Historical Development
Overview
The metre was introduced during the French Revolution as part of an effort to establish a universal, decimal-based measurement system independent of local traditions and arbitrary human references.
Early Earth Based Definition
The original metre was intended to equal one ten-millionth of the distance along Earth's meridian from the equator to the North Pole. A geodetic survey was conducted to estimate the meridian length, and a physical platinum metre bar was subsequently constructed as a practical representation.
International Prototype
In 1889, the first International Prototype of the Metre, made from a platinum-iridium alloy, was adopted as the international reference. Its length was defined by the distance between specified lines on the bar under prescribed conditions.
Wavelength Definition
In 1960, the metre was redefined using a specified number of wavelengths of a particular orange-red radiation emitted by krypton-86 atoms. Atomic radiation provided a more reproducible reference than a material bar.
Speed Of Light Definition
In 1983, the metre was redefined by fixing the speed of light in vacuum. This definition was retained in the revised SI adopted in 2018 and effective from 20 May 2019.
Modern Definition
Official Definition
The metre, symbol m, is the SI unit of length. It is defined by taking the fixed numerical value of the speed of light in vacuum, c, to be 299,792,458 when expressed in the unit m s⁻¹, where the second is defined in terms of the caesium frequency ΔνCs.
Defining Constant
Speed of light in vacuum, c = 299,792,458 m s⁻¹ exactly.
Meaning
The definition fixes the speed of light exactly. Since the second is independently defined, the metre is established through the distance light travels in a precisely specified fraction of a second.
Important Clarification
The metre is not defined as the distance light travels in one second. It is the distance light travels in 1/299,792,458 of a second in vacuum.
Physical Meaning
Length
Length describes the spatial extent or separation between positions. It may refer to the length of an object, a distance between two points, a wavelength, a radius, a height or a displacement magnitude.
Dimension
The dimension of length is represented by L.
Unit Role
The metre provides a common reference for expressing lengths at scales ranging from microscopic structures to astronomical distances.
Multiples And Submultiples
Large Units
| Name | Symbol | Conversion |
|---|---|---|
kilometre | km | 1 km = 10³ m |
hectometre | hm | 1 hm = 10² m |
decametre | dam | 1 dam = 10 m |
Small Units
| Name | Symbol | Conversion |
|---|---|---|
decimetre | dm | 1 dm = 10⁻¹ m |
centimetre | cm | 1 cm = 10⁻² m |
millimetre | mm | 1 mm = 10⁻³ m |
micrometre | µm | 1 µm = 10⁻⁶ m |
nanometre | nm | 1 nm = 10⁻⁹ m |
picometre | pm | 1 pm = 10⁻¹² m |
Other Common Units
| Name | Symbol | Conversion | Status |
|---|---|---|---|
ångström | Å | 1 Å = 10⁻¹⁰ m | Non-SI unit accepted for use in certain scientific fields; not an SI unit. |
astronomical unit | au | 1 au = 149,597,870,700 m exactly | Non-SI unit accepted for use with the SI. |
light-year | ly | Distance light travels in one Julian year in vacuum; approximately 9.461 × 10¹⁵ m. | Non-SI astronomical unit. |
parsec | pc | Approximately 3.086 × 10¹⁶ m. | Non-SI astronomical unit. |
Measurement Methods
Direct Methods
Ruler and measuring tape for ordinary dimensions.
Vernier caliper for external, internal and depth measurements.
Micrometer screw gauge for small thicknesses and diameters.
Coordinate measuring machines for complex three-dimensional geometries.
Indirect Methods
Optical interferometry using the wavelength of stabilized laser radiation.
Time-of-flight measurements using the known speed of light.
Triangulation and surveying for large distances.
Radar and laser ranging for remote distances.
Selection
The appropriate method depends on the length scale, required uncertainty, geometry, environmental conditions and the properties of the object being measured.
Realization
Principle
The metre can be realized by using the exact speed of light together with a realization of the second, or by using optical frequency and wavelength measurements traceable to the SI.
Interferometry
In optical interferometry, a known optical wavelength is used to determine displacement or length by counting interference fringes and accounting for the measurement geometry and refractive index of the medium.
Frequency Based Methods
Frequency-stabilized lasers and optical frequency combs enable precise links between optical frequencies and time-frequency standards.
Environmental Corrections
Measurements in air may require corrections for refractive index, temperature, pressure, humidity and carbon dioxide concentration. Thermal expansion of the measured object and instrument may also need correction.
Applications
Engineering design, construction and manufacturing.
Land surveying, mapping and geodesy.
Microscopy, nanotechnology and semiconductor fabrication.
Astronomy and space science.
Optical physics, spectroscopy and laser technology.
Medical imaging and biomedical instrumentation.
Quality control and industrial dimensional metrology.
Limitations And Considerations
The definition of the metre is exact, but an individual measurement always has uncertainty.
Instrument resolution, calibration, alignment, temperature and mechanical deformation can affect measurement results.
The refractive index of air changes the effective propagation speed and wavelength of light in air; the vacuum speed of light must not be confused with its speed in a material medium.
A result must identify the measured quantity and relevant measurement conditions, not merely state a numerical length.
Common Misconceptions
The metre is not currently defined by a metal bar.
The metre is not defined by Earth's circumference in the modern SI.
The speed of light in vacuum is exact by definition, but measured distances are not automatically uncertainty-free.
A centimetre is a decimal submultiple of the metre, not a separate SI base unit.