✦ScienexySCIENCE KNOWLEDGE LIBRARY
reference · SCI-REF-003-071

Optical and Photometric Measurement Instruments

Optical measurement instruments use light to determine physical quantities such as wavelength, intensity, reflectance, transmittance, refractive index, surface characteristics and dimensions. Photometric instruments measure light according to the spectral sensitivity of human vision, while radiometric instruments measure optical radiation in physical energy terms.

Illuminance

E_v = Φ_v/A

Luminous Intensity

I_v = dΦ_v/dΩ

Radiant Irradiance

E_e = dΦ_e/dA

Transmittance

T = P_transmitted/P_incident

Absorbance

A = −log₁₀(T)

Snell Law

n₁ sin θ₁ = n₂ sin θ₂

Diffraction Grating

d sin θ = mλ

Note

The photometric expressions depend on the specified geometry and photometric conventions. The diffraction-grating relation applies to the usual plane-grating geometry under the corresponding sign and order conventions.

Explanation

Optical measurement is based on interactions between electromagnetic radiation and matter, including reflection, refraction, absorption, transmission, scattering, diffraction and interference. Instruments may use lenses, mirrors, filters, gratings, detectors, lasers and image sensors to obtain measurement information.

Radiometry quantifies optical radiation in terms of radiant energy or power, independent of human visual response. Photometry weights visible radiation according to the standardized spectral luminous efficiency function for human vision. Consequently, radiant power and luminous flux are not interchangeable. A radiometer measures radiant quantities, while a photometer measures photometric quantities such as illuminance or luminous intensity.

Common instruments include photometers, lux meters, spectrometers, spectrophotometers, optical power meters, refractometers, interferometers, microscopes, telescopes, laser displacement sensors and imaging systems. Their performance depends on spectral response, wavelength calibration, detector linearity, optical alignment, stray light, aperture, spatial resolution and environmental conditions.

A measurement must identify the relevant optical quantity and geometry. For example, illuminance is luminous flux incident per unit area, while luminance describes luminous intensity per projected area in a specified direction. A lux meter cannot directly replace a radiometer when the required quantity is radiant power.

Variables

SymbolMeaningUnit

Φ_v

Luminous flux

lm

E_v

Illuminance

lx

I_v

Luminous intensity

cd

Ω

Solid angle

sr

Φ_e

Radiant flux

W

E_e

Radiant irradiance

W·m⁻²

T

Transmittance

Dimensionless

n

Refractive index

Dimensionless

λ

Wavelength

m

θ

Angle

rad

Example or application

A worked example has not yet been added.

Definition

Optical Measurement

Measurement using the properties or interactions of light and other optical radiation.

Radiometry

The science of measuring electromagnetic radiation in terms of radiant energy and power.

Photometry

The measurement of light according to the standardized spectral response of human vision.

Spectrometer

An instrument that separates radiation according to wavelength, frequency or another spectral variable.

Spectrophotometer

An instrument that measures spectral transmittance, absorbance or reflectance under specified conditions.

Illuminance

Luminous flux incident on a surface per unit area.

Luminance

Photometric quantity describing luminous intensity per projected area in a specified direction.

Purpose

To measure optical radiation, characterize light sources and materials, inspect surfaces, determine spectral properties and quantify illumination in scientific, industrial and environmental settings.

Importance

Optical and photometric measurements support lighting design, optical communications, astronomy, spectroscopy, medical imaging, semiconductor manufacturing, materials science and quality control.

Instrument Types

Photometer

Measures photometric quantities such as illuminance or luminous intensity according to its design.

Lux Meter

Measures illuminance in lux at a specified location and orientation.

Spectrometer

Measures the distribution of radiation over wavelength or frequency.

Spectrophotometer

Measures spectral transmittance, absorbance or reflectance.

Radiometer

Measures radiant power or related radiometric quantities.

Optical Power Meter

Measures optical power, commonly in optical-fibre systems.

Refractometer

Determines refractive index using refraction or related optical effects.

Interferometer

Uses interference to measure optical path differences, displacement or surface properties.

Microscope

Uses optical imaging to magnify and examine small structures.

Telescope

Collects and forms images of distant objects using optical systems.

Laser Displacement Sensor

Uses reflected or interferometric laser light to determine distance or displacement.

Photometric And Radiometric Distinction

Radiant Flux

Total radiant power emitted, transmitted or received; SI unit watt (W).

Luminous Flux

Radiant power weighted by the standardized human visual response; SI unit lumen (lm).

Radiant Intensity

Radiant power per unit solid angle; SI unit W·sr⁻¹.

Luminous Intensity

Luminous flux per unit solid angle; SI unit candela (cd).

Irradiance

Incident radiant power per unit area; SI unit W·m⁻².

Illuminance

Incident luminous flux per unit area; SI unit lux (lx).

Radiance

Radiant intensity per projected area; SI unit W·m⁻²·sr⁻¹.

Luminance

Photometric counterpart of radiance; SI unit cd·m⁻².

Measurement Principles

Photoelectric Detection

A detector converts incident light into an electrical signal.

Spectral Dispersion

A prism, grating or interferometric arrangement separates radiation by wavelength or frequency.

Interference

Superposition of coherent waves produces patterns related to optical path difference.

Refraction

Changes in propagation direction at an interface provide information about refractive index.

Absorption

Reduction in transmitted intensity provides information about absorbing materials.

Imaging

Optical systems form images that can be analyzed for dimensions, shape and surface features.

Measurement Procedure

  • Define the required optical or photometric quantity.

  • Select an instrument with a suitable wavelength range, spectral response and measurement range.

  • Check calibration, detector condition and optical cleanliness.

  • Set the measurement geometry, aperture, distance and orientation.

  • Control ambient light and stray radiation where required.

  • Allow the detector and electronics to stabilize.

  • Take background or dark measurements if the method requires them.

  • Measure the sample and reference under comparable conditions.

  • Apply appropriate calibration and correction factors.

  • Record the result, units, wavelength range, geometry and uncertainty information.

Worked Examples

ProblemSolution

A surface receives a luminous flux of 600 lm uniformly over an area of 3.0 m². Find the average illuminance.

E_v = Φ_v/A = 600/3.0 = 200 lx.

A material transmits 25% of incident optical power. Find its absorbance using the ideal transmittance expression.

T = 0.25. A = −log₁₀(0.25) ≈ 0.602.

A diffraction grating has spacing d = 1.0 μm. For first order, the diffraction angle is 30°. Estimate the wavelength.

d sin θ = mλ. λ = (1.0 × 10⁻⁶ × sin 30°)/1 = 5.0 × 10⁻⁷ m = 500 nm.

Measurement Limitations

Spectral Mismatch

A detector whose spectral response differs from the intended standard may produce biased photometric results.

Stray Light

Unwanted light can affect low-level and spectral measurements.

Alignment

Optical measurements can be sensitive to angular and positional alignment.

Surface Properties

Reflectance and emissivity may depend on wavelength, surface finish and viewing geometry.

Detector Linearity

Detector response may deviate from proportionality at very low or high signal levels.

Environment

Temperature, vibration, ambient light and contamination can affect results.

Common Mistakes

  • Confusing lux with watts per square metre.

  • Treating lumen and candela as interchangeable.

  • Ignoring wavelength dependence in optical measurements.

  • Using a lux meter to determine radiant power without an appropriate conversion model.

  • Ignoring the orientation and position of a photometric sensor.

  • Failing to account for background light and stray radiation.

Applications

  • Lighting design and workplace illumination

  • Spectroscopy and chemical analysis

  • Optical-fibre communications

  • Astronomy and remote sensing

  • Microscopy and biomedical imaging

  • Semiconductor and surface inspection

  • Laser measurement and optical metrology

Reference

  • BIPM, The International System of Units (SI Brochure), 9th edition.

  • CIE, International Lighting Vocabulary and relevant photometry standards.

  • NIST, Optical Radiation Measurements publications.

Related Topic

  • Derived Units in Optics, Photometry and Radiation

  • Candela (cd): Unit of Luminous Intensity

  • Measurement of Length, Distance, Area and Volume

  • Advanced Electronic, Digital and Automated Measurement Systems

Sources and verification

Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.

  • Source verification pending; check an authoritative textbook, university, standards body, or peer-reviewed source.

Suggest a correction or source · More in Units & Measurement