Many physical relationships are initially unknown or difficult to derive directly from governing laws. Dimensional analysis provides a systematic way to determine the possible form of such relationships when the relevant variables are known.
The method usually begins by proposing a product relationship. Suppose a dependent quantity Q depends on variables x₁, x₂, ..., xₙ. Assume Q = kx₁ᵃ¹x₂ᵃ²...xₙᵃⁿ, where k is a dimensionless numerical constant and the exponents are unknown. Each variable is replaced by its dimensional formula. The resulting expression is compared with the dimensions of Q.
For example, consider the period T of a simple pendulum. Under the assumptions of a small angular displacement and negligible damping, suppose the period depends on pendulum length l and gravitational acceleration g. Write T = klᵃgᵇ. Since [T] = [L]ᵃ[L T⁻²]ᵇ, comparison gives a + b = 0 and −2b = 1. Thus a = 1/2 and b = −1/2, leading to T = k√(l/g). A separate mathematical derivation or experiment gives k = 2π for the ideal simple pendulum under the stated assumptions.
Another example is the speed v of a wave on a stretched string. If the relevant variables are tension F and linear mass density μ, assume v = kFᵃμᵇ. The dimensions are [F] = [M L T⁻²] and [μ] = [M L⁻¹]. Comparing with [v] = [L T⁻¹] gives a = 1/2 and b = −1/2. Therefore, v = k√(F/μ). The ideal wave equation establishes k = 1 under the standard assumptions.
The method depends strongly on the choice of variables. If a relevant variable is omitted, the derived relationship may be incomplete. For example, a pendulum's period at large amplitude is not described completely by a simple constant multiplied by √(l/g); the initial angular amplitude becomes relevant through a dimensionless correction.
When the number of variables is large, a simple product of powers may not fully describe the relationship. The Buckingham π theorem provides a more general approach by grouping variables into dimensionless products. The resulting relationship can be expressed as a relation among dimensionless groups rather than a single power law.
Dimensional derivation does not normally determine numerical constants such as 2, ½ or π. Nor can it generally determine arbitrary functions of dimensionless variables. Those require physical theory, additional mathematical assumptions or experimental data.
Derivation of Physical Relationships Using Dimensional Analysis
Dimensional analysis can be used to derive the possible mathematical form of a physical relationship by expressing an unknown quantity as a product of relevant variables raised to unknown powers. Comparing the dimensions on both sides produces equations for those exponents. The method is powerful for identifying scaling laws, but it generally leaves dimensionless constants and sometimes dimensionless functional relationships undetermined.
Q = kx₁ᵃ¹x₂ᵃ²...xₙᵃⁿ
[Q] = [x₁]ᵃ¹[x₂]ᵃ²...[xₙ]ᵃⁿ
For every independent fundamental dimension: exponent on LHS = exponent on RHS
Explanation
Variables
| Symbol | Meaning | Unit |
|---|---|---|
Q | Dependent physical quantity | Depends on the quantity |
x₁, x₂, ..., xₙ | Independent variables affecting Q | Depends on each variable |
a₁, a₂, ..., aₙ | Unknown powers to be determined | Dimensionless |
k | Dimensionless proportionality constant in the assumed product form | Dimension one |
Example or application
A worked example has not yet been added.
Definition
Derivation of physical relationships using dimensional analysis is the process of determining constraints on an unknown physical equation by expressing its variables in fundamental dimensions and comparing the exponents of those dimensions.
Purpose
To identify the dimensionally permissible form of a physical relationship when the relevant variables are known but the complete equation is not yet established.
Importance
This technique helps researchers develop scaling laws, interpret experiments, formulate engineering correlations and identify the dependence of a quantity on other physical variables.
Assumptions And Conditions
The dependent quantity and all relevant independent variables must be identified.
The selected variables must be sufficient to describe the physical situation within the intended approximation.
The assumed product-of-powers form must be appropriate for the problem.
The dimensions must be expressed using a consistent set of fundamental dimensions.
The dimensional equations must provide enough independent constraints to determine the unknown exponents.
Any dimensionless constants or functions left undetermined must be obtained through physical theory or experiment.
Step By Step Method
Identify the dependent quantity to be predicted.
List the independent variables believed to influence it.
Write a general relationship between the dependent and independent variables.
Assume a product of powers with unknown exponents when appropriate.
Write the dimensional formula of every variable.
Substitute the dimensional formulae into the assumed relationship.
Collect the powers of each fundamental dimension.
Equate the exponents on both sides to form simultaneous equations.
Solve the simultaneous equations for the unknown powers.
Substitute the exponents into the assumed relationship.
Identify any remaining dimensionless constants or functions.
Use physical theory or experimental evidence to determine the remaining information.
Worked Examples
| Problem | Given | Assumption | Solution | Result |
|---|---|---|---|---|
Derive the possible relationship for the period of a simple pendulum using length and gravitational acceleration. | The period T depends on length l and gravitational acceleration g. | T = klᵃgᵇ | Dimensions: [T] = [L]ᵃ[L T⁻²]ᵇ = [Lᵃ⁺ᵇT⁻²ᵇ]. Comparing the time exponent gives −2b = 1, so b = −1/2. Comparing the length exponent gives a + b = 0, so a = 1/2. | T = k√(l/g). For an ideal simple pendulum at small angular displacement, theory gives k = 2π. |
Derive the possible wave speed on a stretched string in terms of tension and linear mass density. | Wave speed v depends on tension F and linear mass density μ. | v = kFᵃμᵇ | [L T⁻¹] = [M L T⁻²]ᵃ[M L⁻¹]ᵇ. For mass: a + b = 0. For length: a − b = 1. For time: −2a = −1. Therefore a = 1/2 and b = −1/2. | v = k√(F/μ). Under the ideal string-wave model, k = 1. |
Derive the possible dependence of drag force F_D on fluid density ρ, speed v and characteristic length L, assuming a simple power-law relationship. | F_D depends on ρ, v and L. | F_D = kρᵃvᵇLᶜ | Dimensions: [M L T⁻²] = [M L⁻³]ᵃ[L T⁻¹]ᵇ[L]ᶜ. Comparing mass gives a = 1. Comparing time gives −b = −2, so b = 2. Comparing length gives −3a + b + c = 1, so −3 + 2 + c = 1 and c = 2. | F_D = kρv²L² for the assumed variable set and power-law form. The coefficient and the validity of this simplified relationship depend on the flow regime and other relevant dimensionless parameters. |
Simultaneous Exponent Equations
Description
A dimensional relationship produces one exponent equation for each independent fundamental dimension. These equations are solved simultaneously.
Example
Assumed Relationship
T = klᵃgᵇ
Dimensional Equation
[T] = [L]ᵃ[L T⁻²]ᵇ
Equations
Length exponent: a + b = 0
Time exponent: −2b = 1
Solution
b = −1/2
a = 1/2
Interpretation Of Results
A positive exponent indicates direct power dependence in the assumed product relationship.
A negative exponent indicates inverse power dependence.
A zero exponent means the quantity does not depend on that variable within the assumed power-law form.
A remaining dimensionless coefficient must be determined by additional physical information.
A result that conflicts with known physical behaviour may indicate an omitted variable or an unsuitable assumption.
Role Of Dimensionless Variables
When additional dimensionless variables influence the phenomenon, the relationship may include an arbitrary function of dimensionless groups. For example, a pendulum's period at larger angular amplitudes can include a dimensionless correction depending on its initial amplitude. A simple dimensional power law cannot determine that function.
Common Mistakes
Omitting a relevant physical variable.
Using an incorrect dimensional formula for one of the variables.
Making an unsupported assumption that the relationship is a simple product of powers.
Solving the simultaneous exponent equations incorrectly.
Treating an unknown dimensionless coefficient as automatically equal to one.
Assuming dimensional analysis proves the complete physical law.
Ignoring the conditions and approximations under which a derived relationship is valid.
Limitations
The method cannot normally determine dimensionless numerical coefficients.
It cannot generally determine arbitrary functions of dimensionless variables.
An incomplete list of variables leads to incomplete relationships.
Different physical mechanisms can produce the same dimensional structure.
The assumed power-law form may not be suitable for every physical phenomenon.
Applications
Deriving scaling laws in mechanics and fluid dynamics.
Developing empirical relationships for engineering systems.
Estimating how physical quantities change when system dimensions change.
Formulating wave, vibration and heat-transfer relationships.
Reducing experimental measurements into dimensionless correlations.
Reference
Buckingham, E. (1914), On Physically Similar Systems; Illustrations of the Use of Dimensional Equations.
NIST, Guide for the Use of the International System of Units (SI), Special Publication 811.
BIPM, The International System of Units (SI Brochure), 9th edition.
Related Topic
Principles and Applications of Dimensional Analysis
Buckingham π Theorem and Dimensional Similarity
Dimensionless Quantities and Dimensionless Numbers
Sources and verification
Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.
- Source verification pending; check an authoritative textbook, university, standards body, or peer-reviewed source.
Suggest a correction or source · More in Units & Measurement