A decimal multiple is a unit whose magnitude is greater than the unprefixed unit, while a decimal submultiple is smaller. Kilo, mega, giga and tera are examples of prefixes used for multiples; deci, centi, milli, micro and nano are examples used for submultiples. The relationship is always based on powers of ten. For example, 1 kilometre equals 1000 metres, whereas 1 millimetre equals 0.001 metre. The choice of prefix should make a measurement convenient to read and compare without changing its physical value. A laboratory measurement of 0.000004 metre can be written as 4 μm. Similarly, 2500000 watts can be written as 2.5 MW. In scientific writing, a prefix should be selected so the numerical value is reasonably readable and the context remains clear. Prefixes are applied to a unit symbol as a single multiplier. Multiple prefixes must not be stacked. For example, a micromillimetre is not an accepted standard construction; the quantity should be expressed using a suitable single prefix or scientific notation. The SI base unit of mass is the kilogram, which is unusual because it already contains the prefix kilo. For mass multiples and submultiples, prefixes are attached to gram rather than kilogram. Thus, 1 mg = 10⁻⁶ kg, 1 μg = 10⁻⁹ kg, and 1 Mg = 10³ kg. The gram itself is 10⁻³ kg. When a prefix is attached to a compound unit, its multiplier applies to the prefixed unit in the expression. For example, 1 km/h means 1000 m per hour, while 1 km² means (1000 m)² = 10⁶ m². This distinction is especially important for area, volume, density and other derived quantities. Prefix conversion should be performed by comparing the powers of ten of the original and target prefixes. When converting from a larger unit to a smaller unit, the numerical value increases; when converting from a smaller unit to a larger unit, it decreases. Prefix multipliers are exact by definition, but the measured quantity may still have uncertainty. The number of significant digits should therefore reflect the measurement, not the exactness of the prefix.
Decimal Multiples and Submultiples of SI Units
Decimal multiples and submultiples are units formed by attaching SI prefixes to units to represent values larger or smaller than the original unit by exact powers of ten. Their systematic use makes measurement expressions manageable, supports calculations across different scales and maintains consistency in scientific communication.
Prefixed Unit
1 P-u = 10^p u
Conversion Between Prefixes
n₂ = n₁ × 10^(p₁-p₂)
Mass Relations
1 g = 10⁻³ kg
1 mg = 10⁻⁶ kg
1 μg = 10⁻⁹ kg
1 Mg = 10³ kg
Area And Volume
1 cm² = 10⁻⁴ m²
1 mm² = 10⁻⁶ m²
1 cm³ = 10⁻⁶ m³
1 mm³ = 10⁻⁹ m³
Explanation
Variables
| Symbol | Meaning | Si Unit |
|---|---|---|
P-u | Unit carrying an SI prefix | Depends on the quantity |
p | Power of ten represented by the prefix | Dimensionless |
n₁ | Numerical value in the original prefixed unit | Dimensionless |
n₂ | Numerical value in the target prefixed unit | Dimensionless |
u | Corresponding unprefixed unit | Relevant SI unit |
Example or application
A worked example has not yet been added.
Definition
A decimal multiple or submultiple is a unit formed by attaching an SI prefix to a unit, multiplying its magnitude by an exact power of ten.
Purpose
To express quantities at different scales using consistent decimal relationships and convenient numerical values.
Importance
Correct use of decimal multiples and submultiples prevents scale errors, improves readability and makes it easier to compare measurements from different instruments, laboratories and scientific disciplines.
Selection Principles
Choose a prefix that produces a clear and convenient numerical value.
Use the same unit and prefix when comparing quantities directly.
Use standard symbols and preserve their capitalization.
For calculations involving different prefixes, convert to a common unit or use explicit powers of ten.
For squared and cubed units, apply the conversion factor to the entire unit power.
For mass, attach prefixes to gram rather than to kilogram.
Avoid unnecessary prefix changes within a table or calculation.
Mass Prefix Convention
Explanation
The SI base unit of mass is kilogram, but prefixes for mass are conventionally attached to gram.
Examples
1 kg = 1000 g
1 g = 1000 mg
1 mg = 1000 μg
1 Mg = 1000 kg
1 μg = 10⁻⁹ kg
Worked Examples
| Problem | Solution | Answer |
|---|---|---|
Convert 4.8 MW into watts. | Mega represents 10⁶. Therefore, 4.8 MW = 4.8 × 10⁶ W = 4,800,000 W. | 4,800,000 W |
Convert 0.025 m into millimetres. | 1 m = 1000 mm. Therefore, 0.025 × 1000 = 25 mm. | 25 mm |
Convert 350 μg into milligrams. | 1 mg = 1000 μg. Therefore, 350 μg ÷ 1000 = 0.350 mg. | 0.350 mg |
Convert 2.4 km² into square metres. | 1 km = 10³ m. Squaring gives 1 km² = 10⁶ m². Therefore, 2.4 km² = 2.4 × 10⁶ m². | 2.4 × 10⁶ m² |
Convert 5.6 cm³ into cubic metres. | 1 cm = 10⁻² m. Cubing gives 1 cm³ = 10⁻⁶ m³. Therefore, 5.6 cm³ = 5.6 × 10⁻⁶ m³. | 5.6 × 10⁻⁶ m³ |
Common Mistakes
Applying the linear conversion factor to an area or volume without raising it to the appropriate power.
Attaching prefixes to kilogram instead of gram.
Confusing milligram with microgram.
Assuming every prefix changes a unit by a factor of 1000.
Stacking prefixes instead of choosing a standard single prefix.
Changing the prefix without changing the numerical value.
Removing significant zeros that communicate measurement precision.
Limitations And Considerations
A convenient prefix does not imply that the original measurement is more accurate.
The choice of prefix can depend on scientific convention and the measurement's application.
Some specialized units do not commonly use every SI prefix.
Prefix conversion factors are exact, but measured quantities may have uncertainty.
The kilogram convention must be handled carefully in mass calculations.
Scientific Applications
Electrical engineering: mA, μA, kΩ, MΩ and pF.
Chemistry: mmol, μmol, mmol/L and μmol/L.
Biology: μm and nm for cells and molecular dimensions.
Mechanical engineering: mm, MPa and kW.
Astronomy: Gm, Tm and larger distance scales.
Medicine: mg, μg and mL in measurement and laboratory reporting.
Related Concepts
SI prefix system
Scientific notation
Dimensional analysis
Area and volume conversion
Significant figures
Reference
| Title | Organization | Url |
|---|---|---|
The International System of Units (SI Brochure), 9th edition | BIPM | https://www.bipm.org/en/publications/si-brochure |
Guide for the Use of the International System of Units (SI), NIST SP 811 | NIST | https://www.nist.gov/pml/special-publication-811 |
Related Topic
Introduction to SI Prefixes and Powers of Ten
Fundamental Principles of Unit Conversion
Conversion of Derived, Compound and Complex Units
Sources and verification
Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.
- Source verification pending; check an authoritative textbook, university, standards body, or peer-reviewed source.
Suggest a correction or source · More in Units & Measurement