✦ScienexySCIENCE KNOWLEDGE LIBRARY
reference · SCI-REF-003-032

Named SI Derived Units and Their Definitions

The SI assigns special names and symbols to selected derived units to make scientific communication more practical and readable. These named units represent combinations of SI base units and are used across mechanics, thermodynamics, electricity, magnetism, optics, photometry, radiation and chemistry. Understanding their definitions, dimensions, relationships and correct usage is essential for scientific calculations and technical documentation.

Mechanics

  • 1 Hz = 1 s⁻¹

  • 1 N = 1 kg·m·s⁻²

  • 1 Pa = 1 N·m⁻²

  • 1 J = 1 N·m

  • 1 W = 1 J·s⁻¹

Electricity And Magnetism

  • 1 C = 1 A·s

  • 1 V = 1 W·A⁻¹

  • 1 F = 1 C·V⁻¹

  • 1 Ω = 1 V·A⁻¹

  • 1 S = 1 Ω⁻¹

  • 1 Wb = 1 V·s

  • 1 T = 1 Wb·m⁻²

  • 1 H = 1 Wb·A⁻¹

Optics And Radiation

  • 1 lm = 1 cd·sr

  • 1 lx = 1 lm·m⁻²

  • 1 Bq = 1 s⁻¹

  • 1 Gy = 1 J·kg⁻¹

  • 1 Sv = 1 J·kg⁻¹

Chemistry

  • 1 kat = 1 mol·s⁻¹

Explanation

HeadingContent

1. Meaning of Named Derived Units

A named SI derived unit is a derived unit assigned a special name and symbol by international agreement. The special name replaces a potentially long combination of base units or previously named derived units. For example, the newton (N) represents kg·m·s⁻².

2. Why Special Names Are Used

Special names make equations, measurement reports and technical communication shorter and easier to interpret. Instead of repeatedly writing kg·m²·s⁻³, scientists can use watt (W). Special names also make it easier to identify the physical quantity being discussed.

3. Hertz

The hertz (Hz) is the SI derived unit of frequency. One hertz equals one cycle per second, or s⁻¹. It is used for periodic phenomena such as oscillations, waves, sound and electromagnetic radiation.

4. Radian and Steradian

The radian (rad) is the special name for the dimensionless SI unit of plane angle. The steradian (sr) is the special name for the dimensionless SI unit of solid angle. Both have unit one, but their names help identify the geometrical quantity being measured.

5. Newton, Pascal and Joule

The newton (N) measures force and equals kg·m·s⁻². The pascal (Pa) measures pressure and stress and equals N/m² = kg·m⁻¹·s⁻². The joule (J) measures energy, work and heat and equals N·m = kg·m²·s⁻².

6. Watt

The watt (W) measures power, the rate of energy transfer or work done. One watt equals one joule per second: W = J/s = kg·m²·s⁻³.

7. Coulomb, Volt and Farad

The coulomb (C) measures electric charge and equals A·s. The volt (V) measures electric potential difference and equals W/A = kg·m²·s⁻³·A⁻¹. The farad (F) measures capacitance and equals C/V = kg⁻¹·m⁻²·s⁴·A².

8. Ohm and Siemens

The ohm (Ω) measures electrical resistance and equals V/A = kg·m²·s⁻³·A⁻². The siemens (S) measures electrical conductance and equals Ω⁻¹ = kg⁻¹·m⁻²·s³·A².

9. Weber, Tesla and Henry

The weber (Wb) measures magnetic flux and equals V·s = kg·m²·s⁻²·A⁻¹. The tesla (T) measures magnetic flux density and equals Wb/m² = kg·s⁻²·A⁻¹. The henry (H) measures inductance and equals Wb/A = kg·m²·s⁻²·A⁻².

10. Lumen and Lux

The lumen (lm) measures luminous flux and equals cd·sr. The lux (lx) measures illuminance and equals lm/m² = cd·sr·m⁻². These units are used in lighting, display technology and photometry.

11. Becquerel, Gray and Sievert

The becquerel (Bq) measures radioactive activity and equals s⁻¹. The gray (Gy) measures absorbed dose of ionizing radiation and equals J/kg = m²·s⁻². The sievert (Sv) measures equivalent dose and effective dose for radiation protection; it also has the dimensional expression J/kg, but its quantity meaning and weighting conventions differ from absorbed dose.

12. Katal

The katal (kat) measures catalytic activity and equals mol/s. It is used to express the amount of substance transformed per unit time by a catalytic process.

13. Relationship Between Named Units

Named derived units can be combined to form other derived units. For example, pressure is N/m², energy is N·m, power is J/s, electric potential difference is W/A, and illuminance is lm/m². A special name does not change the underlying physical dimensions.

14. Correct Symbols and Capitalization

Unit names are written in lowercase in ordinary text, even when named after scientists: newton, pascal, joule and watt. Their symbols generally begin with capital letters when named after people: N, Pa, J and W. The symbols Ω and °C are special cases with prescribed forms. Unit symbols are not pluralized and are not followed by a full stop unless required by sentence punctuation.

15. Distinguishing Similar Units

The hertz and becquerel both have the dimensional expression s⁻¹, but they measure different quantities: frequency and radioactive activity. The gray and sievert both have the dimensional expression J/kg, but they represent different radiation quantities. The physical quantity must therefore always be identified, not inferred from dimensions alone.

Variables

SymbolMeaningSi Unit

Hz

Hertz, frequency

s⁻¹

N

Newton, force

kg·m·s⁻²

Pa

Pascal, pressure or stress

kg·m⁻¹·s⁻²

J

Joule, energy or work

kg·m²·s⁻²

W

Watt, power

kg·m²·s⁻³

C

Coulomb, electric charge

A·s

V

Volt, electric potential difference

kg·m²·s⁻³·A⁻¹

F

Farad, capacitance

kg⁻¹·m⁻²·s⁴·A²

Ω

Ohm, electrical resistance

kg·m²·s⁻³·A⁻²

S

Siemens, electrical conductance

kg⁻¹·m⁻²·s³·A²

Wb

Weber, magnetic flux

kg·m²·s⁻²·A⁻¹

T

Tesla, magnetic flux density

kg·s⁻²·A⁻¹

H

Henry, inductance

kg·m²·s⁻²·A⁻²

lm

Lumen, luminous flux

cd·sr

lx

Lux, illuminance

cd·sr·m⁻²

Bq

Becquerel, radioactive activity

s⁻¹

Gy

Gray, absorbed dose

m²·s⁻²

Sv

Sievert, equivalent dose and effective dose

m²·s⁻²

kat

Katal, catalytic activity

mol·s⁻¹

Example or application

A worked example has not yet been added.

Definition

Named SI derived units are derived units assigned special internationally recognized names and symbols, each exactly equivalent to a defined combination of SI base units.

Purpose

To provide convenient, standardized names and symbols for important derived physical quantities while preserving their exact relationships to SI base units.

Importance

  • Makes scientific equations more readable.

  • Provides internationally standardized unit symbols.

  • Supports communication between scientific disciplines.

  • Reduces long combinations of base-unit symbols.

  • Helps identify the physical meaning of measurements.

  • Supports engineering specifications and laboratory reporting.

Unit Table

QuantityUnit NameSymbolBase Unit Expression

Frequency

hertz

Hz

s⁻¹

Plane angle

radian

rad

1

Solid angle

steradian

sr

1

Force

newton

N

kg·m·s⁻²

Pressure, stress

pascal

Pa

kg·m⁻¹·s⁻²

Energy, work, heat

joule

J

kg·m²·s⁻²

Power

watt

W

kg·m²·s⁻³

Electric charge

coulomb

C

A·s

Electric potential difference

volt

V

kg·m²·s⁻³·A⁻¹

Capacitance

farad

F

kg⁻¹·m⁻²·s⁴·A²

Electrical resistance

ohm

Ω

kg·m²·s⁻³·A⁻²

Electrical conductance

siemens

S

kg⁻¹·m⁻²·s³·A²

Magnetic flux

weber

Wb

kg·m²·s⁻²·A⁻¹

Magnetic flux density

tesla

T

kg·s⁻²·A⁻¹

Inductance

henry

H

kg·m²·s⁻²·A⁻²

Luminous flux

lumen

lm

cd·sr

Illuminance

lux

lx

cd·sr·m⁻²

Radioactive activity

becquerel

Bq

s⁻¹

Absorbed dose

gray

Gy

m²·s⁻²

Equivalent dose and effective dose

sievert

Sv

m²·s⁻²

Catalytic activity

katal

kat

mol·s⁻¹

Common Errors

  • Writing unit names with capital letters unnecessarily.

  • Writing symbols such as Newton or Joule instead of N or J.

  • Pluralizing unit symbols, such as 5 Ns instead of 5 N.

  • Confusing hertz with becquerel because both have unit s⁻¹.

  • Treating gray and sievert as interchangeable physical quantities.

  • Assuming radian and steradian have physical dimensions different from one.

  • Confusing the symbol S for siemens with s for second.

Learning Check

  • What is a named SI derived unit?

  • Express one pascal in SI base units.

  • What is the difference between gray and sievert?

  • Why do hertz and becquerel have the same dimensional expression?

  • What are the SI units of capacitance and electrical resistance?

  • Why is the radian considered dimensionless?

Reference

TitleOrganizationUrl

The International System of Units (SI Brochure), 9th Edition

BIPM

https://www.bipm.org/en/publications/si-brochure

NIST Special Publication 330

NIST

https://www.nist.gov/pml/special-publication-330

Related Topic

  • SCI-REF-003-030

  • SCI-REF-003-031

  • SCI-REF-003-033

  • SCI-REF-003-034

  • SCI-REF-003-035

  • SCI-REF-003-036

  • SCI-REF-003-037

Sources and verification

Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.

  • Source verification pending; check an authoritative textbook, university, standards body, or peer-reviewed source.

Suggest a correction or source · More in Units & Measurement