✦ScienexySCIENCE KNOWLEDGE LIBRARY
reference · SCI-REF-003-047

Temperature Scales and Temperature Conversion

Temperature scales assign numerical values to thermal states using defined reference points and scale intervals. The Celsius, Kelvin, Fahrenheit and Rankine scales are used in different scientific, engineering and everyday contexts. Temperature conversion requires distinguishing absolute temperature from temperature differences because some scale conversions involve an offset as well as a multiplicative factor.

Celsius Kelvin

T(K) = t(°C) + 273.15

Kelvin Celsius

t(°C) = T(K) - 273.15

Celsius Fahrenheit

t(°F) = (9/5)t(°C) + 32

Fahrenheit Celsius

t(°C) = (5/9)[t(°F) - 32]

Kelvin Rankine

T(°R) = (9/5)T(K)

Rankine Kelvin

T(K) = (5/9)T(°R)

Fahrenheit Rankine

T(°R) = t(°F) + 459.67

Temperature Intervals

  • ΔT(K) = Δt(°C)

  • Δt(°F) = (9/5)Δt(°C)

  • Δt(°R) = ΔT(K) × 9/5

Explanation

Temperature is a physical quantity describing the thermal state of a system and is central to thermodynamics, heat transfer, chemistry, meteorology and engineering. Different temperature scales have been developed for scientific and practical purposes. The Celsius scale uses the freezing and boiling points of water at standard atmospheric pressure as historical reference points, with 0 °C and 100 °C respectively. The modern Celsius scale is related to the thermodynamic temperature scale by an exact offset of 273.15 kelvin. The kelvin is the SI base unit of thermodynamic temperature. Its zero corresponds to absolute zero, the lower limit of thermodynamic temperature. A temperature interval of one kelvin has the same magnitude as an interval of one degree Celsius. The Fahrenheit scale is commonly used in the United States for weather and everyday temperature reporting. Water freezes at 32 °F and boils at 212 °F under the same conventional reference conditions. The Rankine scale is an absolute temperature scale using Fahrenheit-sized intervals; its zero is absolute zero. Temperature conversions differ from ordinary length or mass conversions because the zero points of the scales are not all the same. Converting Celsius to Fahrenheit requires multiplying by 9/5 and adding 32. Converting Celsius to kelvin requires adding 273.15. For temperature differences, however, the offsets disappear. A change of 10 °C is a change of 10 K, while the same interval is 18 °F. Absolute temperature and temperature interval must therefore be distinguished. In thermodynamic equations, absolute temperature is generally required. For example, the ideal gas law uses temperature in kelvin, not Celsius. Using Celsius directly in an equation that requires absolute temperature can produce a physically incorrect result. In heat-transfer calculations, a temperature difference may be expressed in kelvin or degrees Celsius because their interval sizes are equal. In engineering practice, it is also important to distinguish a temperature reading from a temperature difference and to state whether a value is absolute or relative. The exact conversion formulas should be applied according to the quantity being converted.

Variables

SymbolMeaningSi Unit

T

Thermodynamic absolute temperature

K

t

Temperature expressed on a relative scale such as Celsius or Fahrenheit

°C or °F

ΔT

Temperature interval or change

K

Δt

Temperature interval expressed on a relative scale

°C or °F

Example or application

A worked example has not yet been added.

Definition

A temperature scale is a defined numerical system for expressing temperature. Temperature conversion is the transformation of a temperature value or temperature interval from one scale to another while preserving its thermal meaning.

Purpose

To provide a consistent method for interpreting and converting temperature measurements across scientific, engineering and everyday temperature scales.

Importance

Temperature conversion is essential in thermodynamic calculations, weather reporting, industrial process control, laboratory measurements, material testing and international scientific communication.

Temperature Scales

ScaleSymbolTypeZero PointWater Freezing ReferenceWater Boiling ReferenceTypical Use

Kelvin

K

Absolute thermodynamic scale

0 K is absolute zero

273.15 K

373.15 K

Thermodynamics, physics, chemistry and SI scientific calculations.

Celsius

°C

Relative scale linked to kelvin

273.15 K

0 °C

100 °C

Laboratory measurements, weather and everyday temperature reporting.

Fahrenheit

°F

Relative scale

Approximately 255.372 K at 0 °F

32 °F

212 °F

Everyday temperature reporting in the United States and some specialized contexts.

Rankine

°R

Absolute scale with Fahrenheit-sized intervals

0 °R is absolute zero

491.67 °R

671.67 °R

Some engineering and thermodynamic applications using customary units.

Absolute Temperature And Temperature Difference

Absolute Temperature

A temperature measured from absolute zero. Kelvin and Rankine are absolute scales.

Temperature Difference

The difference between two temperature readings. Celsius and kelvin intervals have equal magnitude.

Examples

  • 20 °C corresponds to 293.15 K.

  • A rise of 20 °C is a rise of 20 K.

  • A rise of 20 °C is a rise of 36 °F.

  • Absolute temperatures in the ideal gas law must be expressed on an absolute scale.

Conversion Procedure

  • Identify the original temperature scale.

  • Determine whether the quantity is an absolute temperature or a temperature interval.

  • Select the correct conversion equation.

  • Substitute the original value with its unit.

  • Perform multiplication and addition or subtraction in the correct order.

  • Check that an absolute temperature is not below absolute zero.

  • Report the converted value with suitable precision.

Worked Examples

ProblemSolutionAnswer

Convert 25 °C into kelvin.

T = 25 + 273.15 = 298.15 K.

298.15 K

Convert 30 °C into Fahrenheit.

t(°F) = (9/5 × 30) + 32 = 54 + 32 = 86 °F.

86 °F

Convert 98.6 °F into Celsius.

t(°C) = (5/9)(98.6 - 32) = (5/9)(66.6) = 37 °C.

37 °C

Convert 300 K into Fahrenheit.

First, t(°C) = 300 - 273.15 = 26.85 °C. Then t(°F) = (9/5 × 26.85) + 32 = 80.33 °F approximately.

80.33 °F

Convert a temperature rise of 15 °C into Fahrenheit degrees.

For a temperature interval, Δ°F = (9/5) × 15 = 27 °F.

27 °F temperature difference

Special Scientific Considerations

  • The ideal gas law requires absolute temperature in kelvin.

  • Thermodynamic equations involving entropy and thermal energy generally use absolute temperature.

  • Heat-transfer temperature differences may be expressed in kelvin or degrees Celsius.

  • Celsius and kelvin intervals have the same size, but their absolute zero points differ.

  • A temperature interval is not converted using the same offset as an absolute temperature.

  • The symbol K is written without a degree sign, whereas °C and °F include the degree sign.

Common Mistakes

  • Writing degrees Kelvin instead of kelvin.

  • Using 273 instead of 273.15 when the required precision matters.

  • Using Celsius in a thermodynamic equation that requires absolute temperature.

  • Adding 32 when converting a temperature difference from Celsius to Fahrenheit.

  • Applying the absolute-temperature formula to a temperature interval.

  • Confusing Rankine with Fahrenheit.

  • Treating the Celsius zero point as absolute zero.

Limitations And Considerations

  • The Celsius-to-Fahrenheit relationship is affine, not purely multiplicative.

  • Absolute temperature cannot be negative in the ordinary thermodynamic temperature scale.

  • The familiar water freezing and boiling reference points depend on pressure and are not universal fixed points of all practical conditions.

  • Temperature measurements can be affected by calibration, sensor response, thermal gradients and environmental conditions.

  • The numerical conversion does not remove uncertainty in the original temperature measurement.

Scientific Applications

  • Thermodynamic calculations and gas laws.

  • Weather forecasting and climate science.

  • Chemical reaction and laboratory temperature control.

  • Industrial furnaces and thermal processing.

  • Refrigeration and heat-pump engineering.

  • Material testing and thermal expansion analysis.

Related Concepts

  • Thermodynamic temperature

  • Absolute zero

  • Heat and temperature

  • Temperature intervals

  • Thermodynamic equations

  • Measurement uncertainty

Reference

TitleOrganizationUrl

The International System of Units (SI Brochure), 9th edition

BIPM

https://www.bipm.org/en/publications/si-brochure

Guide for the Use of the International System of Units (SI), NIST SP 811

NIST

https://www.nist.gov/pml/special-publication-811

Related Topic

  • Fundamental Principles of Unit Conversion

  • Derived Units in Thermodynamics and Heat Transfer

  • Advanced Unit Conversion, Significant Digits and Rounding

Sources and verification

Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.

  • Source verification pending; check an authoritative textbook, university, standards body, or peer-reviewed source.

Suggest a correction or source · More in Units & Measurement