✦ScienexySCIENCE KNOWLEDGE LIBRARY
reference · SCI-REF-003-038

Non-SI Units Accepted for Use with the SI

Although the International System of Units is the internationally preferred measurement system, certain non-SI units remain accepted for use with the SI because of their practical importance, established scientific use or historical adoption. These include the minute, hour, day, degree, litre, tonne, electronvolt, dalton, astronomical unit and certain logarithmic or specialized units. Understanding their definitions, conversion factors, application limits and status is essential for correct scientific and technical communication.

Time

  • 1 min = 60 s

  • 1 h = 3600 s

  • 1 d = 86,400 s

Angle

  • 1° = π/180 rad

  • 1′ = 1/60°

  • 1″ = 1/60′

Area And Volume

  • 1 ha = 10⁴ m²

  • 1 L = 1 dm³ = 10⁻³ m³

Mass

  • 1 t = 1000 kg

  • 1 Da = 1 u = 1/12 of the mass of a carbon-12 atom

Energy And Length

  • 1 eV = 1.602176634 × 10⁻¹⁹ J

  • 1 au = 149,597,870,700 m

  • 1 Å = 10⁻¹⁰ m

Navigation

  • 1 nautical mile = 1852 m

  • 1 knot = 1852/3600 m·s⁻¹

Pressure

  • 1 bar = 10⁵ Pa

  • 1 atm = 101325 Pa

Specialized

  • 1 barn = 10⁻²⁸ m²

  • 1 Ci = 3.7 × 10¹⁰ Bq

  • 1 rad = 0.01 Gy

  • 1 rem = 0.01 Sv

Explanation

HeadingContent

1. Meaning of Non-SI Units Accepted for Use with the SI

Non-SI units accepted for use with the SI are units that do not belong to the SI itself but are recognized as suitable for use alongside SI units in specified contexts. Their acceptance does not make them SI base units or SI derived units.

2. Why Some Non-SI Units Remain in Use

Certain non-SI units are deeply established in everyday life, commerce, engineering or specialized scientific disciplines. Replacing them everywhere may be impractical or may reduce continuity with historical datasets. The SI therefore recognizes selected units for use in appropriate contexts while encouraging clear conversion and consistent reporting.

3. Minute, Hour and Day

The minute (min), hour (h) and day (d) are accepted units of time. Their exact relationships are 1 min = 60 s, 1 h = 3600 s and 1 d = 86,400 s. The day used in this definition is exactly 24 hours, not the variable duration of a solar day.

4. Degree of Arc, Arcminute and Arcsecond

The degree (°), arcminute (′) and arcsecond (″) are units of plane angle. One degree equals π/180 radians; one arcminute equals 1/60 degree; and one arcsecond equals 1/60 arcminute. They are widely used in navigation, astronomy and surveying.

5. Hectare

The hectare (ha) is a unit of area commonly used in land measurement. One hectare is exactly 10,000 m², equivalent to one square hectometre. It is especially useful in agriculture, forestry and land administration.

6. Litre

The litre (L or l) is accepted for use with the SI as a unit of volume. One litre is exactly 1 dm³ or 10⁻³ m³. It is widely used for liquids, laboratory solutions, fuel and commercial products.

7. Tonne

The tonne (t), also called the metric tonne, is accepted for use with the SI as a unit of mass. One tonne equals exactly 1000 kg. It must not be confused with short tons or long tons, which belong to other measurement conventions.

8. Electronvolt

The electronvolt (eV) is a unit of energy accepted for use with the SI in appropriate fields. It is the energy gained by an elementary charge when it moves through a potential difference of one volt in magnitude. Its exact value is 1 eV = 1.602176634 × 10⁻¹⁹ J.

9. Dalton

The dalton (Da), also known as the unified atomic mass unit (u), is a unit of mass used for atoms, molecules and molecular masses. It is defined as one-twelfth of the mass of a free carbon-12 atom in its ground state at rest. Its value in kilograms is determined experimentally rather than being exact.

10. Astronomical Unit

The astronomical unit (au) is a unit of length used mainly in the Solar System. It is defined exactly as 149,597,870,700 m. It is useful for expressing planetary distances and orbital dimensions.

11. Nautical Mile and Knot

The nautical mile is used in marine and air navigation and equals exactly 1852 m. The knot is a speed unit equal to one nautical mile per hour, or exactly 1852/3600 m/s. These units are recognized for specialized navigation use but are not SI units.

12. Bar and Standard Atmosphere

The bar is a pressure unit equal to exactly 100,000 Pa. The standard atmosphere (atm) is exactly 101,325 Pa. Both are used in certain scientific, industrial and engineering contexts, although pascal is the SI unit of pressure.

13. Angstrom

The ångström (Å) is a length unit equal to exactly 10⁻¹⁰ m. It is widely encountered in crystallography, atomic physics and molecular science, but it is not an SI unit. Nanometres and picometres are SI-compatible alternatives using prefixes.

14. Barn

The barn (b) is a unit of area used in nuclear and particle physics to express reaction cross-sections. One barn equals exactly 10⁻²⁸ m². Its continued use reflects the small scale of nuclear interaction cross-sections.

15. Curie and Other Legacy Radiation Units

The curie (Ci) is a legacy unit of radioactive activity, with 1 Ci = 3.7 × 10¹⁰ Bq exactly. The rad and rem are legacy radiation units, with 1 rad = 0.01 Gy and 1 rem = 0.01 Sv. They are not SI units and modern scientific and regulatory reporting generally uses Bq, Gy and Sv.

16. Logarithmic Units

The bel and decibel are logarithmic units used to express ratios, especially in acoustics, electronics and telecommunications. A decibel is one-tenth of a bel. The decibel is not a unit of a physical quantity by itself unless the reference quantity and ratio convention are specified.

17. Conversion and Traceability

When a non-SI unit is used, its relationship to the SI should be known and conversion should be performed using an exact or appropriately evaluated conversion factor. Measurements should remain traceable to recognized standards and should identify the unit clearly.

18. Choosing Between SI and Non-SI Units

The SI should generally be preferred in scientific publications, engineering calculations and international technical communication. A non-SI unit may be useful when it is conventional in a specific field, but the context, conversion and meaning should be clear. Dual reporting can be useful during transition or when communicating with audiences familiar with different systems.

19. Important Distinction Between Accepted and SI Units

An accepted non-SI unit is not automatically an SI unit. The litre is accepted for use with the SI but is not an SI derived unit. The electronvolt is accepted for use with the SI but is not the SI unit of energy; the joule remains the SI unit.

Variables

SymbolMeaningSi Equivalent

min

Minute

60 s

h

Hour

3600 s

d

Day

86400 s

°

Degree of plane angle

π/180 rad

ha

Hectare

10000 m²

L

Litre

10⁻³ m³

t

Tonne

1000 kg

eV

Electronvolt

1.602176634 × 10⁻¹⁹ J

Da

Dalton

1/12 of the mass of a carbon-12 atom

au

Astronomical unit

149597870700 m

nmi

Nautical mile

1852 m

kn

Knot

1852/3600 m·s⁻¹

bar

Bar

100000 Pa

atm

Standard atmosphere

101325 Pa

Å

Ångström

10⁻¹⁰ m

b

Barn

10⁻²⁸ m²

Example or application

A worked example has not yet been added.

Definition

A non-SI unit accepted for use with the SI is a unit outside the SI that is recognized as suitable for use alongside SI units in specified contexts, with its relationship to SI units defined or established.

Purpose

To explain the status, definitions, conversion relationships and appropriate applications of non-SI units that are accepted for use alongside the SI or retained in specialized fields.

Importance

  • Supports conversion between established units and SI units.

  • Preserves continuity with historical scientific data.

  • Enables communication in specialized disciplines.

  • Reduces ambiguity in international measurement reporting.

  • Helps distinguish SI units from accepted non-SI units.

  • Supports safe and accurate engineering and laboratory calculations.

Worked Example

ProblemSolutionAnswer

Convert 5 litres into cubic metres.

  • 1 L = 10⁻³ m³.

  • 5 L = 5 × 10⁻³ m³.

0.005 m³.

Convert 3 electronvolts into joules.

  • 1 eV = 1.602176634 × 10⁻¹⁹ J.

  • 3 eV = 3 × 1.602176634 × 10⁻¹⁹ J.

  • 3 eV = 4.806529902 × 10⁻¹⁹ J.

4.806529902 × 10⁻¹⁹ J.

Convert 2 knots into metres per second.

  • 1 knot = 1852/3600 m/s.

  • 2 knots = 2 × 1852/3600 m/s.

  • 2 knots ≈ 1.028 m/s.

Approximately 1.028 m/s.

Common Errors

  • Assuming all accepted non-SI units are SI units.

  • Confusing the tonne with other types of ton.

  • Confusing the litre with the cubic metre.

  • Treating the electronvolt as a base SI unit.

  • Confusing the astronomical unit with a time unit.

  • Using nautical miles and statute miles interchangeably.

  • Confusing bar with pascal without conversion.

  • Using legacy radiation units without clearly identifying them.

  • Assuming the decibel represents an absolute physical quantity without a reference.

Learning Check

  • What is the difference between an SI unit and a non-SI unit accepted for use with the SI?

  • How many cubic metres are in one litre?

  • What is the exact SI value of one electronvolt?

  • What is the difference between a nautical mile and a knot?

  • How many pascals are in one bar?

  • Why is the dalton useful in molecular science?

  • Why should the SI generally be preferred in scientific reporting?

Reference

TitleOrganizationUrl

The International System of Units (SI Brochure), 9th Edition

BIPM

https://www.bipm.org/en/publications/si-brochure

NIST Special Publication 811: Guide for the Use of the International System of Units

NIST

https://www.nist.gov/pml/special-publication-811

IUPAC Green Book

IUPAC

https://iupac.org/what-we-do/books/greenbook/

Related Topic

  • SCI-REF-003-013

  • SCI-REF-003-015

  • SCI-REF-003-016

  • SCI-REF-003-018

  • SCI-REF-003-019

Sources and verification

Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.

  • Source verification pending; check an authoritative textbook, university, standards body, or peer-reviewed source.

Suggest a correction or source · More in Units & Measurement