✦ScienexySCIENCE KNOWLEDGE LIBRARY
reference · SCI-REF-003-018

Practical and Conventional Units of Measurement

Practical and conventional units are units selected or retained because they are convenient, familiar or especially useful in particular scientific, industrial, commercial and everyday contexts. Some are non-SI units accepted for use alongside SI, while others are specialized units used in particular disciplines. Examples include litre, tonne, minute, hour, day, degree, electronvolt, astronomical unit and nautical mile. Their use requires clear definitions, appropriate conversion relationships and awareness of the distinction between practical convenience and SI coherence.

Common Conversions

  • 1 min = 60 s

  • 1 h = 3600 s

  • 1 d = 86 400 s

  • 1 L = 1 dm³ = 10⁻³ m³

  • 1 mL = 1 cm³ = 10⁻⁶ m³

  • 1 t = 1000 kg

  • 1° = π/180 rad

  • 1 au = 149 597 870 700 m exactly

  • 1 nmi = 1852 m exactly

  • 1 eV = 1.602176634 × 10⁻¹⁹ J exactly

  • 1 ha = 10⁴ m²

  • 1 bar = 10⁵ Pa

  • 1 b = 10⁻²⁸ m²

Special Relationships

  • 1 revolution = 360° = 2π rad

  • 1 kn = 1 nmi/h

  • 1 Da is defined as one-twelfth of the mass of a carbon-12 atom.

Explanation

HeadingContent

1. Meaning of Practical Units

A practical unit is a unit selected because it makes measurement, calculation, communication or everyday use convenient. It may be an SI unit, a multiple or submultiple of an SI unit, or a non-SI unit retained for historical or specialized reasons. For example, kilometre is a prefixed SI unit commonly used for road distances, while litre is a non-SI unit accepted for use with SI. Practicality depends on the scale and context of the quantity being measured.

2. Meaning of Conventional Units

A conventional unit is a unit whose value or use is established by agreement, accepted practice or a recognized standard. Some conventional units are defined exactly in terms of SI units. Examples include the minute, hour, day and degree. Other conventional units are used in specialized fields because of historical practice or practical suitability. The term conventional does not mean arbitrary or inaccurate; a conventional unit can have a precise definition.

3. SI Units and Accepted Non-SI Units

SI is the preferred international system, but the BIPM recognizes certain non-SI units for use with SI because of their practical importance. Examples include minute (min), hour (h), day (d), degree (°), litre (L or l), tonne (t), electronvolt (eV), dalton (Da), astronomical unit (au) and nautical mile (nmi). Their use should be appropriate to the field and clearly identified. Some units are accepted for use with SI without being SI units themselves.

4. Units of Time

The SI base unit of time is the second. The minute, hour and day are accepted non-SI units used widely in everyday life, science and scheduling. One minute equals 60 seconds, one hour equals 3600 seconds and one day is conventionally 86 400 seconds. Calendar days can differ in civil timekeeping due to time-zone and calendar conventions, and leap seconds have historically been introduced to keep Coordinated Universal Time aligned with Earth's rotation. The fixed conversion of 86 400 seconds refers to the conventional day unit.

5. Units of Volume and Capacity

The SI derived unit of volume is the cubic metre (m³). The litre is a non-SI unit accepted for use with SI and is commonly used for liquids, laboratory solutions and commercial products. One litre is exactly 1 dm³ or 10⁻³ m³. The millilitre is one-thousandth of a litre and equals one cubic centimetre. The litre is convenient for everyday and laboratory measurement, while cubic metres are often used for large volumes and engineering calculations.

6. Units of Mass and Large-Scale Quantities

The SI base unit of mass is the kilogram. The tonne, symbol t, is a non-SI unit accepted for use with SI and is exactly 1000 kg. It is convenient for measuring large masses such as vehicles, industrial materials, agricultural products and cargo. Smaller quantities may be expressed in grams and milligrams. The use of a suitable unit reduces numerical complexity while preserving clear conversion relationships.

7. Units of Plane Angle

The coherent SI derived unit of plane angle is the radian, symbol rad. The degree, symbol °, is a non-SI unit accepted for use with SI. One complete revolution is 360°, equivalent to 2π rad. The arcminute and arcsecond are subdivisions of the degree: 1° = 60′ and 1′ = 60″. Degrees are convenient in navigation, geometry, surveying and everyday angular measurement, while radians are especially useful in mathematical analysis and physics.

8. Electronvolt

The electronvolt, symbol eV, is a unit of energy used widely in atomic, nuclear and particle physics. It is defined as the energy gained by an elementary charge when it moves through a potential difference of one volt in magnitude. One electronvolt is exactly 1.602176634 × 10⁻¹⁹ joule. Multiples such as keV, MeV, GeV and TeV are used for increasingly high energy scales. The electronvolt is not an SI unit, but it is accepted for use with SI.

9. Astronomical Unit and Nautical Mile

The astronomical unit, symbol au, is a unit of length used in astronomy and is defined as exactly 149 597 870 700 metres. It is useful for expressing distances within the Solar System. The nautical mile is defined as exactly 1852 metres and is used in marine and air navigation. The knot, symbol kn, is a speed unit equal to one nautical mile per hour. These units remain useful because they align with the practical needs and conventions of their respective fields.

10. Specialized Conventional Units

Some units are retained for specialized measurement. The dalton (Da) is used for atomic and molecular masses and is defined as one-twelfth of the mass of a free carbon-12 atom in its ground state. The barn (b) is used in nuclear physics for cross-sectional areas and equals 10⁻²⁸ m². The hectare (ha) is used for land area and equals 10⁴ m². The bar is a pressure unit equal to 10⁵ Pa. Their usefulness depends on disciplinary convention and scale.

11. Advantages of Practical and Conventional Units

Practical and conventional units simplify communication in specialized fields, reduce unwieldy numerical values and preserve continuity with established professional practice. A litre is more convenient than 0.001 cubic metres for many liquid measurements, while electronvolts are convenient for microscopic energy scales. Astronomical units are more readable than expressing planetary distances in metres. Their use can improve communication when the audience understands the conventions and the unit is clearly defined.

12. Limitations and Risks

A large variety of units can create confusion, especially when similar names refer to different quantities or when customary units vary between countries. Some practical units are not coherent with SI and require conversion factors in equations. Units such as calorie, horsepower and inch may have different historical or technical definitions. A scientific document should identify the intended unit, use recognized definitions and provide SI equivalents when needed.

13. Choosing an Appropriate Unit

Unit selection should consider the magnitude of the quantity, the intended audience, the measurement purpose, the accepted conventions of the field and the need for compatibility with other data. SI should normally be preferred in scientific calculations and technical reporting. A practical non-SI unit may be included where it improves understanding, provided its definition is unambiguous and conversions are correct. Within one calculation, units must be made consistent before numerical operations are performed.

Variables

SymbolNameUnitMeaning

L

Litre

L

A unit of volume equal to one cubic decimetre.

t

Tonne

t

A unit of mass equal to 1000 kilograms.

eV

Electronvolt

eV

A unit of energy used in atomic and particle physics.

au

Astronomical unit

au

A unit of length used for Solar System distances.

nmi

Nautical mile

nmi

A unit of length used in marine and air navigation.

kn

Knot

kn

A speed equal to one nautical mile per hour.

Da

Dalton

Da

A unit used for atomic and molecular mass.

ha

Hectare

ha

A unit of area used especially for land measurement.

Example or application

A worked example has not yet been added.

Definition

Practical and conventional units are measurement units used because of convenience, historical continuity or disciplinary agreement, including certain non-SI units accepted for use alongside the SI system.

Purpose

To explain the role, definitions, conversions and appropriate uses of practical and conventional measurement units alongside the SI system.

Importance

  • Connects standardized measurement with everyday practice.

  • Supports specialized scientific and industrial communication.

  • Provides convenient units for very large and very small quantities.

  • Helps interpret historical and technical documents.

  • Enables correct conversion between conventional and SI units.

  • Clarifies which non-SI units are accepted for use with SI.

Worked Example

ProblemGivenSolutionResult

Convert 2.5 litres into cubic metres.

  • 1 L = 10⁻³ m³

  • Volume = 2.5 L

  • V = 2.5 × 10⁻³ m³

2.5 L = 0.0025 m³.

Convert 3 hours into seconds.

  • 1 h = 3600 s

  • Time = 3 h

  • t = 3 × 3600 s

  • t = 10 800 s

3 h = 10 800 s.

Convert 5 electronvolts into joules.

  • 1 eV = 1.602176634 × 10⁻¹⁹ J

  • E = 5 × 1.602176634 × 10⁻¹⁹ J

E = 8.01088317 × 10⁻¹⁹ J.

Convert 4 nautical miles into metres.

  • 1 nmi = 1852 m

  • d = 4 × 1852 m

  • d = 7408 m

4 nmi = 7408 m.

Comparison

UnitQuantityStatusSIEquivalent

Litre

Volume

Non-SI unit accepted for use with SI

10⁻³ m³

Tonne

Mass

Non-SI unit accepted for use with SI

1000 kg

Minute

Time

Non-SI unit accepted for use with SI

60 s

Degree

Plane angle

Non-SI unit accepted for use with SI

π/180 rad

Electronvolt

Energy

Non-SI unit accepted for use with SI

1.602176634 × 10⁻¹⁹ J

Astronomical unit

Length

Specialized non-SI unit

149 597 870 700 m

Nautical mile

Length

Non-SI unit accepted for use with SI

1852 m

Applications

FieldApplication

Everyday Measurement

Using minutes, hours, litres and tonnes for common measurements.

Chemistry

Using litres and millilitres for laboratory volumes and electronvolts in atomic contexts.

Astronomy

Expressing Solar System distances in astronomical units.

Navigation

Using nautical miles and knots for distances and speeds.

Nuclear Physics

Using barns for nuclear cross-sections and electronvolts for energy.

Agriculture

Using hectares for land area.

Industry

Using tonnes and bar in suitable material and pressure specifications.

Common Errors

MisconceptionCorrection

Every practical unit is an SI unit.

Some practical units are SI units or prefixed SI units, while others are non-SI units accepted for use with SI.

A litre is an SI base unit.

The SI unit of volume is cubic metre. Litre is a non-SI unit accepted for use with SI.

A tonne is the same as a ton in every country.

The tonne is exactly 1000 kg, while other ton units may have different values.

A knot is a unit of distance.

A knot is a unit of speed equal to one nautical mile per hour.

Electronvolt is a unit of electric potential.

Electronvolt is a unit of energy, not voltage.

All non-SI units have imprecise definitions.

Many non-SI units have exact internationally defined conversion relationships.

Learning Check

QuestionExpected Answer

What is a practical unit?

A unit selected because it is convenient for a particular measurement or application.

How many cubic metres are in one litre?

10⁻³ m³.

How many kilograms are in one tonne?

1000 kg.

What is the SI unit of volume?

Cubic metre (m³).

What is one electronvolt equal to?

Exactly 1.602176634 × 10⁻¹⁹ joule.

What is one nautical mile equal to?

Exactly 1852 metres.

What does a knot measure?

Speed.

Why should non-SI units be converted carefully?

Because their numerical values differ from SI units and incorrect conversion can cause measurement and calculation errors.

Reference

TitleOrganizationUrlRelevance

The International System of Units (SI Brochure), 9th Edition

BIPM

https://www.bipm.org/en/publications/si-brochure

Lists non-SI units accepted for use with SI and provides their definitions and conversion relationships.

NIST Guide to the SI, Special Publication 811

NIST

https://www.nist.gov/pml/special-publication-811

Provides practical conversion guidance and information about non-SI units.

The International System of Units (SI), NIST Special Publication 330

NIST

https://www.nist.gov/pml/special-publication-330

Describes SI and accepted non-SI units.

Related Topic

  • SCI-REF-003-013

  • SCI-REF-003-015

  • SCI-REF-003-019

  • SCI-REF-003-020

Sources and verification

Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.

  • Source verification pending; check an authoritative textbook, university, standards body, or peer-reviewed source.

Suggest a correction or source · More in Units & Measurement