| Heading | Content |
|---|---|
1. Scope of Mechanical Measurement | Mechanics is the branch of physics concerned with the motion, equilibrium and interactions of bodies. Its measurable quantities include displacement, velocity, acceleration, force, momentum, impulse, torque, work, energy, power, pressure, density and mechanical properties of materials. |
2. Area and Volume | Area is the measure of a two-dimensional surface and has the SI unit square metre (m²). Volume measures three-dimensional space and has the SI unit cubic metre (m³). These quantities are important in geometry, fluid mechanics, material calculations and mechanical design. |
3. Velocity and Speed | Velocity is the rate of change of displacement with time, while speed is the magnitude of velocity. Both use the SI unit metre per second (m/s). Velocity is a vector quantity; speed is scalar. |
4. Acceleration | Acceleration is the rate of change of velocity with time. Its SI unit is metre per second squared (m/s²). It describes changes in the magnitude or direction of velocity. |
5. Density and Specific Volume | Mass density is mass per unit volume and has unit kg/m³. Specific volume is volume per unit mass and has unit m³/kg. They are reciprocals for a uniform material under the same conditions. |
6. Momentum and Impulse | Linear momentum is mass multiplied by velocity and has unit kg·m/s. Impulse is the change in momentum and has unit N·s, which is equivalent to kg·m/s. Both are important in collisions and dynamic systems. |
7. Force | Force is the rate of change of momentum. For constant mass in classical mechanics, Newton's second law gives F = ma. The SI unit is the newton (N), equal to kg·m·s⁻². |
8. Weight | Weight is the gravitational force acting on a body. Its SI unit is the newton, not the kilogram. Mass is a property of a body measured in kilograms, whereas weight is a force that depends on the local gravitational field. |
9. Work and Energy | Mechanical work is energy transferred by a force through displacement. Its SI unit is the joule (J), equal to N·m or kg·m²·s⁻². Kinetic energy and potential energy are also measured in joules. |
10. Power | Power is the rate of doing work or transferring energy. Its SI unit is the watt (W), equal to J/s or kg·m²·s⁻³. |
11. Pressure and Stress | Pressure is normal force per unit area and is measured in pascals (Pa), equal to N/m². Mechanical stress also has unit Pa, although stress is generally represented as a tensor in continuum mechanics and can include normal and shear components. |
12. Torque and Moment of Force | Torque describes the turning effect of a force about an axis. Its SI unit is newton metre (N·m). Although this has the same base-unit expression as the joule, torque is not energy; the quantities have different physical meanings and should be clearly identified. |
13. Angular Velocity and Angular Acceleration | Angular velocity is the rate of change of angular displacement and is expressed in rad/s. Angular acceleration is the rate of change of angular velocity and is expressed in rad/s². Since the radian is dimensionless, their dimensional expressions are s⁻¹ and s⁻², respectively. |
14. Moment of Inertia | Mass moment of inertia describes resistance to angular acceleration about a specified axis. Its SI unit is kg·m². It depends on the mass distribution relative to the axis of rotation. |
15. Angular Momentum | Angular momentum is the rotational analogue of linear momentum. Its SI unit is kg·m²/s, equivalent to N·m·s. It is conserved in an isolated system when the net external torque is zero. |
16. Mechanical Material Properties | Young's modulus, shear modulus and bulk modulus have the SI unit pascal (Pa), because they represent stress divided by strain and strain is dimensionless. Poisson's ratio is dimensionless. Hardness may be reported using standardized test scales, and its interpretation depends on the test method. |
17. Mechanical and Fluid Quantities | Dynamic viscosity has unit Pa·s or kg·m⁻¹·s⁻¹. Kinematic viscosity has unit m²/s. Volumetric flow rate has unit m³/s, while mass flow rate has unit kg/s. These are central quantities in fluid mechanics and hydraulic engineering. |
18. Dimensional Analysis in Mechanics | Mechanical quantities are often represented using the fundamental dimensions mass (M), length (L) and time (T). For example, force has dimension MLT⁻², energy has ML²T⁻², pressure has ML⁻¹T⁻², and power has ML²T⁻³. |
19. Measurement and Engineering Use | Mechanical derived units are used in machine design, structural engineering, automotive systems, robotics, aerospace, manufacturing, biomechanics and experimental physics. Correct unit selection is essential for safety calculations and technical specifications. |
Derived Units in Mechanics
Mechanics uses derived units to quantify motion, forces, momentum, energy, work, power, pressure, rotational motion, elasticity and fluid behavior. Most mechanical units are formed from the SI base units of length, mass and time, although temperature and other quantities may appear in specialized mechanical applications. Understanding these units and their dimensional relationships is essential for solving mechanics problems and designing mechanical systems.
Motion
Velocity: v = Δx/Δt; unit = m·s⁻¹
Acceleration: a = Δv/Δt; unit = m·s⁻²
Mass And Force
Density: ρ = m/V; unit = kg·m⁻³
Momentum: p = mv; unit = kg·m·s⁻¹
Force: F = ma; unit = N = kg·m·s⁻²
Impulse: I = FΔt = Δp; unit = N·s
Energy And Power
Work: W = Fd cos θ; unit = J
Kinetic energy: Eₖ = ½mv²; unit = J
Power: P = W/Δt; unit = W = J·s⁻¹
Rotation
Torque: τ = r × F; unit = N·m
Angular velocity: ω = Δθ/Δt; unit = rad·s⁻¹
Angular acceleration: α = Δω/Δt; unit = rad·s⁻²
Moment of inertia: I = Σmᵢrᵢ²; unit = kg·m²
Angular momentum: L = Iω; unit = kg·m²·s⁻¹
Materials And Fluids
Pressure: p = F/A; unit = Pa
Dynamic viscosity: μ = τ/shear rate; unit = Pa·s
Kinematic viscosity: ν = μ/ρ; unit = m²·s⁻¹
Volumetric flow rate: Q = ΔV/Δt; unit = m³·s⁻¹
Mass flow rate: ṁ = Δm/Δt; unit = kg·s⁻¹
Explanation
Variables
| Symbol | Meaning | Si Unit |
|---|---|---|
x | Position or displacement | m |
t | Time | s |
v | Velocity | m·s⁻¹ |
a | Acceleration | m·s⁻² |
m | Mass | kg |
ρ | Mass density | kg·m⁻³ |
F | Force | N |
p | Linear momentum or pressure, depending on context | kg·m·s⁻¹ or Pa |
W | Work | J |
P | Power | W |
τ | Torque | N·m |
ω | Angular velocity | rad·s⁻¹ |
α | Angular acceleration | rad·s⁻² |
I | Moment of inertia | kg·m² |
μ | Dynamic viscosity | Pa·s |
ν | Kinematic viscosity | m²·s⁻¹ |
Example or application
A worked example has not yet been added.
Definition
Mechanical derived units are units formed from SI base units to express mechanical quantities such as motion, force, momentum, energy, power, pressure, torque and material properties.
Purpose
To establish standardized units for the measurable quantities used in classical mechanics, rotational mechanics, material mechanics and fluid mechanics.
Importance
Enables quantitative analysis of motion and forces.
Supports machine and structural design.
Provides a consistent language for energy and power calculations.
Makes fluid and material properties comparable.
Helps prevent dimensional and conversion errors.
Supports engineering safety and performance evaluation.
Worked Example
| Problem | Solution | Answer |
|---|---|---|
A 2 kg object accelerates at 3 m/s². Calculate the force. |
| 6 N. |
A machine transfers 600 J of energy in 10 s. Calculate its average power. |
| 60 W. |
A fluid has dynamic viscosity 0.002 Pa·s and density 1000 kg/m³. Calculate its kinematic viscosity. |
| 2 × 10⁻⁶ m²/s. |
Common Errors
Using kilogram as the unit of weight instead of newton.
Confusing torque in N·m with energy in J.
Writing angular velocity in Hz without converting or clarifying the quantity.
Confusing dynamic viscosity with kinematic viscosity.
Forgetting that strain and Poisson's ratio are dimensionless.
Using pressure and stress as if their physical meanings were identical in every context.
Learning Check
What is the SI unit of momentum?
Why is torque expressed in N·m rather than joules?
What is the difference between mass and weight?
Express the pascal in SI base units.
What is the difference between dynamic and kinematic viscosity?
What is the SI unit of moment of inertia?
Reference
| Title | Authors | Publisher | Organization | Url |
|---|---|---|---|---|
Fundamentals of Physics | David Halliday, Robert Resnick and Jearl Walker | Wiley | ||
Engineering Mechanics: Dynamics | J. L. Meriam and L. G. Kraige | Wiley | ||
The International System of Units (SI Brochure) | BIPM | https://www.bipm.org/en/publications/si-brochure |
Related Topic
SCI-REF-003-030
SCI-REF-003-032
SCI-REF-003-034
SCI-REF-003-039
Sources and verification
Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.
- Source verification pending; check an authoritative textbook, university, standards body, or peer-reviewed source.
Suggest a correction or source · More in Units & Measurement