| Heading | Content |
|---|---|
1. Scope of Thermal Measurement | Thermodynamics studies energy, heat, work, temperature and the properties of systems. Heat transfer studies the movement of thermal energy by conduction, convection and radiation. Their measurable quantities include temperature, heat, internal energy, enthalpy, entropy, heat capacity, specific heat capacity, thermal conductivity and heat flux. |
2. Temperature | Thermodynamic temperature is a base quantity in the SI and is measured in kelvin (K). Temperature differences may be expressed in kelvins or degrees Celsius with the same numerical magnitude. Celsius temperature is related to thermodynamic temperature by t/°C = T/K − 273.15. |
3. Heat and Thermal Energy | Heat is energy transferred between systems because of a temperature difference. It is measured in joules (J), equivalent to kg·m²·s⁻². Heat is energy in transit, not a property stored as heat within a system; internal energy is a system property. |
4. Internal Energy and Enthalpy | Internal energy is the microscopic energy associated with a system and is measured in joules. Enthalpy is defined as H = U + pV and is also measured in joules. Specific internal energy and specific enthalpy are measured in J/kg. |
5. Entropy | Entropy is a thermodynamic state function associated with energy dispersal and the number of accessible microscopic configurations. Its SI unit is joule per kelvin (J/K). Specific entropy has unit J/(kg·K), while molar entropy has unit J/(mol·K). |
6. Heat Capacity and Specific Heat Capacity | Heat capacity is the energy required to raise the temperature of a body by one kelvin and has unit J/K. Specific heat capacity is heat capacity per unit mass and has unit J/(kg·K). Molar heat capacity is measured in J/(mol·K). |
7. Latent Heat and Specific Latent Heat | Latent heat is energy absorbed or released during a phase transition. The total energy is measured in joules. Specific latent heat, energy per unit mass, is measured in J/kg. |
8. Thermal Conductivity | Thermal conductivity describes a material's ability to conduct heat. Its SI unit is W/(m·K), equivalent to kg·m·s⁻³·K⁻¹. It appears in Fourier's law of heat conduction. |
9. Heat Flux and Heat Transfer Rate | Heat transfer rate is thermal energy transferred per unit time and has unit watt (W). Heat flux is heat transfer rate per unit area and has unit W/m². These quantities are important in insulation, heat exchangers and thermal management. |
10. Thermal Diffusivity | Thermal diffusivity describes how rapidly temperature changes spread through a material. It is defined as thermal conductivity divided by density and specific heat capacity. Its SI unit is m²/s. |
11. Heat Transfer Coefficient | The convective heat transfer coefficient relates heat flux to the temperature difference between a surface and a surrounding fluid. Its SI unit is W/(m²·K). Its value depends on geometry, fluid properties, flow conditions and surface characteristics. |
12. Thermal Expansion Coefficients | The linear thermal expansion coefficient measures fractional change in length per unit temperature change and has unit K⁻¹. Volumetric thermal expansion coefficient also has unit K⁻¹. For isotropic solids and small temperature changes, the volumetric coefficient is approximately three times the linear coefficient. |
13. Pressure and Compressibility | Thermodynamic pressure is measured in pascals (Pa). Isothermal and adiabatic compressibility have unit Pa⁻¹. Bulk modulus has unit Pa and describes resistance to uniform compression. |
14. Thermal Radiation | Radiative heat transfer involves electromagnetic energy emitted and absorbed by matter. Total radiant power is measured in watts, radiant energy in joules, and radiant exitance or irradiance in W/m². Spectral radiometric quantities require additional units involving wavelength or frequency intervals. |
15. Thermodynamic Potentials and Molar Quantities | Helmholtz free energy and Gibbs free energy are measured in joules. Their specific forms are J/kg, and their molar forms are J/mol. Chemical potential is energy per amount of substance and has unit J/mol. |
16. Thermal Measurement Applications | These units are used in engines, turbines, boilers, refrigeration, air conditioning, thermal insulation, electronics cooling, renewable energy, chemical reactors and industrial process control. |
Derived Units in Thermodynamics and Heat Transfer
Thermodynamics and heat transfer use derived units to describe temperature-related energy, heat, work, entropy, enthalpy, thermal capacity, conductivity, heat flux and mass or energy transfer. These units are formed from SI base units and named derived units such as joule, watt and pascal. Their correct use is essential in thermal engineering, energy systems, refrigeration, power generation, materials science and chemical processes.
Energy
Heat: Q; unit = J
Enthalpy: H = U + pV; unit = J
Specific enthalpy: h = H/m; unit = J·kg⁻¹
Entropy: S; unit = J·K⁻¹
Specific entropy: s = S/m; unit = J·kg⁻¹·K⁻¹
Heat Capacity
Heat capacity: C = dQ/dT; unit = J·K⁻¹
Specific heat capacity: c = (1/m)(dQ/dT); unit = J·kg⁻¹·K⁻¹
Molar heat capacity: Cₘ = (1/n)(dQ/dT); unit = J·mol⁻¹·K⁻¹
Heat Transfer
Fourier's law: q = −k∇T
Thermal conductivity k: W·m⁻¹·K⁻¹
Heat flux: q; W·m⁻²
Convective heat transfer: Q̇ = hA(Tₛ − T∞)
Thermal diffusivity: α = k/(ρcₚ); m²·s⁻¹
Thermal Properties
Linear expansion coefficient: αₗ = (1/L)(dL/dT); K⁻¹
Bulk modulus: K = −V(dp/dV); Pa
Compressibility: β = −(1/V)(dV/dp); Pa⁻¹
Radiation
Stefan–Boltzmann law: E = εσT⁴
Radiant exitance E: W·m⁻²
Stefan–Boltzmann constant σ: W·m⁻²·K⁻⁴
Explanation
Variables
| Symbol | Meaning | Si Unit |
|---|---|---|
T | Thermodynamic temperature | K |
Q | Heat transferred | J |
U | Internal energy | J |
H | Enthalpy | J |
S | Entropy | J·K⁻¹ |
c | Specific heat capacity | J·kg⁻¹·K⁻¹ |
k | Thermal conductivity | W·m⁻¹·K⁻¹ |
q | Heat flux | W·m⁻² |
h | Convective heat transfer coefficient; context-dependent symbol | W·m⁻²·K⁻¹ |
α | Thermal diffusivity | m²·s⁻¹ |
ρ | Mass density | kg·m⁻³ |
σ | Stefan–Boltzmann constant | W·m⁻²·K⁻⁴ |
Example or application
A worked example has not yet been added.
Definition
Thermodynamic and heat-transfer derived units are SI units formed to express energy, entropy, thermal capacities, heat-transfer rates, material thermal properties and other measurable quantities associated with thermal systems.
Purpose
To provide consistent units for describing thermal energy, thermodynamic state properties and heat-transfer processes.
Importance
Supports energy balance calculations.
Enables thermal system design.
Allows comparison of material thermal properties.
Supports refrigeration and power-generation engineering.
Makes heat-transfer equations dimensionally consistent.
Improves accuracy in thermal experiments and industrial measurements.
Worked Example
| Problem | Solution | Answer |
|---|---|---|
Calculate the energy required to heat 2 kg of water by 10 K, using c = 4180 J/(kg·K). |
| 83.6 kJ. |
A surface transfers 500 W of heat through an area of 2 m². Calculate heat flux. |
| 250 W/m². |
Common Errors
Treating heat as a substance stored inside a body.
Confusing heat capacity with specific heat capacity.
Using Celsius temperature directly in equations requiring absolute thermodynamic temperature.
Confusing thermal conductivity with thermal diffusivity.
Mixing heat flux and total heat transfer rate.
Using the same symbol for different thermal quantities without defining it.
Confusing entropy units with specific entropy units.
Learning Check
What is the SI unit of entropy?
What is the difference between heat capacity and specific heat capacity?
What is the SI unit of thermal conductivity?
Why is thermal diffusivity measured in m²/s?
What is the difference between heat flux and heat transfer rate?
What is the SI unit of the convective heat transfer coefficient?
Reference
| Title | Authors | Publisher | Organization | Url |
|---|---|---|---|---|
Fundamentals of Engineering Thermodynamics | Michael J. Moran, Howard N. Shapiro and others | Wiley | ||
Heat and Mass Transfer: Fundamentals and Applications | Yunus A. Çengel and Afshin J. Ghajar | McGraw-Hill | ||
The International System of Units (SI Brochure) | BIPM | https://www.bipm.org/en/publications/si-brochure |
Related Topic
SCI-REF-003-030
SCI-REF-003-032
SCI-REF-003-033
SCI-REF-003-037
Sources and verification
Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.
- Source verification pending; check an authoritative textbook, university, standards body, or peer-reviewed source.
Suggest a correction or source · More in Units & Measurement