✦ScienexySCIENCE KNOWLEDGE LIBRARY
reference · SCI-REF-003-068

Pressure, Force and Torque Measurement Instruments

Pressure, force and torque are important mechanical quantities measured using instruments based on fluid pressure, elastic deformation, strain, electromagnetic force compensation and other physical principles. Their accurate measurement is essential in mechanical engineering, fluid systems, manufacturing, structural testing and industrial control.

Force

F = ma

Pressure

p = F/A

Hydrostatic Pressure

Δp = ρgh

Torque

τ = rF sin θ

Torque For Perpendicular Force

τ = rF

Strain

ε = ΔL/L₀

Note

Force and torque are vectors or vector-derived quantities. The scalar expressions above represent magnitudes under the stated geometry.

Explanation

Force is an interaction that can change an object's motion or produce deformation. Its SI unit is the newton (N). Pressure is normal force per unit area and is measured in pascals (Pa), where 1 Pa = 1 N·m⁻². Torque is the turning effect of a force about an axis and is measured in newton metres (N·m).

Force can be measured using spring balances, proving rings, load cells and force transducers. Pressure can be measured using liquid-column manometers, Bourdon-tube gauges, diaphragm gauges, capsule gauges, piezoresistive sensors and capacitive pressure transducers. Torque can be measured using reaction torque sensors, rotary torque transducers, strain-gauge shafts and calibrated torque tools.

Pressure measurement requires a clear reference. Absolute pressure is measured relative to a vacuum. Gauge pressure is measured relative to the local atmospheric pressure. Differential pressure is the difference between two pressure points. A pressure instrument's indication is meaningful only when its reference and operating conditions are understood.

Force and torque instruments must be installed and loaded according to their design. Misalignment, side loading, temperature, vibration, friction, hysteresis and calibration errors can affect readings. Pressure systems also require attention to fluid compatibility, leaks, pulsation, temperature and safe operating limits.

Variables

SymbolMeaningUnit

F

Force

N

m

Mass

kg

a

Acceleration

m·s⁻²

p

Pressure

Pa

A

Area

m²

ρ

Fluid density

kg·m⁻³

g

Gravitational acceleration

m·s⁻²

h

Vertical fluid-column height difference

m

τ

Torque magnitude

N·m

r

Lever-arm distance

m

θ

Angle between the position vector and force

rad

Example or application

A worked example has not yet been added.

Definition

Force

A vector interaction that can change the motion of a body or cause deformation.

Pressure

The normal force acting per unit area.

Torque

The moment of a force about a specified point or axis.

Load Cell

A transducer that converts applied force or load into a measurable output.

Manometer

An instrument that determines pressure by balancing it against a liquid-column head.

Bourdon Gauge

A mechanical pressure gauge that uses deformation of a curved elastic tube to drive an indicating mechanism.

Purpose

To measure mechanical loading, fluid pressure, applied forces and rotational effects in scientific experiments, equipment testing and industrial systems.

Importance

Pressure, force and torque measurements are central to structural safety, machine design, hydraulic and pneumatic systems, engine testing, manufacturing and calibration of mechanical equipment.

Pressure Reference Types

Absolute Pressure

Pressure measured relative to an ideal vacuum.

Gauge Pressure

Pressure measured relative to the local atmospheric pressure.

Differential Pressure

The difference between pressures at two specified points.

Vacuum Pressure

A pressure below local atmospheric pressure, commonly expressed as a negative gauge pressure or as an absolute pressure below atmospheric pressure.

Instrument Types

Force

Spring Balance

Uses spring deformation to indicate force.

Proving Ring

Uses elastic deformation of a calibrated ring to determine force.

Strain Gauge Load Cell

Uses strain-induced resistance changes in an elastic element.

Hydraulic Load Cell

Uses fluid pressure generated by an applied load, with a calibrated relationship to force.

Piezoelectric Force Sensor

Uses electric charge generated by mechanical stress and is particularly useful for dynamic force measurements.

Pressure

UTube Manometer

Uses the height difference of a liquid column to determine pressure difference.

Bourdon Tube Gauge

Uses elastic deformation of a curved tube.

Diaphragm Gauge

Uses deflection of a flexible diaphragm.

Piezoresistive Pressure Sensor

Uses resistance changes caused by mechanical stress in a sensing element.

Capacitive Pressure Sensor

Uses pressure-dependent changes in capacitance.

Dead Weight Tester

Generates a reference pressure using calibrated masses and a known piston area.

Torque

Reaction Torque Sensor

Measures torque reacted by a fixed support or housing.

Rotary Torque Transducer

Measures torque transmitted through a rotating shaft.

Strain Gauge Torque Sensor

Measures shaft deformation using strain gauges arranged to respond to torsional strain.

Calibrated Torque Wrench

Applies a specified torque and may include a mechanism to indicate or limit the applied value.

Measurement Procedure

Force

  • Select a force sensor with an appropriate range and direction.

  • Check calibration and mounting requirements.

  • Align the applied force with the sensor's intended measurement axis.

  • Avoid side loads and shock loads unless the instrument is designed for them.

  • Apply force gradually where required.

  • Record the reading and relevant loading conditions.

Pressure

  • Identify whether absolute, gauge or differential pressure is required.

  • Select a sensor compatible with the pressure range and process medium.

  • Check pressure connections, seals and installation orientation.

  • Use suitable isolation or protection where temperature, pulsation or corrosive media may affect the sensor.

  • Pressurize the system within specified operating limits.

  • Allow the indication to stabilize and record the pressure with its reference type.

Torque

  • Identify the torque axis and expected direction.

  • Select a transducer with a suitable range and rotational capability.

  • Install the sensor with correct alignment and coupling.

  • Avoid bending loads and unintended axial forces.

  • Zero and calibrate according to the prescribed procedure.

  • Apply torque within the rated limits and record the result.

Worked Examples

ProblemSolution

A force of 200 N acts normally on an area of 0.020 m². Find the pressure.

p = F/A = 200/0.020 = 10,000 Pa = 10 kPa.

A liquid has density 1000 kg·m⁻³ and a vertical column height difference of 0.50 m. Estimate the hydrostatic pressure difference using g = 9.81 m·s⁻².

Δp = ρgh = 1000 × 9.81 × 0.50 = 4905 Pa ≈ 4.91 kPa.

A perpendicular force of 40 N acts at a lever arm of 0.25 m. Find the torque magnitude.

τ = rF = 0.25 × 40 = 10 N·m.

Measurement Limitations

Force

Load-cell readings may be affected by alignment, temperature, creep, hysteresis, vibration and off-axis loading.

Pressure

Pressure readings may be affected by reference pressure, fluid density, installation height, pulsation, leaks and temperature.

Torque

Torque sensors may be affected by shaft alignment, bending loads, rotational speed, temperature and signal transmission.

Dynamic Measurement

Rapidly changing forces and pressures require sensors with sufficient bandwidth and response time.

Common Mistakes

  • Confusing absolute pressure with gauge pressure.

  • Expressing pressure in newtons rather than pascals.

  • Confusing torque with energy because both may be expressed using N·m.

  • Applying a force off-axis to a load cell.

  • Ignoring the reference side of a differential-pressure measurement.

  • Exceeding the rated range of a sensor.

Applications

  • Hydraulic and pneumatic machinery

  • Structural and material testing

  • Engine and drivetrain testing

  • Industrial pressure monitoring

  • Pump and pipeline systems

  • Torque-controlled assembly

  • Calibration and mechanical laboratories

Reference

  • JCGM 200, International Vocabulary of Metrology (VIM).

  • NIST, Special Publication 811, Guide for the Use of the International System of Units (SI).

  • OIML and relevant ISO standards for pressure and force measurement.

Related Topic

  • Derived Units in Mechanics

  • Mass and Weight Measurement Instruments

  • Measuring Instrument Characteristics and Performance Parameters

  • Advanced Electronic, Digital and Automated Measurement Systems

Sources and verification

Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.

  • Source verification pending; check an authoritative textbook, university, standards body, or peer-reviewed source.

Suggest a correction or source · More in Units & Measurement