the weight of one kilogram under standard gravity. It is defined as exactly 9.80665 N. The gram-force (gf) is one-thousandth of a kilogram-force. The kilogram-force was historically used in engineering and practical force measurements, but it is not the same as kilogram, which is a unit of mass. Modern scientific and engineering calculations generally prefer the newton. |
9. Standard Gravity and Local Gravity | Standard acceleration due to gravity, g₀, is defined as exactly 9.80665 m·s⁻² for conventional calculations and unit definitions involving kilogram-force. It is not the same as the actual gravitational acceleration at every location. Local gravitational acceleration varies with latitude, altitude, geology and other factors. Weight calculated using actual local gravity may therefore differ slightly from a value calculated using standard gravity. |
10. Advantages and Historical Uses | Absolute systems provide direct mathematical relationships between mass, acceleration and force, making them especially suitable for fundamental physics. Gravitational systems were historically convenient in practical engineering because loads and forces were often specified in gravitational units. FPS engineering and metric gravitational systems were used in structural, mechanical and industrial calculations. The SI system, with kilogram as the base unit of mass and newton as the derived unit of force, provides a consistent framework that avoids many ambiguities of older gravitational conventions. |
11. Limitations and Sources of Error | Gravitational systems can create confusion because the same word may be used informally for different physical quantities. Kilogram and kilogram-force are not interchangeable. A gravitational unit can depend on a specified conventional value of gravitational acceleration, while actual local gravity varies. FPS equations may also require a conversion constant if pound-mass and pound-force are used together. Mixing absolute and gravitational conventions without identifying the unit system can lead to incorrect numerical results. |
12. Modern Preference for Absolute SI Mechanics | Modern SI mechanics uses mass as a base quantity and force as a derived quantity. The kilogram is the base unit of mass and the newton is the derived unit of force. This structure gives a direct relationship F = ma and avoids using kilogram-force in standard scientific equations. Gravitational units remain relevant in historical documents and some specialized practical contexts, but SI is preferred for scientific communication and modern engineering. |
Absolute and Gravitational Systems of Units
Absolute and gravitational systems of units are two approaches to organizing mechanical measurement, particularly the relationship between mass, force and acceleration. In an absolute system, mass is treated as a base quantity and force is derived from Newton's second law. In a gravitational system, force is selected as a fundamental mechanical quantity and mass is derived or related through gravitational acceleration. These approaches historically influenced engineering unit systems, especially FPS and technical gravitational systems. Understanding them is essential for distinguishing mass from weight, interpreting force equations and avoiding errors involving gravitational conversion constants.
Absolute System
Law
F = ma
Mks Force Unit
1 N = 1 kg·m·s⁻²
Cgs Force Unit
1 dyn = 1 g·cm·s⁻²
Gravitational System
Weight
W = mg
Mass
m = W/g
Kilogram Force
1 kgf = 9.80665 N exactly
Gram Force
1 gf = 0.00980665 N exactly
Slug
1 lbf = 1 slug·ft·s⁻²
Fps Conversion
F = ma/g_c
Standard Gravity
g₀ = 9.80665 m·s⁻² exactly
Explanation
Variables
| Symbol | Name | Unit | Meaning |
|---|---|---|---|
F | Force | N, dyn, lbf or kgf | An interaction that can change an object's motion. |
m | Mass | kg, g, lbm or slug | A measure of inertia. |
a | Acceleration | m·s⁻², cm·s⁻² or ft·s⁻² | Rate of change of velocity. |
W | Weight | N or lbf | Gravitational force acting on a body. |
g | Local gravitational acceleration | m·s⁻² | Acceleration due to gravity at a specified location. |
g₀ | Standard acceleration of gravity | m·s⁻² | The exactly defined conventional value 9.80665 m·s⁻². |
g_c | FPS conversion constant | lbm·ft/(lbf·s²) | A unit conversion factor used when combining pound-mass and pound-force in engineering equations. |
Example or application
A worked example has not yet been added.
Definition
An absolute system treats mass as a base mechanical quantity and derives force from F = ma, whereas a gravitational system treats force as a fundamental mechanical unit and defines mass through force and a specified acceleration relationship.
Purpose
To explain two historical approaches to organizing mechanical units and clarify how mass, force, weight and gravitational acceleration are related in different measurement conventions.
Importance
Clarifies the physical distinction between mass and force.
Explains why absolute systems derive force from mass and acceleration.
Explains why gravitational systems use force as a fundamental unit.
Prevents confusion between kilogram and kilogram-force.
Helps interpret older engineering and mechanical literature.
Explains the use of the slug and g_c in FPS calculations.
Provides context for the modern SI approach.
Worked Example
| Problem | Given | Solution | Result |
|---|---|---|---|
Calculate the weight of a 5 kg object under standard gravity. |
|
| Weight = 49.03325 N. |
Convert 10 kgf into newtons. |
|
| 10 kgf = 98.0665 N. |
Find the force required to accelerate a 3 kg mass at 4 m/s² in an absolute SI system. |
|
| 12 N. |
Find the mass in slugs corresponding approximately to 64.348 lbm. |
|
| Approximately 2 slugs. |
Comparison
| Feature | Absolute System | Gravitational System |
|---|---|---|
Fundamental mechanical quantity | Mass | Force |
Force | Derived using F = ma | Selected as a fundamental unit |
Mass | Base quantity | Derived or related to force through acceleration |
Gravity dependence | No gravitational conversion is required in F = ma | A specified gravitational acceleration convention is involved |
Examples | MKS and CGS mechanics | Gravitational FPS and technical gravitational metric systems |
Modern SI | Consistent with the SI mechanical structure | Not the SI approach |
Applications
| Field | Application |
|---|---|
Classical Mechanics | Using Newton's second law to relate mass, force and acceleration. |
Mechanical Engineering | Interpreting historical force and load calculations. |
Structural Engineering | Understanding legacy specifications expressed in kilogram-force or pound-force. |
Aerospace and Fluid Engineering | Interpreting FPS engineering equations and conversion constants. |
Metrology | Converting gravitational units into SI units. |
Common Errors
| Misconception | Correction |
|---|---|
Kilogram and kilogram-force are interchangeable. | Kilogram is a unit of mass; kilogram-force is a non-SI unit of force. |
Mass changes whenever gravity changes. | Mass remains constant for an object, while its weight changes with gravitational acceleration. |
Standard gravity is the exact local gravity everywhere. | Standard gravity is a defined conventional value; local gravity varies by location. |
The g_c constant is the same as local gravitational acceleration. | g_c is a unit-conversion constant, not a physical gravitational acceleration. |
A gravitational system and an absolute system differ only in unit size. | They differ in which mechanical quantity is treated as fundamental and how mass and force are related. |
Learning Check
| Question | Expected Answer |
|---|---|
What is the defining feature of an absolute mechanical system? | Mass is treated as a base quantity and force is derived using F = ma. |
What is the defining feature of a gravitational system? | Force is treated as a fundamental mechanical unit, and mass is related to force through acceleration. |
What is the SI unit of mass? | Kilogram. |
What is the SI unit of force? | Newton. |
What is one kilogram-force equal to? | Exactly 9.80665 newtons. |
What is a slug? | A mass unit in gravitational FPS defined so that one pound-force produces one foot per second squared of acceleration. |
Is g_c the same as gravitational acceleration? | No. It is a unit conversion constant. |
Why does weight vary while mass remains constant? | Weight depends on gravitational acceleration, whereas mass is a measure of inertia. |
Reference
| Title | Organization | Url | Relevance | Authors |
|---|---|---|---|---|
NIST Guide to the SI, Special Publication 811 | NIST | https://www.nist.gov/pml/special-publication-811 | Provides conversion guidance and treatment of non-SI units such as force units. | |
The International System of Units (SI Brochure), 9th Edition | BIPM | https://www.bipm.org/en/publications/si-brochure | Defines SI mass and force units and provides the modern framework for mechanical measurement. | |
Engineering Mechanics: Statics | Explains mass, force, weight and engineering unit systems. | Russell C. Hibbeler |
Related Topic
SCI-REF-003-012
SCI-REF-003-013
SCI-REF-003-016
SCI-REF-003-018
Sources and verification
Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.
- Source verification pending; check an authoritative textbook, university, standards body, or peer-reviewed source.
Suggest a correction or source · More in Units & Measurement