✦ScienexySCIENCE KNOWLEDGE LIBRARY
reference · SCI-REF-003-031

Coherent Derived Units and Their Formation

Coherent derived units are units formed from a system's base units without introducing additional numerical conversion factors. In the SI, coherent derived units are obtained by combining the seven base units according to the defining equations of physical quantities. Coherence makes scientific equations simpler, preserves numerical consistency and enables direct relationships between physical quantities and their units.

General

U(Q) = U₁ᵃ × U₂ᵇ × U₃ᶜ ...

Condition

The numerical coefficient introduced by the unit definition is exactly 1.

Examples

  • 1 N = 1 kg·m·s⁻²

  • 1 J = 1 kg·m²·s⁻²

  • 1 W = 1 kg·m²·s⁻³

  • 1 Pa = 1 kg·m⁻¹·s⁻²

  • 1 C = 1 A·s

  • 1 V = 1 kg·m²·s⁻³·A⁻¹

Explanation

HeadingContent

1. Meaning of a Coherent Unit

A unit is coherent within a system when it is formed from the system's base units through multiplication and division, with no additional numerical factor other than one. A coherent derived unit therefore follows directly from the defining relationship of its physical quantity.

2. Coherence in the SI

The SI is a coherent system of units. Its seven base units provide the foundation for all coherent derived units. For example, force is mass multiplied by acceleration. Since mass is measured in kilograms and acceleration in metres per second squared, the coherent SI unit of force is kg·m·s⁻², named the newton.

3. Mathematical Principle

If a derived quantity is defined by multiplying or dividing other quantities, its coherent unit is formed using the corresponding product or quotient of their coherent units. No additional conversion multiplier is needed. For example, work equals force multiplied by displacement, so its unit is N·m, which is the joule.

4. Formation Through Multiplication

When a quantity is the product of two quantities, their units are multiplied. Area = length × length, giving m². Momentum = mass × velocity, giving kg·m·s⁻¹. Work = force × displacement, giving N·m = J.

5. Formation Through Division

When a quantity is defined as a ratio, its unit is obtained by dividing the units of the numerator and denominator. Velocity = displacement/time gives m·s⁻¹. Pressure = force/area gives N·m⁻² = Pa. Density = mass/volume gives kg·m⁻³.

6. Formation Through Powers

Some quantities involve powers of physical quantities. For example, volume is the third power of length, so its unit is m³. Acceleration is velocity divided by time, resulting in m·s⁻². Energy per unit mass has unit J/kg = m²·s⁻².

7. Coherent Units With Special Names

Special names do not break coherence. The newton is defined as kg·m·s⁻², the joule as kg·m²·s⁻², and the watt as kg·m²·s⁻³. These named units are exact alternative expressions of coherent combinations of SI base units.

8. Coherent Units Without Special Names

Many coherent derived units are written directly in base-unit form. Examples include m/s, m/s², kg/m³, kg·m/s, m²/s and mol/m³. These units are just as valid as specially named units.

9. Non-Coherent Units

A non-coherent unit introduces a numerical factor when expressed in terms of the chosen base units. For example, the litre is equal to 10⁻³ m³, and the kilometre is equal to 10³ m. Such units can be convenient, but they are not coherent derived SI units formed solely through products and quotients of base units.

10. Coherence and Physical Equations

Coherence allows equations written in terms of quantities to retain simple numerical forms when coherent units are used. For example, F = ma requires no extra conversion coefficient when force, mass and acceleration are expressed in coherent SI units. Using non-coherent units may require explicit conversion factors.

11. Coherent Units and Dimensionless Quantities

Some derived quantities have dimension one because they are ratios of quantities with identical dimensions. Their coherent SI unit is one, symbol 1. The radian and steradian are special names used for plane angle and solid angle, respectively, but both are dimensionless in the SI.

12. Importance in Dimensional Analysis

Coherent units support dimensional analysis because each derived unit can be reduced to combinations of base dimensions. This allows equations to be checked for dimensional consistency and helps identify unit errors in calculations.

13. Limits of Coherence

Coherence is defined relative to a particular system and its selected base units. A unit can be coherent in one system but not another. Coherence also does not guarantee that a measurement is accurate, precise or traceable; these depend on instruments, methods, calibration and uncertainty evaluation.

Variables

SymbolMeaningSi Unit

U(Q)

Unit of the derived quantity Q

Depends on Q

U₁, U₂

Units of the component quantities

Depends on the quantities

a, b, c

Powers specifying how component units are combined

Dimensionless

Example or application

A worked example has not yet been added.

Definition

A coherent derived unit is a derived unit that can be expressed as a product or quotient of powers of the system's base units without an additional numerical factor other than one.

Purpose

To establish a mathematically consistent system in which derived units follow directly from base units without arbitrary conversion coefficients.

Importance

  • Simplifies physical equations.

  • Reduces unnecessary conversion factors.

  • Makes scientific calculations more systematic.

  • Supports dimensional analysis.

  • Improves consistency across scientific disciplines.

  • Enables direct comparison of measurements expressed in coherent SI units.

Worked Example

ProblemSolutionAnswer

Show that the joule is a coherent derived SI unit.

  • Work is defined as force multiplied by displacement.

  • The SI unit of force is N = kg·m·s⁻².

  • The SI unit of displacement is m.

  • Therefore, the unit of work is N·m.

  • Substituting the base-unit expression gives kg·m²·s⁻².

  • No additional numerical factor is required.

The joule, J = kg·m²·s⁻², is a coherent derived SI unit.

Determine whether the litre is a coherent SI derived unit.

  • The coherent SI unit of volume is m³.

  • One litre is exactly 10⁻³ m³.

  • The conversion introduces a numerical factor of 10⁻³.

The litre is accepted for use with the SI but is not a coherent SI derived unit.

Comparison

FeatureDescriptionExample

Coherent derived unit

Formed from base units without an additional numerical factor.

N = kg·m·s⁻²

Non-coherent unit

Requires a numerical conversion factor relative to the chosen coherent unit.

L = 10⁻³ m³

Named coherent unit

A coherent derived unit assigned a special name and symbol.

J = kg·m²·s⁻²

Unnamed coherent unit

A coherent derived unit written directly as a combination of base units.

m·s⁻¹

Common Errors

  • Assuming that every SI-accepted unit is coherent.

  • Assuming that a special unit name makes a unit non-coherent.

  • Ignoring conversion factors when using non-coherent units.

  • Confusing coherence with accuracy or precision.

  • Assuming coherence is independent of the selected base units.

Learning Check

  • What makes a derived unit coherent?

  • Why is the newton coherent in the SI?

  • Is the litre a coherent SI derived unit?

  • Explain why the joule is coherent even though it has a special name.

  • How does coherence simplify physical equations?

Reference

TitleOrganizationUrl

The International System of Units (SI Brochure), 9th Edition

BIPM

https://www.bipm.org/en/publications/si-brochure

NIST Special Publication 811: Guide for the Use of the International System of Units

NIST

https://www.nist.gov/pml/special-publication-811

Related Topic

  • SCI-REF-003-030

  • SCI-REF-003-032

  • SCI-REF-003-038

Sources and verification

Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.

  • Source verification pending; check an authoritative textbook, university, standards body, or peer-reviewed source.

Suggest a correction or source · More in Units & Measurement